The portion of the Putco Push-Up Tie-Downs # P99901 that goes into the pocket on your 1950 Chevrolet 3100 will be 1-3/8 of an inch by 1-3/8 of an inch and it is 3-1/2 inches long. That is with no rubber block installed. With the thickest block installed it will measure 2-5/8 inches wide and with the rubber grommet installed the length will be 3-5/8 inches long.
So as long as the measurement of the stake pocket is within those bounds you will be good! view full answer...
Trailer tail lights usually have 2 different circuits routed to them; stop/turn and then the running (tail) lights. Since your turn light functions are working but the tail lights aren't that just means you need to troubleshoot that specific circuit.
Problems with a lighting circuit can be located on the tow vehicle or the trailer so you can determine which end to troubleshoot by testing the running (tail) light circuit on your vehicle trailer wiring connector with a circuit tester like... view full answer...
The Dexstar Conventional Steel Wheel part # AM20766 is a 6" wide wheel which has a positive offset of .5" therefore, the backspacing is 4". view full answer...