Expert Answers about Subaru BRZ

• Installation instructions for the Rhino-Rack Roof Rack on the 2016 Subaru BRZ
• The instructions for the mounting kit # RRRDM01 for the Rhino-Rack Roof Rack are meant to generic instructions to fit multiple vehicles. There are no specific installation instructions for your 2016 Subaru BRZ. The instruction for this mount kit are attached to this page for you to review. I have an alternate solution to using a roof rack for you. I recommend installing a hitch to use a bike hitch and ski and snowboard adapter on your Subaru. I like the Curt hitch for your vehicle, #...
  view full answer...


• Will Bumper Need to be Modified on the Draw-Tite Trailer Hitch Receiver for a 2017 Subaru BRZ
• The design of the Draw-Tite Trailer Hitch Receiver, # 24935, will allow to install the hitch without cutting or modifying the bumper or body in anyway. The attached instructions will explain the installation procedures for this hitch. As for the suspension or brake upgrades, unless the suspension dropped the OEM ground clearance, you will have no issues with this hitch. If the ground clearance has dropped then there may be an issues with the hitch receiver dragging when entering driveways...
  view full answer...


• How To Release Tension On Strap For Erickson Multiplier Ratchet Tie-Down
• The operation of the Erickson Tie-Downs with the Multiplier Ratchet like part # EM58511. I have attached a video that shows how the tie-down is used to tighten and also release the tension. You can check out the attached photo of the Multiplier Ratchet with some of the features pointed out. The release lever is pulled up to disengage the ratcheting handle. As the video shows, to lock it in position after tightening you would pull the release lever and move the handle down until it is...
  view full answer...


• Installation of Draw-Tite 24935 on 2020 Subaru BRZ
• To install the Draw-Tite # 24935 on a 2020 Subaru BRZ, the rear bumper cover and bumper beam must indeed be temporarily removed so the hitch can be sandwiched between the beam and the structure of the chassis. The print I provided from the linked installation instructions should give you an idea of how the hitch fits on the vehicle.
  view full answer...