Expert Answers about Kia Cadenza

• Trailer Hitch Receiver Compatibility with Leased 2017 Kia Cabenza
• The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36544 is a confirmed fit for your 2017 Kia Cadenza. I've attached the installation details so you can see how this hitch attaches. Most leased vehicles won't have any issue with adding a hitch, but you will need to look at your specific lease restrictions. There is not any fascia trimming required in the installation instructions, so you'd probably be okay. Adding a trailer hitch to a vehicle will not void any manufacturer...
  view full answer...


• Exhaust Sways Into Trunk Pan After Installing Curt Trailer Hitch on a 2018 Kia Cadenza
• Glad to hear that you had an easy time installing the Curt Trailer Hitch # C12118 on your 2018 Kia Cadenza! You should be able to move your exhaust hanger around a little so that it doesn't sit as close to your trunk pan. If you check out the linked article you can see some other ideas about relocating your exhaust hangers. Let me know if this solution doesn't work out and I can make some additional recommendations.
  view full answer...


• Yakima Roof Rack Parts for a 2015 Kia Cadenza
• The Yakima parts needed to install a roof rack on your 2015 Kia Cadenza are the following: - 50" JetStream Crossbars # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y27FR and # Y06126 - Lock Core Kit # Y07204 The "Y27FR" is our number for the BaseClip 197 you referenced.
  view full answer...


• Installation of Curt Wiring Harness # 56199 12 Volt Power Wire To Battery Terminal
• The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56199 does state to use the cme-pcl-ins as you stated. I reached out to my contact at Curt and have attached it. The instructions are pretty vague, so I have also linked an article to further assist in routing that power wire to the positive terminal of your battery.
  view full answer...


• Trailer Hitch Receiver for 2014 Kia Cadenza Carrying Scooter
• It sounds like you're looking for a trailer hitch for your scooter carrier. For your 2014 Kia Cadenza we have the Curt Trailer Hitch Receiver # C12118. This has a 1-1/4" receiver and a bolt-on installation. It has a max tongue weight of 350 lbs but you will need to check your owner's manual for the max vehicle tongue weight. You will be limited by whichever is lower. It is also likely you will need an adapter like the # HTAD you looked at since most carriers like the # FHG67ZR will be...
  view full answer...


• Recommended Trailer Hitch Receiver And Wiring For 2014 Kia Cadenza
• For your 2014 Kia Cadenza, the Curt Trailer Hitch Receiver Class II - 1-1/4", # C12118 is a confirmed fit. The hitch will come with all the installation hardware you need as well as installation instructions. For any non-trailer load like a cargo carrier or a bike rack, you will also need the Curt Trailer Hitch Support Strap, # 18050. If you plan to do any towing with this vehicle, I recommend using the Curt Class II Drawbar - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs, # C45520. You will...
  view full answer...


• Trailer Hitch or Roof Mount Cargo Carrier for a 2014 Kia Cadenza
• The Yakima EXO Swing Away Enclosed Cargo Carrier - 2" Hitches - 10 cu ft - 100 lbs # Y62VR is a great carrier, but it will not work for your 2014 Kia Cadenza. The only hitch available for your Kia is the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12118. This hitch will only work with accessories for 1-1/4" receivers. The Yakima EXO requires a 2" hitch. If you install the Curt hitch # C12118 on your Kia, you could use a cargo carrier like the 20x47 Reese Cargo Carrier...
  view full answer...


• Trailer Hitch Receiver for Towing With a 2015 Kia Cadenza
• I recommend the Curt Trailer Hitch Receiver # C12118 on your 2015 Kia Cadenza. This hitch has a tongue weight rating of 350lbs and 3,500lb trailer rating. You will want to ensure that you do not exceed the weight ratings given by the manufacturer for your vehicle. This will not require you to change your rear shocks. If your suspension is sagging you should check that the weight on the trailer is distributed properly across the trailer and you do not have to much tongue weight. You typically...
  view full answer...


• Recommended Bike Rack for Recumbent E-Bike
• The Swagman XC-Extended Platform-Style 2 Recumbent Bike Rack part # S64650-EXT will not meet either the wheel base or weight requirements of your of your bike. It is limited to 35 pounds per bike and a maximum wheelbase of 69 inches. Unfortunately, there are no bike racks for a 1-1/4" hitch that will work with a 70" wheelbase and 57 lbs. Instead, I recommend a small trailer like the Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs Item # K2MMT5X7. The bed of...
  view full answer...