Expert Answers about Infiniti JX35

• Will Installation of Trailer Wiring Harness on 2013 Infiniti JX35 Take a Long Time
• The Curt Powered Tail Light Converter Kit with 4-Pole Flat Trailer Connector # C56190KIT that fits your 2013 Infiniti JX35 will take a different amount of time for different people, depending on how comfortable they are with wiring, but it is safe to assume that you will need at least hour to install it. One thing that will help reduce the install time is the video we made showing this kit being installed on a '13 JX35, which I have linked for you. This trailer wiring, along with the Draw-Tite...
  view full answer...


• Trimming Rear Fascia to Install a Trailer Hitch on a 2013 Infiniti JX35
• Yes you are correct. From the center you would measure to the left 1-1/4 inches and to the right 1-1/4 inches. The area that needs to be trimmed on your 2013 Infiniti JX35 is 2-1/2 inches by 1-3/8 inches. There is a diagram in the instructions which I have linked for you to the right. To complete your towing set up I recommend etrailer ball mount kit # 989900. It includes 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. And for trailer wiring use # C56190KIT.
  view full answer...


• How Does the Draw-Tite Max-Frame Trailer Hitch Receiver Install on my 2013 Infinity JX35
• This is definitely a hitch that can be installed at home. I have included the installation video my buddy Evan did installing the hitch on a 2013 Infinity JX35 like yours. It uses factory weld nuts to attach it to the vehicle. If yours is equipped with a factory tow hook that will need to be removed but it is a very easy process.
  view full answer...


• Does the Rear Fascia of a 2013 Infiniti JX35 Need to be Trimmed to Install a Curt Hitch # C13126
• Yes, you will need to modify the rear bumper of your 2013 Infiniti JX35 to install the Curt Trailer Hitch # C13126. If you check out the installation instructions that I attached for this hitch you will see that the vehicle they use in the instructions is a JX35 like yours and will require the bumper to be modified. The hitch opening will hang right below the bumper, but the majority of the hitch will be out of plain sight.
  view full answer...


• Locating Tail Light Wires on a 2013 Infiniti JX35 to Install the Curt 3 Wire to 2 Wire Converter
• The Curt Universal 3 Wire to 2 Wire Harness, # C56190, that you purchased was designed to connect directly to your vehicles tail light circuits. This wiring harness was not designed to connect to a specific box or connector on any particular vehicle. You should be able to access the tail light circuits on your 2013 Infiniti JX35 either directly behind the tail light assemblies, or you may be able to find the behind the trim panels in the rear cargo area on the driver and passenger side...
  view full answer...


• Does Bumper Fascia of 2013 Inifiniti JX35 Need to Be Modified to Install a Hitch
• Whether you'll need to modify the bumper fascia or not will depend on which hitch you choose. The nice thing about the Curt Class III you mentioned, part # C13126 is that the entire hitch with the exception of the receiver opening is concealed behind the vehicle bumper. According to the installation instructions, a small (1-3/8 x 2-1/2 inch) area of the underside of the bumper fascia would need to be trimmed away. I've linked you to photos showing the area that would be trimmed and how...
  view full answer...