If you ordered adapter # 3026-P with the brake controller, then this is the correct plug for the 2008 Saturn Outlook. On some vehicles, there is an extra wire for illumination of the brake controller, just in case a particular brake controller requires it. As long as the brake controller works correctly when you plug it in, you are good to go. view full answer...
The brake controller would connect to the wires under the dash as follows:
Orange vehicle wire connects to black wire from brake controller.
Black vehicle wire connects to white wire from brake controller.
Dark blue vehicle wire connects to dark blue wire from brake controller.
Light blue vehicle wire connects to red wire from brake controller.
The remaining wire is for an illumination circuit which is NOT needed for the brake controller. The extra wire can be taped off and bundled up... view full answer...
No, you will not have to uninstall and then reinstall the wiring on your current 6-Way or 7-Way wiring harness to use the Trailer Connector Mounting Box part # 18159. view full answer...
The installation of Draw-Tite # 75528 may be different in the 2014 GMC Acadia than the 2009 Saturn Outlook. Per the instructions:
"Install Central Fasteners – Install fasteners in central receiver bracket.
a. With Bumper Weldnuts – (2) M12 bolts and (2) 1/2” conical washers
b. Without Bumper Weldnuts – (2) 1/2” bolts, (2) conical washers and (2) handle nuts."
You are going to want to use new hardware for your installation and not transfer the hardware from one vehicle to the next. Replacement... view full answer...
Go To Results