The serial number for the etrailer 3,200-Watt Portable Inverter Generator # 333-0002 can be found on the one of the white and black stickers on top of the generator (see pictures).
The instructions for registering your product can be found on page 29 of the linked instructions. view full answer...
Nope; to install a brake controller on a 2014 Infiniti QX60 you will need to start by adding a 4-way # 118670 as well as the Universal Installation Kit for Trailer Brake Controller # ETBC7, which comes with the rest of the necessary components to add a brake controller, such as a 4-to-7-way adapter and circuit breakers. I've added a link to a video review of this kit for you to check out.
As for the brake controller itself, I strongly recommend the Prodigy P3 # 90195; it is the most popular... view full answer...
To install the Prodigy P3, part # 90195 on your Infiniti QX60, you will just need to run the wires in the following manner.
Attach the Blue wire from the trailer connector to the blue wire at the back of the brake controller. Then attach the black wire from the brake controller to the positive battery post using a 20-amp circuit breaker like part # 9506P.
Then run the white wire from the brake controller to the negative battery post.
The red wire needs to be attached to the stoplight... view full answer...
I was unable to locate the comments you were referring to specifying that newer models of the Infiniti QX60 such as your 2017 would not need all of the parts, and the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56281 cannot be sold in individual parts so you would need the entire kit. view full answer...
We've never heard of a hitch receiver decreasing the value of a vehicle. Many hitches, such as the Draw-Tite # 76031 that you referenced for a 2014 Infiniti QX60, do not reduce the frame's integrity since they do not require drilling. They're actually using an existing hole and filling it with a bolt.
In the event a specific hitch does require drilling that drilled hole will also then be filled by a bolt.
On the other hand, depending on who is purchasing the vehicle, adding a hitch... view full answer...
While you can technically install a roof rack like the Rhino-Rack Vortex # RRVA137B-2, # RRRLKVA, and # DK339 where you want on the roof of your 2014 Infiniti QX60, Rhino-Rack has done testing and approved the locations of the crossbars for specific locations (which you can see in the attached installation instructions). If you were to install it elsewhere on your roof then the crossbars wouldn't sit level, there could be interference with something on your vehicle, and the 165 lb weight... view full answer...
I spoke with my contact at Tekonsha and he confirmed that the wiring harness # 3050-P is the correct harness to install your brake controller in your 2014 Infiniti QX60 with factory Tow Package. Simply plug one end of the adapter into your brake controller and then plug the other end into the junction box beneath your vehicle's dashboard.
For install details and some product demonstration videos, click the provided links. view full answer...
I talked to Rhino Rack in regard to you upgrading your 54" Vortex Crossbars # RRVA137B-2 to the 59" Vortex Aero Crossbars # RRVA150B-2. I was told that you need to install the legs about 63.5mm (2-1/2") from the strip. You could also just set the longer bars in place and make sure it is completely centered on each side then attach the legs. I attached a demonstration video for you to check out. view full answer...
The Curt Trailer Hitch Receiver # C13126, which is a confirmed fit for your 2014 Infiniti QX60, does not require the use of a stabilizer strap to keep in accordance with the warranty.
However, if your Allen bike rack doesn't have an anti-rattle device built-in or included you may want to use a strap, like part # 18050, or a device like the Roadmaster Quiet Hitch # RM-061.
Installation instructions ave been attached for you to reference on the Curt trailer hitch. view full answer...
Although you won't be able to just wave your foot under the back of your 2017 Infiniti QX60 to activate the hands-free liftgate function, you will still be able to easily activate it by performing a kicking motion (like you are kicking a football) to the left or right side of the trailer hitch receiver.
The trailer hitch receiver that I recommend for your QX60 is the Draw-Tite Max-Frame Trailer Hitch Receiver # 76031 due to the higher weight capacities (900 lbs TW and 6,000 lbs GTW) that... view full answer...
When installing the Draw-Tite Class IV Custom-Fit Trailer Hitch, # 76031, the bumper fascia will not need to be trimmed. The installation instructions do not list trimming the bumper fascia as one of the steps of the hitch installation.
This hitch when installed will sit below the bumper and will not interfere with any of the body molding of the vehicle.
As for installing this hitch on a lease vehicle, I recommend checking with the dealer that you purchased the car from to see if they... view full answer...
You will still be able to use the hands-free lift gate sensor on your 2017 Infiniti QX60 with the Draw-Tite Max-Frame # 76031 installed. It won't be necessary to move it; simply perform a kicking motion and the lift gate feature will perform as usual.
I have added a link to a video install of this hitch for you to take a look at. view full answer...
There is no fascia trimming required to install Draw-Tite trailer hitch # 76031 on your 2016 Infiniti QX60! I have included a link to the installation instructions for you so you can see the steps.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the... view full answer...
Go To Results