The wiring adapter to install the Tekonsha BRAKE-EVN brake controller, part # TK63VR, into your 2000 Ford Excursion is part # 3035-P. Since you have the factory 7-way trailer connector there should be a connector under the dashboard to plug in the adapter. view full answer...
The Westin Molded, Lighted Running Boards - 6" Wide - Black # 27-0025 you mentioned come in kit # 27-0025-1215 which fits yours 2001 Ford Excursion. If you only need the custom installation kit for your vehicle then you can find that here Custom Installation Kit # 27-1215. view full answer...
Sounds like your 2000 Ford Excursion has a factory 7-way installed on it currently. All you would need to replace it would be the part # 74682 which is a 7-way connector that also comes with a 4-way. view full answer...
The OBD-II diagnostic port on a vehicle cannot provide a trailer brake controller connection but certain vehicles with factory-installed 7-way trailer wiring will also include another under-dash port to allow simple plug-in installation of a trailer brake controller like the popular and reliable Prodigy P3 # 90195.
If your 2003 Ford Excursion has a factory 7-way trailer connector then it will also have this port. The connector you're looking for will mate with the larger plug on part #... view full answer...
The parts that you are needing are the Replacement Spring Bars for Blue Ox SwayPro Weight Distribution System # BXW4007 for the spring bars and the Clamp-On Lift Brackets for Blue Ox SwayPro Weight Distribution Systems # BXW4010 for the rotating latches.
When we have spoken to the manufacturer regarding the older style of head, they have said that the spring bars are compatible with the old style head. view full answer...
Yes, the Dutton-Lainson Wiring Harness # DL24151 will work with your SuperWinch Winch 2 Go but as you pointed out in your second question it isn't the best solution for you.
A better harness is the Bulldog Wiring Kit # BDW20207 that has a ground and power cable that are both 24 feet long. view full answer...
When you purchase the etrailer Trailer Coupler Latch Lock - 7/8" Span - 1/4" Diameter - Stainless Steel item # e98890 you will select the number of locks you want that are going to be keyed alike. You can do this with different size etrailer locks too. Like the etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel item # e98882. You will just need to make sure you check them all out at the same time.
If you already own multiple locks there is no way... view full answer...
I recommend using the 7-way trailer connector # HM40975 on your 2002 Ford Excursion if you have the round factory connector it plugs into. It will be where the wires you have shown in your picture plug into the vehicle's factory wiring.
If you don't have that connector, then instead use the Hopkins # HM48470 directly onto the loose wires you have. I've attached a diagram that shows the back of a 7-way and which circuit needs to go to which location. You'll want to test each wire you... view full answer...
To install the Tekonsha Primus IQ Trailer Brake Controller # TK90160 on your 2002 Ford Excursion you'll need the wiring adapter # 3035-P as it has a different connector system than what you had on your 2002 GMC Sierra. If your Excursion has the factory 7-Way connector then you won't need anything else but if you have the factory 4-Way or no connector at the back then you will need some additional parts which you can find below:
Factory 4-Way
Adapter - # 3035-P
Wiring Adapter - # 37185
May... view full answer...
For your 2002 Ford Excursion I recommend going with Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle # AL57132 for the rear. If you happen to have a snow plow or some other heavy item on the front, then you can also get the front setup as well Air Lift LoadLifter 5000 Air Helper Springs - Front Axle # AL57154. You likely will only need the rear kit if you are just trying to reduce rear-end sag and improve handling when weight is added to the back.
If you have a true 6" lift, then... view full answer...
Go To Results