In regards to the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118284 which is a fit for a 2017 Lincoln MKC, the green wire for the passenger side taillight will need to be connected to the violet/orange wire. If there are multiple wires with this color sequence then you'll have to test each to determine which is correct. If you probe the wires with a test light and apply the turn signal and or brake light, you'll be able to find the correct circuit. view full answer...
So I did some research and it turns out that the harness you're looking for, to plug in your Hopkins Plug-In Simple Wiring Harness for Factory Tow Package # HM11140694 is located inside the cargo area behind the closest trim panel to the liftgate on the driver side.
You're going to need a trim remover tool to pry and remove the rear panel. From here, you'll be able to spot the harness and can continue with the install. view full answer...
The only video we have for Curt wiring harness # C56262 is just a review video going over its features. The Curt harness plugs into wiring that is behind panels in the cargo area on the 2015 Lincoln MKC. I have included a link to the installation instructions for you. view full answer...
No drilling is required on the 2015 Lincoln MKC to install Curt trailer hitch # C13194. But access holes may need to be enlarged which can be done with a drill or rotary tool. You could also use hand tools such as a file to enlarge the holes. I have included a link to the instructions for you.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop.... view full answer...
Yes, the hands-free liftgate on your 2017 Lincoln MKC will still work when the Draw-Tite Trailer Hitch # 75943 is installed.
It will be necessary for you to kick your foot on either side of the hitch receiver (the middle of the hitch) but you will not need to relocate or disable the sensor. I have added a link to a video of this hitch being installed on a MKC for you to take a look at.
If you are going to be towing you can add wiring which will give you a 4-way connector and allow you... view full answer...
Go To Results