With the tire size 235/55 that you included, I cannot confirm for sure if the Thule Spare Me 2 Bike Rack # TH963PRO will fit your non-standard spare tire for sure. This is because I need the last number of the tire size (the wheel's diameter). However, I can confidently say the rack will most likely fit your wheel's diameter because the maximum diameter that is compatible with the Spare Me 2 is 33 inches (which is a pretty large tire). Although, I can 100% confirm that the 235mm width... view full answer...
The third key is actually a change key like # 853-1251 that you would use if you wanted to change the lock cylinders in the bike rack to match those on another Thule product that also uses the One Key System. It is not used for any other function on the rack. view full answer...
Neither the 24x64 etrailer Cargo Carrier for RV Bumper # e83YR nor the 24x60 etrailer Cargo Carrier for RV Bumper # e99049 come with a spare tire bracket. If you were trying have both the carrier and a bumper mounted spare tire carrier, like # TR-2, then you'd want to go with the smaller 24x60 # e99049 carrier to have enough room on the bumper for the spare tire carrier. view full answer...
The top part with the hook on the Spare Tire Rack for Enclosed Trailers, # RA-16, is not available as a separate part. A lot of customers who purchase this carrier also add some additional e-track like # E19146, perhaps for exactly the same reason. view full answer...
The 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR is just the cargo carrier with brackets to allow it to mount to a 4" x 4" and 4-1/2" wide x 4" high RV bumper. You would need to slide the cargo carrier to one side of the bumper and use a mount like the Ultra-Fab Folding Spare Tire Carrier for Trailers and RVs # UF15-954730 in the available space. view full answer...
The Draw Tite Hitch Spare Tire carrier part # 6715 does include hardware for securing the wheel to the mounting surface. If you check out the review video I attached you can see the nuts and bolts laid out on the table.
You may also want the locking hitch pin part # 63232 which also is an anti-rattle device that will take out all of the movement between the hitch and the rack. I attached a review video for this as well. view full answer...
Part # Y8820103 is a set of TWO replacement rubber straps for specific older Yakima bike carriers such as the BigHorn. Each bike needs three straps so you will want to order five (5) kits in total which will give you a spare. view full answer...
Swagman has made some changes to some bike rack models, including the Swagman Original, # S64400. Now, instead of a threaded hitch pin with a clip, you should have the threaded hitch pin that can accept a lock. What you can use is Locking Anti-Rattle, Threaded Hitch Pin, # S64027, which is a lock for 2 inch racks and a spare hitch pin. view full answer...
Yes! The following Rhino-Rack roof rack includes all the parts you need to install on your 2022 Dodge Charger with a bare roof:
- Rhino-Rack Vortex Aero Crossbars - 49" # RRVA126B-2
- 2500 Series Legs # RRRLKVA
- Custom DK Fit Kit # DK298
I went ahead and attached a video of this exact setup on a 2018 Dodge Charger. The installation process and fitment is virtually the same on your 2022 model. view full answer...
The Replacement Standard Wheel Holder for Hollywood Racks Sport Rider E-Bike Rack - Right # HRSPRWHR-HD is the standard for a max tire width of 3". The # HRSPRWHR-F-HD is the standard right hand wheel holder for a max tire width of 5" and the # HR39FR is the universal for a max tire width of 5". view full answer...
Yes, the Malone MicroSport Trailer for 2 Fat Bikes and 2 Kayaks # MPG461KB will have the Certificate of Manufacture included from Malone.
If for any reason you are unable to locate this document in the paperwork, please contact our customer service department so that we can get you a new certificate. It is rare but I have seen this certificate get lost in shipment.
I do recommend getting as Spare Tire # MPG465 as you never know when you might be out and get a flat. view full answer...
The Saris Superclamp EX part # SA4025F that you referenced does come with 4 wheel trays that are wider to allow fat tires to fit on the rack. I attached a picture to this page where you can see all 4 of them mounted to the bike rack.
The max tire width this rack can accommodate is 4.5 inches also. view full answer...
The RockyMounts BrassKnuckles Roof Bike Rack for Fat Bikes # RKY1201-FB is only available in black but for a white wheel-mount bike rack I recommend checking out the Thule UpRide Roof Bike Rack for Fat Bikes # TH599000-FB instead. I've actually had the opportunity to install the standard tire version, part # TH599000, a few times so I'm attaching my video of this on a 2020 Audi Q7 for you to check out. view full answer...
The Thule T2 2-Bike Rack, part # TH9045 does come with wheel cradles that are designed to work with bike tires up to 5 inches wide.
The bike rack has a 100-lb capacity when carrying 2 bikes and a 60-lb maximum capacity for 1 bike. The maximum wheelbase for bikes is 48 inches. view full answer...
The Yakima EasyRider Double Decker Trailer with SkyRise HD Tent # Y08129-3627 will include the trailer with heavy duty crossbars, roof tent, 2 adjustable jack stands and 4 wheel chocks.
I do recommend getting the Spare Tire and Carrier # Y08125 with this that will mount below the trailer. view full answer...
I spoke with Let's Go Aero about the Fat Tire Adapter Kit # BMP038. My contact there said that the bottom straps are already compatible with most fat bikes, there are only a couple it would not fit, so that is why they did not come with additional straps. But she did also say that since they have had this very question before they will be making the longer straps available very soon. view full answer...
The RockyMounts HighNoon FC Solo Bike Rack - 1-1/4" and 2" Hitches # RKY87RR does not come with a ramp. If you would like a bike rack with a ramp to allow for easy loading and unloading, then I recommend looking into the Yakima OnRamp bike carrier which comes with a 36" long ramp. For 1-1/4" hitch receivers go with # Y96FR and for 2" receivers go with # Y36FR. The weight capacity is 66lbs per bike and it can hold bike tires that are up to 3-1/4" wide.
An integrated cable lock is included... view full answer...
You would only need one Swagman Hitch Pin Lock, part # S64027, to secure the Swagman XTC4 Bike Rack, part # S64665, to your trailer hitch to help deter theft. It would be possible to unbolt the rack from the shank and take the rack. If you wanted to add another locking hitch pin for added security, you could.
We also offer the 10 Foot Cable Lock, part # e98891, which can be used to lock the bikes to the bike rack.
The rack now comes with rubber straps as an upgrade to the old hook and... view full answer...