The Westin Fey Diamondstep Rear Bumper part # 63000 should fit a 1986 Jeep Comanche using the Custom Installation Kit for Westin Diamondstep Bumpers part # 97900. I checked with Westin and they only show the custom brackets for a 1987+ but I was not able to find any difference between the 1986 and 1987 model year. view full answer...
Your 1986 Jeep Comanche is not a confirmed fit for the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Black Powder Coated Steel # 63000-97900 most likely due to the frame width. This bumper requires a 45" vehicle frame width for the brackets to attach to. If you do have a 45" frame width you could possibly install this bumper on your Comanche. There is not another bracket kit confirmed to fit your vehicle.
I've attached the installation instructions below to give you... view full answer...
Westin doesn't have record of which install kit the 1986 Commanche would use, but in my research I couldn't find any differences between the 1986 and 1987 models. Westin Recommends the universal bumper mount kit for the 1987 models, part # 97900 so I see no reason why it wouldn't work on your truck. Because Westin doesn't officially list it as a fit, I couldn't guarantee fit. view full answer...
The Custom Installation Kit for Westin Diamondstep and Surestep Bumpers # 92240 is desgined for 1994 to 2002 Dodge Ram 1500, 2500, and 3500 trucks, so it would not fit your 1988 Jeep Comanche.
For your 1988 Jeep Comanche you would want to use the Custom Installation Kit for Westin Diamondstep Bumpers # 97900 which fits 1987 to 1992 Jeep Comanche vehicles. This will allow you to mount a Westin DiamondStep or SureStep bumper onto your Jeep. view full answer...
You basically just need to go with the Redarc Smart Start Battery isolator that has at least the amount of amperage required that your alternator puts out so for a 90 amp alternator you'd want the part # 331-SBI12D. view full answer...
The Demco Classic Base Plate Kit # DM9518010 you mention will actually not work with the Blue Ox Alpha 2 Non-Binding Tow Bar - Motorhome Mount # BX7380, instead, you'd want to use the Blue Ox Base Plate Kit # BX1110.
As far as towing the vehicle, you'll want to consult your owner's manual to be sure but unless it says specifically not to then you'd have no problem flat towing your vehicle.
Also, if you're interested in completing your flat towing setup you're going to need:
-A braking... view full answer...
We carry two rear bumpers for the 1991 Jeep Comanche, part # 73000-97900 which is chrome plated and part # 63000-97900 which is black powder coated like you're looking for.
Both bumpers are rated for 3,500 pounds and have a 3/4 inch hole for a hitch ball like part # C40018. They both also include all of the installation hardware. view full answer...
Hey Stephen. In addition to the Westin Fey Diamondstep Rear Bumper, you will also need the Custom Installation Kit # 97900. This kit will contain all of the brackets and hardware needed to install the bumper.
For a 1989 Jeep Comanche, the correct Westin Diamondstep bumper will be as follows:
- Westin Fey Diamondstep Rear Bumper - Black Powder Coated Steel # 63000 view full answer...
We don't have any fit info for trailer wiring for your 1989 Jeep Comanche, but a universal trailer wiring harness like part # 119178KIT would work well since this is also the same harness recommended for the 1989 Jeep Cherokee which is what the Comanche is based off of. view full answer...
Go To Results