Thanks for reaching out!
The correct rear anti-sway bar for your 2017 Thor Axis on the Ford E-450 chassis is part # RM-1139-147. We've had the chance to install this on a 2017 Chassis so I've linked that and the installation instructions for you to check out. view full answer...
The Draw-Tite Front Mount Trailer Hitch Receiver # 65053 is confirmed to fit on the 2008-2017 Ford E-450 RV Cutaway chassis. So it will fit your 2017 Thor Outlaw 29H class C motorhome on either a 2016 or 2017 Ford E-450 chassis. The chassis changed for 2018.
I recommend installing the SumoSprings Solo Custom Helper Springs # SSF-106-40 to improve your front suspension. These springs will replace the factory bump stop and provide up to 500lbs support for a more stable ride with the front... view full answer...
We do have a specific product like the SumoSprings that fits your 2022 Thor Omni RS36 on the Ford F-600 chassis; the Timbren Suspension Enhancement System for Front # TFF550SDE and Rear # TFRSDE. This installs similarly to the SumoSprings and is simply a different brand - it doesn't look like SuperSprings has a fit for this chassis as of yet (April 2022).
This kit replaces your factory bump stops so you'll get better support for your motorhome. view full answer...
I checked with SumoSprings and they recommend the black springs, so the SumoSprings Solo Custom Helper Springs part # SSF-106-47 for the front and the SumoSprings Maxim Custom Helper Springs part # SSR-106-47-1 or the SumoSprings Solo Custom Helper Springs part # SSR-130-47 for the rear on a 2022 Thor Freedom Elite with Ford E-450 Chassis.
Please note, if you have lines or anything on the outside of the frame, above the leaf springs where the Maxim will mount, you'll need to go with the Solo. view full answer...
For your 2014 Thor Siesta Motorhome built on a Mercedes Sprinter 3500 chassis, I recommend the SumoSprings Solo Custom Helper Springs item # SSR-338-54. These helper springs have a 1,400 lbs capacity that will help lift up the back end of your motorhome while not giving you a rough bouncy feeling.
The SumoSprings Maxim Custom Helper Springs item # SSR-106-47-1 you were looking at are for a 2104 Thor Siesta built on a Ford E-350 Chassis. view full answer...
Yes, the Replacement Flush Ball Seal for Dometic RV Toilet # DOM63FR will work for your Dometic 321 Full-Timer RV Toilet # DOM99FR.
This flush-ball seal also works for the 301 series, 300 series, 320 series, 311 series, and the 310 series. view full answer...
You can use a swinging hitch extender like the Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches # PVP20B for the GearSpace 34 Enclosed Cargo Carrier for 2" Hitch # HGK819 on your 2-inch hitch of your 2020 Thor Tellaro Camper. The reason why the Kuat Pivot 2 is a great choice is because it swings at 90 and 120 degree angles. However, the GearSpace 34 has a weight of 160 pounds, which leaves only 90 pounds of cargo carrying capacity in order not to exceed the 250 pound capacity... view full answer...
The Roadmaster Exact Center Steering Stabilizer # RM47MR is the stabilizer you need for your 2022 Thor Freedom Elite 22FE. This includes the custom mounting brackets for attaching to your Ford E-350 cutaway chassis. view full answer...
You can definitely replace your Dometic CareFree awning with the Solera 12V XL Power RV Awning # LCV000335015-362241. You'll just want to ensure the length is correct to replace your current awning since the arms are a bit different between the two awnings.
Solera awnings have vertical arms that will mount to the wall of your motorhome. The # LCV000335015-362241 has 78" long arm brackets so you'll need to ensure that these won't get in the way of anything else (windows, door handles,... view full answer...
I have an option with less of an angle but there is not an option that is perfectly vertical besides the Roadmaster Spare Tire carrier part # RM-195125 like you mentioned. However, the Draw-Tite Spare tire carrier option part # 6715 has less of an angle compared to the Curt. It is also angled out instead of in so the tire is angled dramatically upwards like with the Curt option. I have attached photos so that you can compare the two carriers. The Draw-tite has a universal bolt pattern which... view full answer...
The correct Roadmaster Reflex Steering Stabilizer for a 2017 Thor Palazzo Motorhome on a Freightliner XC-Series Chassis is part # RM-RBK18-RSSA. view full answer...
The 2018 Thor Challenger 37TB is on a Ford F-53 Chassis so the correct Roadmaster Reflex Steering Stabilizer is part # RM-RBK25-RSSA. view full answer...
It looks like the High Pointe Over the Range RV Convection Microwave # HP94ZR would be the correct replacement for your EC942K9E High Pointe microwave oven. It has the same exact dimensions, power output, and capacity. view full answer...
The Air Lift kit part # AL57131 does fit your 2020 Thor Four Winds 31E but like all of our options that fit your motorhome the air bags attach to the top of the spring pack of the suspension. view full answer...
Yes, you will be able to replace those with the # AKEBRK-6. The 023-326-00 and 023-327-00 are the same as the # 23-458-459 which are 12" x 2" brake assemblies for a 6k axle. The # AKEBRK-6 has the same 12" x 2" dimensions and is rated for 5,200-7,000 lb axles so they will be a great replacement. If you need new mounting hardware you can use the # BRKH12. view full answer...
The ladders we offer, like the Stromberg Carlson Exterior RV Ladder # LA-401BA you were looking at, sit much closer to the wall of the RV so you wouldn't have that large 24" overhang. These ladders are "cut-to-fit" so you could use them on your 2015 Thor ACE 30.2, but you'll most likely have to fill in the old mounting hole locations with sealant and drill new mounting points in order to get the ladder mounted. If you want an exact replacement you can reach out to the manufacturer or a... view full answer...
Motorhomes require a slightly different style of entry door lock, of which we currently of two options:
Bauer Products Motorhome Door Lock # BA64FR, this lock requires a 5-1/4" wide x 4-1/2" tall cutout hole.
Bauer Products European Style Motorhome Entry Lock # BA58AR, this requires a 7-7/16" tall x 3-3/4" wide cutout hole.
You'll want to remove your current lock and measure the cutout hole dimensions in order to determine the correct fit. If neither of these fit then you can try reaching... view full answer...
Sounds like you are asking about the turnbuckle kit to use with the Brophy Camper Tie Downs part # HSAB that you referenced. For that we have the Brophy Turnbuckles part # TDHP that was designed to be used with the HSAB and would work really great. view full answer...
For a 2016 Thor ACE Motorhome 29.2 with a Ford F53 chassis and V10 engine the correct steering stabilizer would be the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes # RM33RR. We do not currently offer the Safe T Plus brand so I don't have any fitment information for their products. I've attached one of my installation videos below for this stabilizer where I'll go over the installation process as well as the benefits you can see from installing one. view full answer...
For a 2016 Thor ACE 30.1 the correct air suspension is the # AL88240 from AirLift, which will give you 5,000lbs of support to the rear suspension of your motorhome.
The kit includes the Schroeder valve to manually inflate the air bags as needed, though its a lot easier to go ahead and install an air compressor kit like the # F2158 to allow you to adjust the air pressure in the air bags as needed from the driver seat. view full answer...