The Phoenix Faucets 8" Single Handle RV Kitchen Faucet w/ Pull Down Sprayer # PF231461 has a shipping weight of 3 lbs. When you remove the packaging for shipping this will only weight a couple of pounds so it will be a great lightweight option for your RV kitchen and bathroom. view full answer...
The hot and cold metal braided water lines on the Ultra Faucets RV Bathroom Vessel Sink Faucet # 277-000196 are approximately 20 inches long. The ends where the water lines thread into are 3/8 inch female connections.
If you forward to about the 3:00 mark on the video I attached, it will show these measurements, but I've also attached a photo for reference.
UF36103 Ultra Faucets RV Bathroom Basin Faucet view full answer...
I went out to the warehouse to measure the line length on the Phoenix Faucets 8" Single Handle RV Kitchen Faucet # PF231321. Measuring from the end of the threaded shaft the lines are 9-1/2 inches long. Measured from the base of the faucet they are 12 inches long. I have included a picture showing these measurements. view full answer...
The Empire Faucets RV Tub Faucet and Shower Head w/ Temp Control - Single Lever Handle # EM35HR weighs a total of 3 pounds. The inlet shanks have an inner diameter of 1/2", an outer diameter of 13/16", and a length of 3/4". view full answer...
The Ultra Faucets Dual Handle RV Kitchen Faucet with Pull Down Spout # 277-000068 is 15 inches tall at the very top of the faucet. I've attached the video that shows this measurement.
For your 10 inches tall restriction, I recommend the Ultra Faucets RV Bar Faucet - Dual Handle # 277-000069 which is 9-1/2 inches tall at the apex. The measurements are 6" long x 9-1/2" tall x 5" deep overall.
For a kitchen style faucet, the Phoenix Faucets 8" Dual Handle RV Kitchen Faucet - Hi-Arc Spout... view full answer...
I was able to fit a 7/8" socket on the hot and cold inlets for the Empire Faucets RV Bathroom Faucet # EM35PR so that's the size wrench you're going to need. view full answer...
The thread on the Replacement Spray Head for Phoenix Faucets Hybrid Pull Out Kitchen Faucets # PF281032 are located on the inside and measure .6" from thread to thread on the inside (ID). It is has an outer diameter of .8"
The Replacement Spray Head for Phoenix Faucets Hybrid Pull Out Kitchen Faucets # PF281032 fits onto a threaded hose that has threads that are .6" wide (OD).
The Replacement Spray Head for Phoenix Faucets Hybrid Pull Out Kitchen Faucets # PF281032 is the correct replacement... view full answer...
The base of the Empire Faucets RV Bathroom Faucet # EM35PR measures 5-3/4" wide x 2-1/4" deep. I've attached some photos showing these dimensions as well as a review video for you to check out! view full answer...
The overall install height of the Replacement Quick Disconnect RV Outdoor Shower Faucet for Empire Faucets Outdoor Shower # EM24FR is 2-3/4 inches. view full answer...
The base of the Phoenix Faucets Catalina RV Bathroom Faucet # PF222504 measures 6-1/8" wide and the inlets are 4" apart on center.
I've attached a dimensional photo of the brushed nickel version of this faucet for you to check out. view full answer...
The spout sticks out 5-1/4 inches for the extended spout faucet you asked about:
- Empire Faucets RV Bathroom Faucet - Single Lever Handle - Extended Spout - Brushed Nickel # EM35PR view full answer...
The base of the Empire Faucets RV Kitchen Faucet w/ Pull-Down Spout # EM34JR measures 9-5/8" long x 2-3/8" wide.
Attached is a review video where our team highlights this faucet for your reference. view full answer...
I pulled the Empire Faucets Hybrid RV Bar Faucet # EM46FR and found that the inlet shanks are indeed 4" apart center to center. I'll have the description update to reflect this measurement. view full answer...
The overall height of the Ultra Faucets Side Lever RV Kitchen Faucet # 277-000175 is 15-5/8 inches.
I have attached a link to a review video you can check out for even more dimensions. view full answer...
The Phoenix Faucets 8" Dual Handle RV Kitchen Faucet # PF231402 measures 11" high and 10-1/4" wide; I've added a photo showing these dimensions for you as well. This faucet features dual lever hands for easy hot and cold application and a sleek brushed nickel finish.
I've also added a link to a video review of this faucet for you to check out. view full answer...
The base of the Ultra Faucets RV Bar Faucet part # 277-000069 measures 2" deep and the inlets are centered on the base so if you simply divide by two you can get the clearance from the center of the inlet to the back of the base which is 1". view full answer...
From the center of the base on the faucet to the center of the spigot on the Ultra Faucets Single Handle RV Kitchen Faucet with Pull Down Spout # 277-000191 that you referenced measures 9 inches. view full answer...
The overall depth of Phoenix Faucets 4" Dual Handle RV Bathroom Diverter Faucet - Brushed Nickel Finish Item # PF222441 is 5 inches. The base is 2 inches wide so from the base to the end of the spout is approximately 3 inches. view full answer...