The Roadmaster Falcon 2 part # RM-520 is a very popular tow bar and most likely what you had. I'd recommend you go with the Falcon All Terrain # RM-522 instead though as this will be easier to connect/disconnect due to the non-binding arms that will release tension from binding. view full answer...
We contacted our supplier a while back about the new 2011 Chevrolet/GMC hitches and they built a new locking hitch pin specifically for these new applications.
You will need the Trailer Hitch Receiver Lock - Extra Long - Flush Design for 2-1/2 inch Trailer Hitches, item # e98881, for your new 2011 GMC Sierra 2500hd with 2-1/2 inch hitch. view full answer...
The tongue weight capacity of the Ball Mount Adapter for Convert-A-Ball Cushioned Weight Distribution Shank, item # BA-1, is 2,000 lbs.
The gross trailer weight capacity of the Ball Mount Adapter is 5,000 lbs, and when used with the Convert-A-Ball Cushioned Weight Distribution Shank, item # AMAC1, you will need to stay within the weight capacity of the ball mount adapter which is 5,000 pounds. view full answer...
After installing the T-One Connector w/Upgraded Circuit Protected ModuLite, # 118491, on your 2011 Honda Pilot, I recommend attaching No-Drill Mount Bracket, Short, # 18140, with Mounting Bracket 4-Pole Flat, # 18144. This will give you the clean, professional appearance you are looking for.
If a longer bracket is needed, you can use No-Drill Mount Bracket, Long, # C57202, with Mounting Bracket 4-Pole Flat, # 18144. I have included a link a video install of the wiring harness for reference. view full answer...
For an economical roof rack for your 2009 Chevy Aveo Hatchback you would want the Rhino Rack roof rack that consists of part numbers # RRVA118B-2, # RRRLKVA, and # DK180 that you referenced.
Your Thule Stacker part # TH830 would fit and work well on this rack. view full answer...
For a 2008 Chevy Aveo hatchback you would need to look at hitches for the Aveo5. None of the hitches for the sedan will fit, including # C11331, but there are 2 hitches that do fit:
Curt # C11306
Draw-Tite # 24741
If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch.
If you go with the Curt... view full answer...
For your 2009 Chevy Aveo5 we have the Curt hitch part # C11306 as a confirmed fit. It is perfectly legal to install this hitch on your vehicle. You would want to check your owners manuals for any restrictions on towing and be sure to follow them.
For trailer wiring you'd then want the part # C59236. For a ball mount part # C45521 and for a hitch ball # A-80. view full answer...
The base plate kit from Demco part # DM9518237 is one component that is needed to flat tow your 2010 Chevy Aveo5 but you will need a few more things as well. You'll need a tow bar like the Blue Ox Adventurer Tow Bar part # BX7322 and then safety cables # RM-643.
For wiring then we have the Roadmaster diode kit part # RM-15267 which will install without requiring you to drill into the taillight housings of your vehicle. It ties into the wiring of your vehicle lights to give you the ability... view full answer...
The hanging style of Thule OutWay part # TH45JV is a confirmed fit for your 2007 Chevy Aveo5, but the platform style is not. I don't like to recommend the hanging style OutWay, # TH65JV, the early versions of the rack were denting the bumper of the vehicles due to the way it carried the weight of the bikes so I have been reluctant to recommend it for vehicles where it's even listed as a fit. The # TH45JV is an excellent bike rack that will work well for you.
If you plan on carrying any... view full answer...
To install Curt Trailer hitch, # 11306, on a 2009 Chevy Aveo5, you will not need to remove the tow hook that is permanently attached to the vehicle. The hitch needs the tow hook as one of the mounting points. You will place a carriage bolt and rectangular spacer through the top of the tow hook loop and secure it with the nut. In the instructions, linked for reference, there is a picture that shows the tow hook detached from the vehicle, but this is just for clarity. The tow hook is not... view full answer...
I do have an option for you to use your Karrite Cargo Box but it does not entail placing the cargo box directly on the roof. Since Karrite has been discontinued, the straps needed to hold them onto a roof are no longer available which means the only option is to place it onto a set of crossbars like the SportRack Semi-Custom Roof Rack part # SR1002 which is a fit for your 2009 Chevrolet Aveo5. In order to secure the cargo box you would then need to install the Replacement Mounting Hardware... view full answer...
The part # KH11405 is a fit for your 2009 Chevy Aveo5 and installs in the frost plug around the back side of the engine on the passenger side. I wish we had pictures or a video but that's as specific of info as we have available from Kat's. view full answer...
With the installation of a new Curt wiring harness I doubt there are any issues with the converter, and it should have more than enough power unless you have an unusual number of lights on your trailer.
I would check out the ground connection, which is likely the issue. I'm guessing you used the same ground connection when you installed the new wiring harness. Make sure it is secure on a clean, bare-metal surface. It might be best to go ahead and relocate the ground just to be sure.
If... view full answer...
The SportRack Roof Rack for Naked Roofs part # SR1002, which you reference, is a confirmed fit for your 2007 Chevy Aveo5. This semi-custom fit is adjustable with crossbars that are 50" long. As long as your naked roof measures 50" or less side to side this rack will work for you. You will want to measure from the door jamb to door jamb. I have attached a link to the installation details for you to check out.
A smaller roof may mean a more expensive basic roof rack kit because smaller roofs... view full answer...
We do show many roof rack options confirmed to fit your 2010 Chevrolet Aveo5 5-door hatchback with a naked roof (meaning no rails or bars on the roof at all). We do have fixed point racks fit for your car. If it had a fixed-point attachment you would be able to find those attachment points along the roof's sides.
The linked page will let you see all roof rack options, which include offerings from many brands and in several bar styles, including basic round and square options as well as... view full answer...
According to the instructions for the Draw-Tite Trailer Hitch, # 24741, you will not have to remove the bumper cover, cut it, or drill any exposed part of the vehicle. I have included a link to the instructions below.
There is a process involving fish wire that some are not familiar with. I have included a link to Trailer Hitch Installation Tips that has a section on this process. There is also a link to a video that I have added below. view full answer...
Go To Results