Expert Answers about Volkswagen Jetta

• Replacement Lippert Jack Plus Install Tools
• I reached out to my contact at Lippert parts and found out that the Lippert # LC285318 electric jack does not have a replacement drop foot. To replace this you could install another Lippert LC285318 which you know will be a perfect fit, or you could check out the Lippert # LC643589 "Smart" Electric Jack. the smart jack has better lighting and remembers tongue possitions for quick and easy hook up. If you decide not to run the old wires all the way to the terminal, you will need connectors...
  view full answer...


• How Do You Replace Burned Out Bulbs of a Bulb and Socket Flat Towing Wiring Kit
• In the event of a burned out bulb on the Roadmaster Tail Light Wiring Kit part # RM-155 you would need to remove the socket from the back of your light assembly, change the bulb, clean off the old RTV and then reapply new RTV to reinstall the socket. The inside of the housing does have reflectors to help make the light more visible. However, the bulbs of this kit are very bright and I can assure you they will be visible. If you check out the video I attached and fast forward to the 7:15...
  view full answer...


• Saris Bones 3 Trunk Bike Rack Fit on 2017 Volkswagon Jetta 4-Door Sedan
• I confirmed with Saris that their Bones 3 Trunk-Mount bike carriers, such as # SA801BL that you referenced, are confirmed fits on your 2017 VW Jetta 4-door sedan. They have no customer fit notes indicating problems with the bottom hooks, so my contact there recommended use of their Hatch Huggers # SA3035. These replace the bottom hooks and provide you with a safe alternative installation for your Bones rack.
  view full answer...


• No Trailer Lights Using TowReady T-One Vehicle Wiring Harness for 2008 Volkswagen Jetta
• There are several potential causes for the problem you are having with the trailer lights not operating. The best method to troubleshoot is to first determine if the problem is on the vehicle side or the trailer side. You can start by disconnecting the Jetta from the trailer. Apply a circuit tester such as # PTW2993 to the pins on the vehicle 4-pole connector while a helper activates the various lighting functions one by one. Please refer to the linked photo that shows the functions carried...
  view full answer...


• Why Is My Roof Rack On My 2019 Volkswagen Jetta Allowing Water Inside?
• The first thing you can do, is double check the instructions and ensure that the feet are installed correctly. Something as simple as the feet being improperly spaced, or if everything is not tightened down completely, could lead to the issue you're having. If you've checked that that is all good, then you can put a strip of duct tape like # PT23ZR over the base of the foot to give it a tighter seal. However, realistically if the dealership installed this roof rack, they need to be the...
  view full answer...


• Trouble Connecting the Inside Cable on Snow Cable Chains on a 2009 VW Jetta with 205/55-16 Tires
• The Glacier Cable Snow Tire Chains, (DISCONTINUED) PW1930V, (Now PW10300) that you referenced are the correct size for the 205/55-16 tires on your 2009 VW Jetta. There is a possibility that the tire brand on your Jetta is constructed differently than standard 205/55-16 tires and you would need to order a different size chain. The first thing to do is make sure you are installing the cables in the correct order. You should connect the inside cable, with only one stop, behind the tire first...
  view full answer...