The Curt ATV Towing Starter Kit # C45038 may fit your 2018 Honda FourTrax Rancher though it is not designed as a specific fit for ATVs.
Does your Rancher ATV have a tongue like in the accompanying photo? If so it will simply bolt onto that tongue, which is what would be required for this to fit on your Honda. I took a look at a bunch of photos of this ATV and was unable to determine if it has the tongue but a quick glance at the rear of your ATV and you should be able to tell pretty quickly.
I... view full answer...
The longer 2-1/2" torx screw Item # TFX250ACQ will work the best to attach the boards to the metal frame of your Big Tex trailer when replacing the trailer deck.
If you need a torx head screwdriver bit, you can use part # TX430-1. view full answer...
For your 2015 Honda Foreman you can use Bulldog winch mount # BDW15181 and mating 3000-lb model # SW1130220. These and other recovery winches that for this mount can be seen on the linked page. The two linked articles on winches may be of interest to you as you decide on your preferred winch model. view full answer...
The correct custom winch mount kit for your 2017 Honda FourTrax Rancher is part # BDW15114 if it has the independent suspension or part # BDW15181 if it has the solid axle.
With these mounts you can use winches such as # BDW15001 (1-horsepower and rated for 2000-lbs) or # BDW15002 (1.2-horsepower and rated for 3000-lbs). The Superwinch LT2000 winch 1220210 mounts with a 2-bolt pattern spaced apart 3.15-inches; at most you may need a drill a new hole in the mount to use this winch.
The... view full answer...
What keeps the Reese Towpower 3-Way ATV Hitch # RP7065000 from turning is torquing down the install bolt which prevents it from being able to swivel. This will prevent it from swiveling when backing up as well. I attached a review video for this hitch for you to check with more info as well. view full answer...
I'm not able to find any information on an L44549 bearing so it's very likely that what you have is actually the # L44649 bearing. We have actually seen this before where the 6 on the number gets worn a bit so that it looks like a 5 when it's taking out of the hub.
To be sure you can also measure the inside diameter of your bearing. If you get an inside diameter of 1.063 inches then you know it's the # L44649.
Unfortunately the picture you mentioned did not come through but if you can... view full answer...
Yes, to install the Superwinch part # SW1125220 that you referenced on your 2016 Honda FourTrax Foreman Rubicon you would want the mount part # BDW15181. view full answer...
I checked with Bulldog winch and the part # BDW15181 has been confirmed as a fit for your 2016 Honda Rancher 420 so it would work well.
This would also fit and work well with the Superwinch LT3000ATV Winch # SW1130220 that you also referenced. This winch does come with a handlebar mounted rocker switch as well. view full answer...
Within each set, the 3 different locks would be keyed alike. If you needed similar locks that are keyed differently, we offer some etrailer.com branded locks that would work great for you.
etrailer Trailer Flat Lip Trailer Coupler Lock for 1-7/8 or 2 inch balls # e98897
etrailer Adjustable Trailer Coupler Latch Lock # e98883
etrailer Trailer Hitch Receiver Lock # e98880 view full answer...