The Rhino-Rack Vortex Aero Crossbars # RRVA118B-2 are just the crossbars themselves. You will also need the Rhino-Rack SX Series Legs # RRSX100 to attach the crossbars to the raised rails of your your 2019 Subaru Crosstrek. view full answer...
You will need the Replacement Hardware Kit for Trailer Hitches # RHK.
Just follow this link and you will type in your hitch number, C13382.
Next use the pull down tab to select the manufacturer, Curt.
Then you are good to go. view full answer...
If you're looking for a hitch that will install mostly hidden, you're looking for the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - Class III - 2" # 306-X7365, which installs behind the bumper and has a removable receiver so that you won't even notice it's there when it's not in use. This hitch has a 2" hitch receiver that's perfect for carrying bike racks, and is a confirmed fit on your 2019 Subaru Crosstrek Hybrid.
If you don't already have a bike rack, the Swagman XTC2 Bike... view full answer...
I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # C56243 as an option that works for the hybrid of the Subaru Crosstrek. The below installation video is a great help when you're ready to get started.
If you don't already have a hitch, the etrailer Trailer Hitch Receiver Class III - 2" Item # E98838 is confirmed to fit and is available in a matte black finish for a nice, less obvious look. view full answer...
I have a great 7-way solution for you. While we do not carry a customized 7-way that installs on your 2020 Subaru Crosstrek without splicing, we do have a universal installation method that will work great for you. That is the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7. This kit does require splicing into your current wiring.
It is important to note that when using this kit, you do need to have a 4-way harness already installed. If you need... view full answer...
Yes, we do carry both the Replacement Mounting Bracket for Yakima SlimShady Roll-Out Awning # 8880736, and the Replacement Clamp Assembly for Yakima SlimShady Roll-Out Awning # 8880737 that you're inquiring about.
These are both replacements for the Yakima SlimShady Awning # Y07409, however this awning has been discontinued per the manufacturer. view full answer...
The Replacement Lower Rubber Cover Strip for Thule WingBar Evo Crossbars # TH79VW is the correct part you would need for your Thule roof rack on your 2019 Subaru Crosstrek.
It wouldn't hurt to replace all 4 strips so you know they're all new and replaced but 3 would work just as fine. This rubber trim will work on all Thule WingBar Evo crossbars.
You will not have to trim it.
I attached a review video link below. view full answer...
While we aren't certain at the moment when the LockRack Loading Bar will become available, I do have another solution for you that you may be interested in.
I recommend checking out the Rhino-Rack Universal Load Assist - Crossbar Mount # RR-RUSL.
Similar to the Loading Bars, these are a universal load assist system that will allow you to load one canoe, kayak surfboard or ladder easily with one person.
This load assist system has a weight capacity of 132-lbs, and measures 87-1/8" extended,... view full answer...
To flat tow your 2021 Subaru Crosstrek with manual transmission, you will need at least 5 main parts. Those parts are a base plate kit, tow bar, safety cables, tow bar wiring and a supplemental braking system. I have listed these parts below, in an option that is compatible with your Crosstrek.
Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-52927-5
Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522
Safety Cables: RoadMaster 68" Single Hook, Coiled Safety... view full answer...
Even though The Curt Trailer Hitch Receiver # C13382 is not confirmed to fit your 2023 Subaru Crosstrek Non Hybrid we do have another option for you. The Draw-Tite Trailer Hitch Receiver # 36644 is confirmed to fit. No drilling is required for installing the Draw-Tite hitch onto your vehicle, so you will not have to enlarge the mounting holes.
The Draw-Tite hitch has a maximum gross trailer weight up to 3,500 pounds and has a maximum tongue weight up to 350 pounds. I would recommend checking... view full answer...
It really depends on what roof top tent you are looking at. If you are looking into the Yakima SkyRise HD Tent # Y07436 then you will need to have raised rails and use the roof rack that consists of the Jetstream Bars # Y00426 , along with the TimberLine Towers # Y33TR. If you would like to add lock cores to your roof rack you can use part # Y07204.
I have attached a clip from the product page where you can see some of the stipulations about fit. The roof rack must be rated for 165 lbs... view full answer...
Though Roadmaster has not yet come out with a baseplate setup for your 2023 Subaru Crosstrek we do have another available option for you.
The Blue Ox Base Plate Kit # BX3622 is confirmed to fit a 2023 Subaru Crosstrek with a manual transmission. It has a hidden design that provides a clean, seamless look. It has a durable steel construction and is powder coated to help resist rust and corrosion.
You can use you Roadmaster Falcon towbar with the Blue Ox baseplate when using The Adapter... view full answer...
To install the Redarc Tow-Pro Liberty Brake Controller # RED52VR on your 2024 Subaru Crosstrek you are going to need our 7-Way Kit # ETBC7. This will connect to a 4-Way # C56040 if you do not already have one. If that is the case you will also likely need our etrailer Trailer Hitch Receiver # e98912. view full answer...
The owner's manuals I'm able to find online for a 2016 and 2017 Subaru Crosstrek don't mention flat towing at all. Your best bet is to check with Subaru to find out if it can be flat towed, and what steps are necessary to do so. From what I have found both model years can be flat towed since you have a manual transmission but I still recommend verifying with Subaru. Also, both models use the same parts to be flat towed so what I recommend works with either the 2016 or the 2017.
For... view full answer...
To get your 2018 Subaru Crosstrek set up for flat towing I recommend the Roadmaster Direct-Connect Base Plate Kit # RM-52927-5 because I think it has a slightly easier installation than some others. Then the etrailer SD Non-Binding Tow Bar # e74ZR paired with the Replacement Base Pins # RM-910029 to attach to the base plate. The etrailer tow bar will come with the needed safety chains. I prefer the installed braking systems because you wont have to mess with moving the system in and out... view full answer...
After installing The Draw-Tite Trailer Hitch Receiver # 36644 onto your 2019 Subaru Crosstrek, the hitch has a tongue weight of 350 pounds. You're only as strong as your weakest component, so you would need to check your vehicle's manual to find the proper tongue weight recommendation for your vehicle.
To make your 1-1/4 inch hitch to a 2 inch hitch The Hitch Adapter # HTAD is needed. Using this adapter will cut the tongue weight in half so 350 pounds of tongue weight turns into 175 pounds... view full answer...
With a 4 way flat already installed on your 2020 Subaru Crosstrek, you're well on your way and installing a 7 way is relatively easy. Since you're wanting to use the Curt Echo # C51180, I recommend using the # ETBC7L, which doesn't require a connection to a brake controller wire inside the vehicle's cabin.
To complete the install you'll need to run a 12 gauge wire, which is included (along with a circuit breaker), from the rear of the vehicle up to the battery; you'll want to run this... view full answer...
The bolts that are used to install the EcoHitch Stealth Trailer Hitch Receiver # 306-X7365 on your 2018 Subaru Crosstrek are 1/2”-13 x 2” size grade 8 hex bolts.
Please note that new hardware must be used each time a trailer hitch is installed as they are only made to be torqued once. Since you have a newer vehicle it is unlikely that you are transferring this trailer hitch but this is always good to note.
If you let me know what you will be using the trailer hitch for I can make additional... view full answer...
No problem!
For your 2023 Subaru Crosstrek, with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467 I recommend using the:
-No-Drill Mount for Electrical Mounting Bracket - Short # 18140.
This is a universal mounting bracket that will work with your Tekonsha 4-flat connector, and will zip tie around your hitch to also provide a no-drill installation. view full answer...
For your application I recommend the LED Light Strip Kit with Wireless IR Remote # DG52694 as well as the Add-On LED Light Strip # DG52697 (which I confirmed will work together according to my contact at Diamond Group).
Each of these kits comes with 33' of light strip so you'll have right at the 66' length you're looking for, plus these have a rubber-type construction so they are flexible enough to accommodate the 90 degree angle you are needing to use. The light strips have 16 different... view full answer...
Go To Results