Thanks for reaching out, Barry!
The 833 lbs WLL rating for the BoatBuckle G2 Retractable, Ratcheting Transom Tie-Down Straps # IMF08893 is per strap, so together you're looking at 1,666 lbs. view full answer...
Hey Albert,
The BoatBuckle Personal Watercraft Cam Buckle Tri-Down Strap w Soft Hook # IMF14218 has 8' of length for the second hook to work with to properly secure your WaveRunner. This has a 400lb safe working weight limit so it should be a good fit along with a bow tie-down for your 700-ish lb WaveRunner. view full answer...
The biggest difference between the TorkLift Camper Tie-Downs # TL84FR, # TL44FR & the TorkLift Talon Camper Tie-Downs # TL73QR & # TL44XR is that the Talon's are made of Aluminum which is going to be approximately 30-50% lighter than the traditional steel tie downs.
Other than that, they are the exact same and will do the same job. The other caveat is the aluminum Talon tie downs are also going to quite a bit more expensive.
With either choice you are also going to need a set of turnbuckles... view full answer...
We've got a couple of options depending on which bed length your 2001 Ford F-350 Dually is. I have listed them below:
8 Foot Bed - TorkLift Camper Tie-Downs - Custom Frame Mount - Front item # TLF2011
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear item # TLR3504
6-3/4 Foot Bed - TorkLift Camper Tie-Downs - Custom Frame Mount - Front item # TLF4007
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear item # TLR3504 view full answer...
Since you have running boards that run all the way to the rear, the only cusotm tie downs available for your 2021 GMC Sierra 1500 are for the rear using the TorkLift Camper Tie-Downs - Custom Frame Mount # TL54FR.
To properly install your pop up camper in your truck you're going to need all 4 tie downs, so the only way you'd be able to do that is if you used # HSSF which is an in bed tie down. view full answer...
The correct tie-downs for your 2019 Ram 3500 Tradesman short bed depend on your hitch. You can choose from the following:
With a factory installed hitch or non-Torklift aftermarket hitch
-TorkLift Talon Camper Tie-Downs # TL52XR (front) and # TL34FR (rear)
or
-TorkLift Camper Tie-Downs # TLD2141 (front) and # TLD3112 (rear)
With a TorkLift SuperHitch Magnum 30K
-TorkLift Camper Tie-Downs # TLD2141 (front) and # TLR3510 (rear)
Keep in mind, none of these will fit if you have the aftermarket... view full answer...
You will want a bow/stern tie-down for each kayak so the Yakima Bow/Stern Tie-Down Ropes w/ Ratchets and Strap Loops # Y04031 will cover the other two kayaks. You may also want the # Y07416 to go with them.
I reached out to Yakima about the additional cinch straps and they said it all depends on the size of the kayaks. They said if they're too wide additional straps # Y05006 are necessary and said it would be best to get the straps just in case since you will regularly carry three. They... view full answer...
Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for.
For the front, you'll want the TorkLift Camper Tie-Downs # TL87CR (TorkLift P/N F2032), and for the rear you'll want the TorkLift Camper Tie-Downs # TLF3008 (TorkLift P/N F3008).
In addition to the tie downs, you're also going to need a set of turnbuckles # TLS9529-2-LK to secure your camper to the vehicle. view full answer...
Hello Jerry, I am sorry to say that we do not offer any custom fitted camper tie downs for a 2024 Nissan Titan XD. We carry both the Torklift and Happijack brand tie downs and neither of these manufacturers make anything for this vehicle. It may be possible to use some universal no-drill bed-mounted tie downs like the Brophy # HSSF, but we have not tested for fitment so we cannot confirm that they will work. I have linked the review video and installation instructions below if you want... view full answer...
The correct camper tie-downs for your 2023 F-350 DRW are the TorkLift Camper Tie-Downs - Front # TL87CR and TorkLift Camper Tie-Downs - Rear # TLF3008 view full answer...
The correct camper tie-downs for your 2023 F-350 DRW are the TorkLift Camper Tie-Downs - Front # TL87CR and TorkLift Camper Tie-Downs - Rear # TLF3008. view full answer...
Hey Kenneth, thanks for the question and the answer is yes, TorkLift tie-downs are specific not only to the year make and model, such as the 2014 Ford F-350, but also specific to the length of your bed, if you have running boards, and the hitch you have. For example, on a 2014 Ford F-350 with a 6-3/4' bed, no running boards under the bed, and a factory hitch you would use the TorkLift Camper Tie-Downs - Front # TLF2012 and Rear # TLF3006.
Or for a '14 F-350 with an 8' bed, no running... view full answer...
That's a great question Mike and I have an interesting answer. There actually isn't any specific weight capacity for the HappiJac Truck-Mounted Camper Tie-Downs item # LC182910-182971.
These are designed to handle the weight of any truck bed camper, and that's true of any camper tie-down, which is why there isn't a designated weight rating. If a camper can fit inside the bed of your F-350, the HappiJac tie-downs will safely hold it in place.
The only other thing you will need with these... view full answer...
Hey Ken,
The tie-down bracket sits right where the Draw-Tite Sportframe Trailer Hitch Receiver # 24967 needs to sit to mount. The manufacturer most likely could've just built the hitch to accommodate this but chose not to. If you need a tie-down point then I recommend using the safety chain loops on either side of the trailer hitch receiver tube. view full answer...
Because you are using the TorkLift Front # TLD2140 and Rear # TLD3113 frame mounted Tie-Downs you are going to want to use their Turnbuckles # TLS9529-2-LK. This is due to the length of them as the Happy Jack # LC182898 have shorter turnbuckles due to them using a bed mounted front anchor. The TorkLift Turnbuckles # TLS9529-2-LK come with locks as well to protect your investment. view full answer...
Hey Brian, so according to TorkLift they don't have any tie downs for the front but for the rear you are going to want the TorkLift Camper Tie-Downs # TL54FR.
Since your truck has factory running boards that extend under the bed, there aren't going to be any front tie downs available. view full answer...
Hi Mark, thanks for the question and yes, the Brophy Slide In Camper Tie-Downs # HSAB for your 2024 Ram 3500 are sturdy enough for your Lance 825 slide-in camper.
These will work so long as you do not have the RamBoxes in your truck, and while the tie-downs themselves don't have a weight capacity, the necessary turnbuckles do - the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP.
The # TDHP have a 3,000 lb capacity which is plenty for your Lance 825 from the specs I was... view full answer...
The TorkLift Camper Tie-Downs Front # TLC2224 and Rear # TLC3220 are what you will need for your 2024 GMC Sierra 1500 Denali short bed diesel.
I recommend using the TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK to secure your slide in camper to the tie-downs. These are stainless steel to resist corrosion from the elements and include locks. view full answer...
Hey James,
The correct rear camper tie-downs to go along with your new TorkLift SuperHitch Original Trailer Hitch Receiver # TLD1102 are going to be part # TLR3505. These will mount directly to the hitch at the end of the crosstube. view full answer...