Expert Answers about Jeep Gladiator
- Replacement Hardware Kit for a 15,000 lbs Curt TruTrack Weight Distribution System
- No, you will need to use the Replacement Hardware Kit item # C17554. This one is rated to be used with your 15,000 lbs Curt TruTrack Weight Distribution System item # C17501.
The Replacement Hardware Kit for Curt TruTrack Weight Distribution System w/ Sway Control item # C17550 tops out at 10,000 lbs.
view full answer... - Will Demco SBS Stay N Play Override Stoplight Circuit of Tow Bar Lighting
- If your 2020 Jeep Gladiator activates the brake lights when the brake pedal is pressed with the key off then with the install of the SMI DUO part # SM99251 you will also need to install the brake lite relay part # RM-88400 so that the stoplights of the vehicle do not override the taillight circuits of the tow bar lighting kit you have installed.
Its hard to say how long the battery would last but you can use the charge kit part # RM-156-25 to keep the battery topped off when travelling.
view full answer... - Recommended Base Plate for a 2023 Jeep Gladiator Rubicon
- Hey Reggie!
Would you be able to shoot me a photo of the sticker on your Blue Ox tow bar? I tried looking up that part number but wasn't able to find anything.
Your 2023 Jeep Gladiator Rubicon has a curb (unloaded) weight of 5,050 lbs so unless you have one of the lower-end Blue Ox bars you should be just fine. If you can send me a photo of the sticker though I'll be able to look into this a little further for you.
If you don't already have a base plate kit then the Blue Ox Base Plate...
view full answer... - Are Yakima HD Track Adapters # Y75RR Required to Install OverHaul Ladder Rack On 2021 Jeep Gladiator
- If you are wanting to install the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-58 on a set of Yakima 60" HD Tracks # Y74MR then you will need to use the Yakima HD Track Adapter Kit # Y75RR. Those are needed since you are going to have the BAK Revolver X4s Hard Tonneau Cover # BAK88ZR which is mounted on the inside of the bed rails where the Overhaul would typically mount.
view full answer... - Is The Curt C96JR Tail Light Kit Compatible With A Brake Buddy Brake System?
- Hello John. The # C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part # HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get something else.
view full answer... - 2020 Jeep Gladiator Flat Tow Parts Recommendations
- Hey Michael, thanks for reaching out!
Here are the parts I recommend for flat towing your 2020 Jeep Gladiator Rubicon:
- Direct-Connect Base Plate Kit # RM-521453-5
- Roadmaster Nighthawk All-Terrain Tow Bar # RM-676
- Universal Wiring Kit # RM-154
- Stop Light Switch Kit # RM-751497
- Demco Stay-IN-Play Duo Flat Tow Brake System # SM99251
- High-Low Adapter (see attached article)
I really like the Roadmaster Direct-Connect system because it's really easy to connect, and then the...
view full answer... - Parts Needed to Flat Tow 2022 Jeep Gladiator Rubicon
- Hey Mike, so the easiest to use base plate kits are the Blue Ox ones so for your 2022 Jeep Gladiator Rubicon the base plate you would want is the part # BLU53FR which fits the factory steel and plastic bumpers. If you went with an aftermarket bumper I can't guarantee this would work though.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the...
view full answer... - Can the Curt Custom Tail Light Wiring Kit Be Used With LED Lights
- The Curt Custom Tail Light Wiring Kit for Towed Vehicles # C96JR can be used with your LEDs, the only caveat is that if your Jeep has ParkSense proximity sensors then you'd need to use the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7 instead.
view full answer... - Blue Ox Parts Needed to Flat Tow 2022 Jeep Gladiator Rubicon
- Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part # BX4375. is the part # BLU53FR.
For lighting you can use # C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the taillight connectors.
Then for the braking system the Air Force One part # SM99243 would be what you would want and you'd be set.
view full answer... - Can I Use A Universal Diode Kit On A 2020 Jeep Gladiator Rubicon?
- Hey John, we have not heard of any issues with the universal diode kits on a 2020 Jeep Gladiator Rubicon. All of our records show that you will not need any kind of relay. I recommend going with the # RM-15267 diode kit since it uses a 6-pin round plug for the front of the Jeep.
view full answer... - Are Buyers Products Fender Guard Mud Flaps part # 337B1020PPB Easily Cuttable
- Hey Stephen, essentially the Fender Guard Mud Flaps part # 337B1020PPB are made from a hard plastic that is somewhat flexible. So cutting it wouldn't be too bad. I would maybe try tin snips as that would most likely cut through them pretty easily.
view full answer... - Is TruXedo Elevate Ladder Rack Adjustable Along Rails
- Yes, the uprights on the # TX84NV are adjustable along the channel on the rails. All you have to do is loosen the nuts and slide them along to wherever they need to be. This is just the part number for the rack itself. You will need the # TX58NV which includes the ladder rack and rails for your 2021 Jeep Gladiator.
view full answer...
Go To Results