I'd go the easier route and use the Valterra kit part # E1003VP for the 3 inch kit since it will make the install much easier. Plastic welding in new fittings can be frustrating so I'd go the easier route! view full answer...
Thanks for the info! It sounds like you have a Coach Step that uses the Control Module # LC301702. I'm attaching a cutout from the manual for the Coach Steps that shows what connections are what - it looks like you've done a good job at labeling pretty much everything!
Usually when you see weird stuff with power (especially a blown fuse) the first culprit to check is the ground. Check the grounds (green wires) and make sure they are securely connected to a clean, bare-metal surface. Any... view full answer...
According to the owner's manual for the 2022 Honda CRV a 2WD model can be dolly towed with the front two wheels up on the dolly. The Roadmaster Tow Dolly with Electric Brakes - 4,250lbs # RM-2050-1 has sliding ramps that can fit a tread width of 34" to 77", so it will easily accommodate your 63" track width.
Because this dolly has electric brakes it does require that your motorhome has an electric brake controller. If you don't have one let me know and I can help find the correct parts... view full answer...
Yes, since the Wheel Masters 2-Hose Inflation Kit # WM8005 is NOT an airless kit it will have air pressure in the lines which will allow a tire pressure monitor system to easily work with it.
I attached an install video for this kit for you to check out as well. view full answer...
Go To Results