Expert Answers about Saturn Ion
- Can Draw-Tite Base Plates Be Moved From a 2006 Saturn Ion to a 1996 Geo Tracker
- I know that Draw-Tite used to offer a car-mounted tow bar, which used base plates that were bolted directly to the vehicle. Is this the tow bar style you have? If so, this tow bar uses universal brackets, so you would be able to move the brackets from one vehicle to another. Our part # 63180 is basically the new version of this tow bar. Be aware that the # 63180 tow bar is rated for towing speeds up to 45 MPH only.
I would recommend inspecting the base plates and making sure they are still...
view full answer... - Recommended Bike Rack for a Single Rad 6 Bike w/ Fenders for Class I, II, and III Hitches
- Yes, your Rad 6 bike with fenders will be stable inside the Thule T1 Bike Rack for 1 Bike item # TH9041 with the arm positioned on the wheel in front of the fender.
This wheel mounted bike rack has a 60 lbs capacity and fits both 1-1/4" and 2" receivers Class I, II, III. The integrated cable lock secures your bike to the rack.
You will want to clamp the arm onto your wheel as close to the fender as possible. I have linked a picture below that will show this bike rack being used with...
view full answer... - Trailer Hitch Receiver Fit For 2006 Saturn Ion Red Line
- While we do have a trailer hitch receiver fit for your 2006 Saturn Ion Red Line, the # 75278 will not fit the Red Line models. Instead, there is a different hitch that is designed to fit your Red Line:
- Draw-Tite Sportframe Trailer Hitch Receiver # 24756
view full answer... - Trailer Wiring Harness for a 2003 Saturn Ion
- The only trailer wiring harness for your 2003 Saturn Ion is the Curt T-Connector # C56036 which tees into the wiring connectors behind your tail lights. So while it isn't a true plug and play connector, this kit doesn't require splicing into your OEM wiring so it is the next best thing. Plug and play usually means that there is a connector at the reach of the vehicle within reach so you don't have to get behind your tail lights.
If you don't already have a trailer hitch installed on your...
view full answer... - Are There Bearing Buddy Bearing Protector Grease Caps Compatible with Harbor Freight Utility Trailer
- Harbor Freight trailers are unique. They don't have any industry standard parts on them, so replacement parts are very difficult to find. We don't have any grease caps that will fit your 2-inch hub. It may be possible to replace your hubs with a different one that will fit your spindle measurements, but you'd need to use a digital caliper to check the spindle at the bearing locations and the grease seal.
view full answer... - Can i Carry A Kayak On The Roof Of My 2007 Saturn Ion
- I will be able to get you setup with with a roof rack for your 2007 Saturn Ion. You will have to go with the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long - Black, part # 298-SX6000B, since there is not a traditional roof rack that is compatible with your vehicle. It is a vacuum cup roof rack that has a weight limit of 165 lbs, but you should also check your owner's manual to find out how much weight you can carry on the roof of your vehicle. Once you have that weight, you...
view full answer... - Will Kuat Beta Bike Rack Fit 2006 Saturn Ion 3 with Curt Class I Trailer Hitch
- You will not need a hitch extender for the Kuat Beta on your 2006 Saturn Ion 3. The Kuat Beta # B202-114 measures 10-1/2 inches from the center of the hitch pin hole to the back of the upright bar. Since the bike rack has a rise shank, you will want to make sure there is room for the shank rise to clear the bumper. The shank rise on the Beta is approximately 3-1/2 inches, and the rise begins about 5 inches out from the hitch pin hole.
As long as the hitch receiver is not tucked up closely...
view full answer... - Recommended Roof Rack for 2006 Saturn Ion 3 Four Door
- We carry roof racks manufactured by Inno that will fit your 2006 Saturn Ion. The Inno roof racks use a clamp to attach the feet to the roof of the 2006 Saturn Ion. Inno has both square bar and aero bar roof racks that will fit on your car.
I recommend the Inno Aero Bar Roof Rack # INXB130-2, # INXS250, and # INK214. The Inno Aero Bar Roof Rack is constructed of sturdy aluminum and has a weight capacity of 100 lbs. The aero bar and low profile design allows for optimum aerodynamics to help...
view full answer...
Go To Results