You only need the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 if your Crosstrek does not already have a 4 pole at the back. If you already have a 4 pole, then you'll just need # ETBC7 and you'll be set. view full answer...
Hey Randy.
You can install the Mighty Cord Trailer Connector Adapter # A10-7084VP and cap off the blue brake controller output wire with some electrical tape since the Prodigy RF will not be connecting to it. This system detects deceleration and activates the brakes accordingly and the remote gives you the ability to read errors and manually activate the brakes.
The yellow wire on the # A10-7084VP can also be capped off with some electrical tape unless you need a reverse light signal.... view full answer...
Hi Cole,
So the Air Lift WirelessAIR Suspension System for Air Helper Springs - Upgrade Kit # AL87DQ is meant just as an upgrade to an existing Air Lift WirelessAIR compressor like part # AL74000EZ.
The Air Lift app won't be able to see the compressor as it is not designed to do so, and that's also why there is no remote in the kit. If you didn't have an existing compressor and wanted the rest of the parts in the upgrade kit you'd need the Air Lift WirelessAIR Suspension System for Air... view full answer...
Jason, to be able to use the Redarc Tow-Pro # RED44FR on your your 2021 Subaru Crosstrek Hyrbid you're going to need to first add the Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit # C59496 which will give you the wiring needed to add a 7-way with # ETBC7. view full answer...
Go To Results