According to Hollywood Rack, the Hollywood Racks Over-the-Top 2 Bike Carrier part # HRF2 can be installed on your 2016 Mercedes-Benz GLA-Class using the included hatch hugger straps. There will not be any downward pressure on the spoiler with the hatch huggers so even if you do not have side rails on your GLA, you can still use this bike rack.
I have attached a photo for you that shows how the hatch huggers will look once installed so you can see there is no contact with the spoiler. view full answer...
Thank you for your picture. The Inno Roof Rack Kit # INB117, # INXP, # INTR162 definitely fits your 2018 MB GLA250.
It looks like you have the Rhino-Rack Nautic Roof Kayak Carrier w/ Tie-Downs # RR570 which are compatible with square bars like this Inno rack. The # INB117 dimensions are 46" long x 7/8" tall x 1-1/4" wide and the maximum crossbar dimensions for the Rhino Rack Carrier is 3-7/8" wide x 1-3/8" tall. You'll need a minimum crossbar spread of 23-9/16" for these Rhino Rack... view full answer...
The Hatch Huggers for Saris Trunk Mount Bike Racks part # SA3035 that you referenced are an alternative for the metal coated hooks that are included with most Saris trunk mount bike racks. They are used when the hooks would be attached to a glass or plastic surface to prevent damaged. The problem you have with your 2018 Mercedes-Benz GLA-250 is that the straps would create too much downward pressure on the spoiler which would in turn cause damage. Therefore, the Hatch Huggers nor will any... view full answer...
The ZCI Circuit Protected Vehicle Wiring Harness, part # 119250KIT is a fit for your 2015 GLA250.
This kit installation is very simple by clamping the sensors on to the existing vehicle wiring without cutting or splicing. The harness includes the module that protects the vehicle wiring and has no power draw from the vehicle electrical system. view full answer...
Since your 2015 Mercedes Benz GLA-Class has a 2" hitch receiver, the Bulldog Lifelong Trigger-Style Coupler Lock and 2" Trailer Hitch Receiver Lock # BD580404 will fit on your hitch as long as the outside measurements on the tube are not greater than 2-1/2". When it comes to the coupler lock, as long as the trigger-latch on your coupler is not wider than 3/4", the included coupler lock will also work on your Wesco trailer (this is the most common trigger latch size).
These locks are designed... view full answer...
The Yakima SkyBox 21 Rooftop Cargo Box # Y07337 referenced in your question is compatible with round, square, aero, elliptical and most factory crossbar roof rack systems.
If you have roof rack crossbars already installed on your 2017 Mercedes-Benz GLA and they are less than 3-1/2 inches wide and 1-11/16 inches tall, the Yakima cargo box will work great.
If you do not yet have a roof rack installed and your vehicle has flush mounted rails that run front to back, I recommend the Thule... view full answer...
Yes, the Inno Square Crossbar Kit including parts # INB117, # INXP, and # INTR162 are a confirmed fit for your 2018 Mercedes GLA45 AMG.
We can't recommend using duct tape between the mounting feet and your factory rails. The rack was designed to fit to the factory flush mounted rails so an additional material between the two could affect it's hold and reliability. These feet are designed to fit without scratch or damage so you can feel good about this solution.
I have also included... view full answer...
Yes, the Draw Tite trailer hitch part # 75223 that you referenced is a confirmed fit for your 2018 Mercedes Benz GLA 250 and would work well.
For trailer wiring you'd then want the part number # 119250KIT which is a confirmed fit as well.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch... view full answer...
Installing a trailer hitch, like the Curt # C13197 that you referenced, on a vehicle like your 2018 Mercedes-Benz GLA-250 with the foot activated tailgate will slightly interfere with the activation.
Typically you will wave your foot right where the hitch receiver sits. When you install a trailer hitch you will simply need to kick straight out to the left or right of the receiver openening to activate your tailgate.
Installation instructions have been attached for you to reference, but... view full answer...
All tire chains fit multiple tire sizes. The Konig Low-Pro chains # TH04115103 that you referenced fit several sizes but they do not fit your 235/50R18 tires. Chains that do fit your tire size appear on the linked page. These are all low-profile S-Class chains that feature automatic tension control for the most secure installation on your 235/50R18 tires.
The compatible Konig chains most similar to those you looked at are their K-Summit chains # TH02230K45. These are premium-quality chains... view full answer...
The Hollywood Racks Over-the-Top, part # HRF2 would work great on your GLA250.
This bike carrier is designed especially for vehicles that have a rear spoiler like your SUV has. The # HRF2 can carry 2-bikes that weigh up to 35-lbs each. The rack will fold up for easy storage when not in use.
If you plan on carrying three bikes you can use part # HRF2-3.
If you are planning on carrying bikes with alternative frames like kids bikes or women's bikes I recommend using an adapter bar like... view full answer...
Go To Results