The Curt trailer wiring harness, # C56225, works and installs more like the factory one if the vehicle had a factory tow package. There is a jumper plug that you will connect at the front of the vehicle and another harness that plugs in at the back. it also includes 3 relays which the factory tow package would include. I have included a link to the installation details for you.
The Curt harness, # 56087, plugs in line with the tail light wiring and draws all of the power through the tail... view full answer...
The K-Source Replacement Side Mirror # KS69014S folds up manually with the "breakaway" function in order to reduce damage if it is struck by anything. The electrical function referred to on the product page is the electrical adjustment of the mirror that can be done with the factory controls. This is a factory replacement for the side view mirror on a 2006 - 2013 Suzuki Grand Vitara and you will have to fold the mirror in towards the vehicle by hand in order to operate that feature. view full answer...
Draw-Tite Max-Frame Trailer Hitch # 75448 for your 2007 Suzuki Grand Vitara has a wiring harness mounting bracket welded to the hitch cross tube. Curt hitch # C13001 does not. If you will be using the hitch for just accessories like a bike rack or cargo carrier then you would not need to worry about a wiring mounting bracket.
But if you will be doing some towing then having the mounting bracket means one less part you would need if you wanted to permanently mount a trailer connector to... view full answer...
You are correct. With a 3 terminal solenoid like the # PK5231201, the mounting hardware will serve as the ground connection. A 4 terminal solenoid like the # PK5232401 will require a dedicated ground wire from that additional terminal for this function.
When choosing between the two, I do recommend going with a 3 terminal like # PK5231201, as it simply eliminates the need for a separate ground wire, which will in turn require you to drill another hole into the trailer's frame. view full answer...
A Euro-style ballmount could be used in the Curt Class I, part # C11443. The # C45561 offers a 1-7/8 inch ball on a 3-1/8 inch rise. The Euro ball mounts are actually rated for a Class II hitch, but as long as you don't exceed the 200 lb tongue weight capacity of the hitch, you'll be fine.
This hitch would sit a few inches below the rear bumper, as shown in the provided photo. Unfortunately, I do not have the exact measurement.
If you'll be towing, you'll also need a wiring harness.... view full answer...
Go To Results