Expert Answers about Suzuki Forenza

• Parts Needed to Flat Tow 2005 Suzuki Forenza Sedan
• The Blue Ox base plate kit part # BX3521 only fits the sedan models of the 2005 Suzuki Forenza. We actually don't have any kits that fit the wagon models. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the Blue Ox Avail # BX7420 which comes with safety cables. The coiled design helps keep the cables off of the ground. For lighting you can...
  view full answer...


• No Trailer Running Lights, Brown Wire Causing Short on a 2007 Suzuki Forenza
• The brown wire on wiring harness # 119178KIT or # C56175 for your 2007 Suzuki Forenza is for the running lights so if it is not connected then that would be why the running lights are not working on the trailer. So the question now is why does connecting the brown wire cause a short? There could be more than one wire that carries a running light circuit. Make sure to test the wires with the included circuit tester to figure out which wire(s) carry the running light circuit on your vehicle. You...
  view full answer...


• Trailer Hitch, Accessories, and Wiring for a 2006 Suzuki Forenza
• Curt trailer hitch # C11481 will fit a 2004 to 2008 Suzuki Forenza so it will also fit your 2006. If you plan on doing any towing with this vehicle be sure to consult the owners manual to make sure it can tow and to determine the vehicle capacity. The correct ball mount is # C45521 and you can use pin and clip # PC2. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # 119178KIT. I have linked instructions for the wiring and the hitch for you.
  view full answer...


• Does Curt Hitch part # C11481 Fit 2006 Suzuki Forenza
• Yes, the Curt hitch part # C11481 that you referenced is a confirmed fit for your 2006 Suzuki Forenza Wagon. I checked with Curt and they said it will fit your vehicle.
  view full answer...


• Trailer Hitch Installation Method for Curt Class I Hitch # C11481 on 2006 Suzuki Forenza
• We do indeed offer a 1-1/4-inch Class I hitch for your 2006 Suzuki Forenza, Curt part # C11481, which is a bolt-on product. This hitch includes the hardware you'll use to bolt it in place to existing mounting holes on your Forenza's frame. No drilling or welding are required. I have linked two helpful hitch installation articles, along with the instructions from Curt, to simplify the installation for you. You will need a torque wrench to install the fasteners to the required specs as noted...
  view full answer...