Expert Answers about Nissan 200SX

• Sidewind A-Frame Trailer Jack With at Least 7 Inch Retracted Height
• For a sidewind A-frame trailer jack with at least 7 inches of retracted height use the Round A-Frame Trailer Jack # TJA-2000S-B. This measures 9-1/4" below the A-frame plate (which is the retracted height), and the only other thing you will need is a foot plate, part # JF-101BK.
  view full answer...


• Compatibility of a Curt Hitch on a 1998 Nissan 200SX
• The Curt Trailer Hitch Receiver # C11261 is a custom-fit Class I hitch with a 1-1/4 inch opening designed to fit the 1998 Nissan 200SX. The Curt hitch is designed to fit up under the bumper and to bolt on to the frame of your vehicle. You will need to know what your vehicle's towing and tongue weight capacities are before installation. The Nissan 200SX has an approximate towing capacity of 1,000 lbs. The max tongue weight for your vehicle will be between 100-150 lbs. The max tongue weight...
  view full answer...


• Troubleshooting Trailer Running Lights Not Functioning
• First thing you should do at this point is test the 4-way of the wiring harness with a circuit tester part # PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached. If the voltage checks out there but the trailer lights still don't function right then the problem is on the trailer wiring. That would mean that problem is either due to a ground issue or a short issue. Make sure that the trailer side connector are clean...
  view full answer...