Expert Answers about Chevrolet Avalanche
- Trailer Wheel and Tire Recommendation with 81 mph Speed Rating for Trailer Weighs 3,300 lbs
- I wish we had exactly what you are looking for, but the only Load Range we have in the tires size ST175/80R13 that has the higher speed rating is Load Range C like part # TTWTRTM1758013C that you referenced.
You would have to go with a # AM10210 to get a Load Range D with enough capacity unless you wanted to upgrade your wheels as well.
The tire part # AM10235 is a 205/75-14 with a 2,200-lb max load at 75 psi capacity that has an 81 mph speed rating. The tire will be about 2 inches taller...
view full answer... - Tailgate Assist for Lifting and Lowering Tailgate of 2004 Chevy Avalanche
- The Hopkins EasyLift Truck Bed Tailgate Lift Assist # 74211 may be compatible according to my contact at Hopkins. It hasn't been tested on your vehicle that is why a fit or a lack of fit cannot be confirmed. We have had customers with Avalanche models as close to yours as 2004 say it fits perfectly.
view full answer... - Front Hitch Available for a 2005 Chevy Avalanche 1500 LTZ
- We do offer a front mount hitch for the 2005 Chevy Avalanche 1500. Curt confirms that their # 31302 front mounted receiver is a fit for the 2005 Avalanche 1500. I've linked an install video and the instructions for you to look over to see if it's something you'd feel comfortable tackling yourself. Curt tells me that a trained professional installer should be able to complete the install in about an hour, and it would take a typical do-it-yourselfer about twice that.
view full answer... - Availability Of Roof Rack That Utilizes Factory Holes On 2011 Chevy Avalanche
- I confirmed that there are not any roof racks that will be able to utilize your factory drilled holes that the OEM roof rack attached to on your 2011 Chevy Avalanche. If you are able to keep the factory rails then you can install Yakima JetStream Crossbars - Aluminum - Silver - 60" # Y00426 along with TimberLine Towers # Y33TR. These bars have the standard T-slot channel on top which allows for channel-mounted accessories to be easily installed or removed. I attached a demonstration video...
view full answer... - Brake Controller Recommendation and Install for 2004 Chevy Avalanche 1500
- Your 2004 Chevy Avalanche that has a factory 7-way at the rear of the vehicle is factory pre-wired for a brake controller but you will need a quick-install connector part # 3015-P to connect to the port of the junction box under the dash of your truck.
For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses...
view full answer... - Availability of an Engine Oil Cooler Kit That is Compatible on a 2005 Chevrolet Avalanche 5.3L
- The Derale Atomic-Cool Engine Oil Cooler Kit, # D15450, will fit the 5.3L engine in your 2005 Chevrolet Avalanche. The kit includes multiple sleeve nuts to fit the engine oil filter mount to mount the sandwich adapter in the kit.
However, installing the cooler and fan could be an issue that might give you the most trouble. The cooler will mount anywhere on your truck, but you will have to find the best location that will allow you enough room and hose length to install the cooler.
The...
view full answer... - Availability Of a Plug and Play Connector For Tekonsha Prodigy P3 On a 2006 Chevy Avalanche 1500
- The harness your 2006 Chevrolet Avalanche 1500 came with is designed to wire into the Pigtail # 20127 which is included with the Tekonsha Prodigy P3 # 90195. We do have the Adapter # 3015-P which will allow you to plug and play into the factory connector behind your dash if you prefer to not have to splice the wiring yourself.
view full answer... - Vehicle Side Trailer Connector with a 7-Way Blade Style and 5-Way Flat Style Connector Built In
- We have the Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector, # HM48470, which has 7-Way, 4-Way, and 5-Way connectors. I have included a link to the installation details below. The factory 7-Way will have to be removed and the new connector would be hardwired in. You can use the wiring FAQ article, linked below, to attach the wiring to the correct terminals on the connector.
view full answer... - Need Replacement Side Arms for Roadmaster Base Plate Kit # 3154-3 on 2007 Chevrolet Avalanche
- To replace the side arms for your Roadmaster Base Plate Kit, # 3154-3, you are going to need to order Roadmaster Replacement Arms # RM-ARMS. A bracket arm order form, which is included in the Installation Details link, will need to be filled out. Once you have all of the information needed for the form, it may be easier to give our customer service reps a call at 1-800-298-8924 to place this order. They would be happy to assist in completing your order and getting all of the information...
view full answer...
Go To Results