Expert Answers about Mitsubishi Lancer

• Installing Curt Class I Receiver Hitch on 2005 Mitsubishi Lancer
• As of yet, we haven't had the opportunity to install the Curt Class I receiver hitch, part # C11476 on a 2005 Mitsubishi Lancer. I'll link you to the installation instructions, so you can look them over. The installation involves using a fish wire to pull installation bolts into place, so I'll link you to a video that will run you through that process. I've looked over the installation instructions, and they look pretty straightforward. If you're planning on towing with the hitch, be sure...
  view full answer...


• Installation Instructions for Curt Class I C11328 Trailer Hitch on 2015 Mitsubishi Lancer
• If you click the provided link, you should be able to see a .pdf copy of the instructions for the Curt # C11328 Class I trailer hitch for your 2015 Mitsubishi Lancer. If you'll be using the hitch as an attachment point for a bike rack or other hitch-mounted accessory, you'll need to use a # 18050 stabilizing strap to retain the hitch warranty. I've linked you to a video showing how the stabilizing strap works.
  view full answer...


• What Keeps Bolt from Turning in Frame for Trailer Hitch Installation on a 2006 Mitsubishi Lancer
• The short answer is you don't! The longer answer is that there will also be a block fishwired in and the bolt will go through the block and the hole in the frame. The block prevents the bolt from turning because it can't fully rotate within the frame. The block has a square hole in it and the bolt head has a square part that will fit in that square hole so the bolt also cannot spin within the block. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then...
  view full answer...


• Trailer Hitch Installation On 2015 Mitsubishi Lancer GT
• The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24885 is a confirmed fit for your 2015 Mitsubishi Lancer GT as long as you don't have the dual exhaust. There is no drilling required to install this hitch. The installation instructions state you will need a jig saw, cut-off wheel, or die grinder for enlarging the hole already present in the frame for the carriage bolt and block on the passenger side. I've attached the installation details which state...
  view full answer...