Yes, the Bauer Products Padlock, # BA46VR, can be keyed alike with the 300, 700, and 900 series locks. However, all locks must be purchased at the same time and select the keyed alike option at time of check out.
Please take a look at the product review video I have attached. Happy Camping! view full answer...
The factory puck system that was available for your 2019 Ram 2500 is integrated into the frame and cannot be installed as an aftermarket part. The only underbed kit available for your Ram is the B&W Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches, # BWGNRK1320-5W. This lets you install the B&W Companion 5th wheel trailer hitch # BWRVK3500 or # BWRVK3400.
The Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BWGNRK1320-5W is better... view full answer...
Your 2014 Ram 2500 Outdoorsman pickup could be fitted with either a 2-inch hitch or a 2-1/2-inch hitch. For a 2-inch Equal-i-zer shank use part # EQ90-02-4400 which offers 9-inches of drop. For a 2-1/2-inch hitch shank you can use part # EQ90-02-4900 but note this has 6-inches of drop only. view full answer...
For your 2022 Ram 2500 Short Bed with the factory prep/puck system B&W offers the Companion OEM 5th Wheel Trailer Hitch w/ Slider # BWRVK3670. The hitch is rated for 20,000lbs and offers 12" of travel to allow for jackknife turns when maneuvering the 5th wheel trailer.
The B&W Companion OEM 5th Wheel Hitch # BWRVK3600 that you found is a fixed hitch designed for long bed trucks and can be used if your trailer has a rotating pin box. Currently B&W only offers this hitch in a 25,000lb hitch.
Be... view full answer...
Westin Automotive does indeed offer a stainless steel wheel to wheel nerf bar kit for your Crew Cab short bed 2020 Ram 2500.
I'd recommend the 5 inch oval PRO TRAXX polished stainless nerf bars # 21-534320. view full answer...
We do have the deflectors for your 2022 Ram 2500 Crew Cab. The correct deflectors are the WeatherTech Side Window Rain Guards with Dark Tinting - Front and Rear - 4 Piece # WT82503. These will help reduce wind noise and help keep temperatures down by promoting better air circulation.
I have attached an installation video for your reference. view full answer...
We do indeed have front mounted receivers that are compatible with the 2015 Ram 3500 Tradesman model. If your Ram has the front mounted tow hooks that protrude through the bumper (see photo), you can use the Draw-Tite Front Receiver, part # 65063.
If your truck isn't equipped with the tow hooks, you'd need to use the Curt # C31015 which mounts to the frame members rather than the tow hooks.
If you click the provided link, you can see a video showing the Draw-Tite model being installed... view full answer...
The SumoSprings Rebel Custom Helper Springs # SS27GR are confirmed to fit your 2021 Ram 2500. These springs are rated for 5,000lbs capacity at 50% compression. The 2 piece design coupled with the progressive design will help you with the sag and sway you are experiencing and will not give you an overly harsh ride if you take your Lance camper out. view full answer...
43 inch long Reese fifth wheel rails are their standard 10 bolt rails. That means all you need for a bracket kit is the part # RP50054 to attach them to your 2017 Ram. You will need new hardware to go with the bracket kit to attach to the rails. For that you would need part # RP58504. view full answer...
For just the rails of the B and W gooseneck hitch that fits your 2012 Ram 2500 part # BWGNRK1313 you would want the part # BWGNRM1313 which comes with everything except the center section.
If you have a different hitch or need different hardware let me know. view full answer...
I wouldn't recommend the Bestop EZ Fold Folding Tonneau Cover # B1624001 as an ideal cover for fifth wheel towing as when it's folded up it adds quite a bit of height to the bed rails which will cause clearance interference with the trailer overhang.
A retractable cover like the part # 311-SMD7833 would be ideal but a roll up like part # 834532001767 would also work. view full answer...
We offer several 1/2-inch stainless-steel lug nuts with the common 60-degree cone profile that you can see on the linked page. Part # AM90070 measures 2-3/32-inches long and is closest to your specified length. view full answer...
If you already have the B&W Custom Mounting Brackets # BWRVR2600 and all of the hardware for your 2010 Ram 2500 then the B&W Universal Base Rails you need are part # BWRVR3210. These 2 kits makeup the whole custom kit # BWRVK2600 for your pickup.
Please note that if you have used hardware it will need to be replaced as well since it is only meant to be torqued to specs once.
If you don't already have a 7-Way connector in the bed of your Ram then I also recommend installing the part #... view full answer...
Since you were looking at the # BWRVR2602 I will assume you need brackets for B&W rails. For the 2011 Ram the correct custom mounting brackets are the # BWRVR2600. No drilling is required since they fit the existing holes in the frame. These will work with the B&W Universal Base Rails # BWRVR3210. view full answer...
If you already have the Curt rail kit adapter part # C16022 for your 2017 Ram 2500 you most likely already have a slider hitch too. Which you can use a slider hitch with a Sidewinder pin box, but you have to keep it slid forward at all times.
You will need to remove the pin box of the trailer and replace it with a Sidewinder pin box. Sidewinders are pin box specific so you will first need to know what pin box you have now in order to pick out the correct one.
There should be a sticker... view full answer...
I may have a solution for you, but there is not a silver version of the DeeZee Red Label Truck Bed Tool Box - Low-Profile, Deep, Crossover Style - Alum - 11.7 Cu Ft - Black # DZ8170DLB ; DeeZee has told me that they no longer make this specific box in silver, but there's some options that are very similar.
I recommend looking at the DeeZee Red Label Truck Bed Tool Box - Low-Profile, Crossover Style - Alum - 8 Cu Ft - Silver # DZ8170L or the DeeZee Red Label Truck Bed Tool Box - Deep,... view full answer...
We sure do! The Stromberg Carlson # VGD-10-100 5th wheel steel tailgate fits 2010-2018 Ram 2500 trucks. Per the manufacturer, the tailgate has a 100 lb capacity. You can see an install video by clicking the provided link. view full answer...
Dexter doesn't supply the axle with the Nev-R-Adjust brake assemblies, but you could purchase the Axle, Drums and Brake Assemblies separately to achieve what you're looking for. Here's what you'd need:
-6K Trailer Axle Beam, 89" hub face, 74" spring center spacing # 8327830
-2 ea Dexter Hub/Drum, part # 8-201-9UC3-EZ (or a lower-cost AxleTek version, part # AKHD-655-6-EZ-K), Both hubs include the necessary bearings, races, grease seals, EZ-Lube dust cap and lug nuts.
-Dexter # 23-458-459... view full answer...
The trailer 7-way cables that we currently offer are going to max out at 10awg so you would need to get just the connector, like part # A7WCB, and wire it yourself with 8awg or 6awg. To protect the wires you can use some 1/2" wire loom # 459075-1 and wrap it all with electrical tape. view full answer...
All 5th wheel hitches we have confirmed to fit your 2016 Ram 2500 with 6-1/2-foot bed and with Factory Rail kit (the puck system) are shown on the linked page. None of these is an Andersen product but we do have excellent options from B&W, Demco and others that provide the sliding type hitch you need for proper turning clearance in your short-bed truck.
The advantage of the factory rail/puck system is primarily that it allows you to have a completely clear bed for times when you're not... view full answer...