Expert Answers about Chevrolet Camaro

• Correct Ball Mount and Hitch Ball for Use with Curt Hitch # C11222 on 2014 Camaro Convertible
• The Curt Class I trailer hitch you referenced, part # C11222, is a correct fit for your 2014 Camaro Convertible without the ground effects package. The recommended ball mount for use with this light-duty hitch is part # C45520 from Curt, and this ball mount has a rise of 3-1/8-inches. It can only be used in the rise position. With this ball mount you can use either 1-7/8-inch ball # C40001 or 2-inch ball # C40018. Your trailer coupler will be labeled or stamped with the size ball that...
  view full answer...


• Which Hitch Extender Needed to Use Bike Rack in Hitch Installed on 2012 Chevy Camaro
• We have two extenders available that are compatible with a 1-1/4 inch receiver. The # HES6 is 6 inches long and the # HES0 is 10 inches. To determine which you need, you'll need to measure the distance between the hitch pin hole in the shank of your bike rack to the closest portion of the rack upright. The length of the shank added to the length of the extender would need to be longer than 12 inches, so the bike rack clears the bumper. However, using the extender will lower the tongue...
  view full answer...


• Header Connections Needed to Install a MagnaFlow Exhaust System on a 1968 Chevrolet Camaro
• As you have most likely realized, there will be some welding involved for the installation of the MagnaFlow Exhaust System, # MF15895, on your 1968 Chevrolet Camaro. You will need to find a flange that is compatible with your headers and have it welded to the front pipes that are included in the install kit, after they have been cut to the proper length. If your headers do not have a flange and you need to create one, you could use a ball flange. We have 3 sizes of stainless steel ball...
  view full answer...


• Recommended Trailer Hitch For A 2014 Chevrolet Camaro
• When it comes to installing a trailer hitch on your 2014 Chevrolet Camaro it depends on what style of Camaro that you have. If you have a Coupe without Ground Effects Package then The Draw-Tite Sportframe Trailer Hitch Receiver # 24850 will work for you. If you have a Convertible without Ground Effects Package then The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 inch # C11222 will work for you. Both hitches are a class 1 hitch. They both have a bolt on installation with...
  view full answer...