Hi Jim,
WeatherTech unfortunately doesn't make the TechLiner bed mat for a 2023 Chevy Silverado 6-1/2' bed but does for the 5-3/4' and 8' beds. They have a newer 'ImpactLiner' in the works that they've stated would be a compatible fit but it's about 5-8 weeks out (Feb 2024 for reference) according to their tech department.
If you don't want to wait then I recommend going with the Black Armour Heavy-Duty Custom Truck Bed Mat # BA68AR. Black Armour bed mats are 1/2" thick and built for... view full answer...
The Dometic RV Water Heater # DMC74FR is the only non-tankless option that we currently offer. RV water heaters have dropped in size quite a bit the last few years so you'd likely have to do a bit of framing in order to mount this unit. This system only comes with a 6 gallon tank and requires 120v power so you'd be sacrificing efficiency and might have to run a new outlet if your previous unit used 12v power.
Most manufacturers are transitioning to tankless but I believe you can still... view full answer...
If you have 10" octagonal or concave round jack feet on your Baystar, then the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet # SN76FR will work great.
If not, you're going to have to measure your jack feet and take note of it's shape and let me know what you've got and I'd be happy to help. view full answer...
Hey there Toby, the answer to your question is yes it sure does. Yakima HD crossbars like # Y01156 measure 3" wide x 1-1/2" tall which is within the parameters of the Thule Basin Rooftop Tent # TH32VY.
This tent fits on crossbars that are a maximum of 3-1/4" wide x 1-1/2" tall so it will mount superbly to the Yakima bars.
You made a really nice choice here with the Basin # TH32VY because not only is it a roomy and comfortable tent, but you're also getting a cargo box out of it since it... view full answer...
Hi Ed,
If I'm understanding you correctly your trailer's frame is 3" wide and the coupler needs to have a 2" ball. If so the Demco Channel Tongue Trailer Coupler # DM15000-52 you were looking at would be a compatible fit. I've attached a little diagram below showing the bolt pattern so that you can check if it will match up to the current pattern so you can avoid drilling into the frame.
If you instead have different sizing or need something different then let me know and I'd be happy... view full answer...
Thanks for the pictures but no, the EX2700 tonneau cover that the # EX1700 fits is for a 2004-15 Nissan Titan 6' 7" Bed.
The one previously mentioned # EX1770 is for your truck, so it'd for sure work if you have the 2770 tonneau cover. view full answer...
Hey David, the only base plate brand we offer that can be used with a ReadyBrute Elite tow bar is Blue Ox and it requires the adapter part # BX88297. So for a base plate kit that fits your 2020 Jeep Wrangler Sahara you would want the part # BX1139. Blue Ox base plate kits are my favorite as we have found they are the easiest to use and extremely high quality. I wouldn't say this affects ground clearance any more than a Roadmaster setup. view full answer...
The Sway Control Plate # GY33YR will fit on Glyder # 325-GH-12001, discontinued Rebel and the current Phantom # GY49VR ball mounts. This will allow you to use it with a Sway Control # 83660. The plate is specially designed to fit the notches in the Gen-Y products which are not found with other brands. If you can tell me what ball mount you have I can let you know if there are any kits which will fit your ball mount and allow for a sway bar. view full answer...
Hey Paul thanks for your question. The bike racks that fit 1-1/4" and 2" hitches, such as the RockyMounts MonoRail Solo # RKY10007 do use an adapter which allows it to fit both hitch sizes. I have included pictures below showing the rack with and without the adapter sleeve. view full answer...
The Thru Axle Bike Carrier for Rhino-Rack Pioneer Platforms # RR43233 is not compatible with the T-Track on the Thule Crossbars. The Rhino Rack carrier uses 20mm track nuts and the T-channel on the Thule WingBar crossbars is only 3/4" or 19mm, so the hardware would not fit into the T-track.
If you are needing a bike rack that will work with the T-Track on the Thule Crossbars, we do have options. My recommendation is the Thule ProRide XT # TH598004. This can be clamped to the crossbar... view full answer...
The B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate # BW44FR, and other options like it, don't come with a tab for an anti-sway bar but we do have the Curt Weld-On Sway Control Tab # C45822 which you can use to modify the B&W ball mount to fit your towing application.
B&W didn't add provisions like this so you'll want to make sure to think about how you'll use the ball mount prior to welding this tab on so you get it in the right place the first time. I recommend having... view full answer...
The 8534C8797 is showing as a 15,000BTU unit so the 48008-969 (13,500BTU) would technically connect and work, but wouldn't be as efficient at cooling the trailer. The Furrion Chill HE Replacement RV Air Conditioner for Coleman Setup - 15,000 Btu # FR42PV you were looking at would however be a compatible fit since it comes with an adapter to connect to your system's 9-pin plug. This unit, as well as the others that we currently offer, does not have a heat pump so you would be losing this... view full answer...
To use the Andersen Ultimate Connection 5th Wheel Trailer Hitch System # AM3200 with a Road Armor pin box you'll need to reach out to Andersen for their lockout adapter. This will install on the pin box and prevent it from rocking back and forth so that it can be used with the Andersen Ultimate hitch. view full answer...
The only custom hitch we can confirm will fit your 1999 Ford Super Duty with the Ranch Hand Legend rear bumper is the Curt # C14355. This is a Class IV hitch instead of V with a 10,000 lb max gross trailer weight. It looks like even if you have the F-350 the max towing capacity for the vehicle is 10,200 lbs so this hitch should be adequate.
If you're still set on a Class V we have the # C15810 but I can't confirm this is compatible since it hasn't been tested. The hitch mounts in the... view full answer...
Is it possible that the third hole isn't visible on your 2000 Nissan Xterra right now but it's there? We don't have a different hitch that uses a different mounting setup though so I would be surprised if you didn't have the three holes. view full answer...
Yes, we have the Yakima Overhaul HD ladder rack part # Y01151-5955 which comes with adapters that fit the T-slots that you have on your Retrax tonneau cover. This gives you a really nice rack that is adjustable in height and span between the bars as well. view full answer...
The difference between the Yakima Landing Pad 1 # Y00221 and Landing Pad 26 # Y75ZR are what they fit.
The two come with different hardware and the Landing Pad 1 is mostly for some factory tracks as well as specific vehicles, while the Landing Pad 26 is for Yakima tracks. So the right one is really going to depend on what application you have. view full answer...
Hello Janet. That is actually a really good idea for a product. Unfortunately, MOrryde does not make any kind of rubber boot or cap to go on the feet of the steps. The idea is to protect the foot, keep them from getting scratched and increase friction, right?
I feel like coming up with your own rubberized protector would not be too hard. I have seen rubberized tape like "flex tape" at stores. I would cut a piece of that to fit the bottom and/or sides of the foot. This way the foot will... view full answer...
Hi Mike; the # HE86XR will fit your 2024 Sierra 3500 dually but it is designed for vehicles with a 2"-4" lift. If your truck is at stock ride height the correct anti-sway bar is the Hellwig Adjustable Rear Anti-Sway Bar # HE66XR. view full answer...