Yes, since you already have a 6-way trailer connector installed that has some of its connection made, just those for basic trailer lighting, you need only to make the two additional connections for the output circuit from a trailer brake controller and for the 12V trailer auxiliary power circuit.
On a brake controller like the Prodigy P3 # 90195 the blue output wire will need to be routed to the 6-way, to either the center pin or the pin at the 10:00 position. This depends on how your... view full answer...
A 1995 Freightliner will not have a brake controller port. In order to install one you will need to add a 7-way, and to do this you'll need the following:
- Tail Light Converter with 4-Pole Flat Trailer Connector # C59236
- Universal Installation Kit for Trailer Brake Controller # ETBC7
You will first install the 4-flat, which will activate your trailer's lighting functions, and you'll then plug that into the 7-way that comes with the # ETBC7, which also gives you the wiring, circuit... view full answer...
Go To Results