bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Northwood


  • Fat Tire Adapter for Swagman Bike Rack with Shank SR-640X-00
  • We have three Swagman fat tire bike racks. If the bike rack is a Swagman XTC the adapter you'd need is the part # S64674, the Swagman G10 or E-Spec rack part # S64679, or the Quad 2+2, Dispatch and Chinook part # S64694. The part number you mentioned seems to match up with the XTC so it looks like you need the part # S64674.
    view full answer...

  • Shocks for a 2019 Northwood Arctic Fox Travel Trailer
  • While we do not sell direct replacement shocks for your 2019 Northwood Arctic Fox, we do have several bolt on shock absorbers that can act as replacements. I've linked to a list of them below. If you look at something like the Lippert Components Bolt-On Shock Kit, part # LC281255, you'll see how they are designed to work with your leaf springs on 2-3/8" axles to absorb shock and have an easy, bolt on installation. I've linked to a video review of this kit for you to look at.
    view full answer...

  • Adding Remote to Lippert Leveling System on 2022 Northwood Arctic Fox Grande Ronde 28-5C
  • You can add a remote to your Lippert Ground Control 3.0 # LC358590 on your 2022 Northwood Arctic Fox Grande Ronde 28-5C. You need the Replacement Touchscreen Remote w/ Charger for Lippert Ground Control 3.0 Electric Leveling System # LC358601. The included instructions will list the steps to sync the remote.
    view full answer...

  • Replacement Bearings for AL-KO Axle on 2013 Northwood Arctic Fox 29-5K
  • Since AL-KO is no longer around, you will need to check your existing bearings to find the correct replacement. If you remove your hub you can look for the bearing numbers stamped in the face of each bearing. If these are worn or missing you can measure the inner diameter of your bearings using a digital caliper like # PTW80157. See the diagram below. If you find that you have a # 14125A outer and # 25580 inner bearing with a grease seal that has a 2.125" inner diameter you will be able...
    view full answer...

  • What Size Zerk Fittings Does Dexter Equalizer Use
  • We have confirmed with Dexter that the EZ lube spindles on their axles have a standard 1/4" pipe thread fitting that can be replaced with part # Gzerk that we carry. We don't carry an angled version of this though.
    view full answer...

  • Replacement Equalizer, Shackles and Shock Kit For a 2022 Nash 23D Travel Trailer
  • The Triangular Equalizer # TREQ310 is a replacement for the Dexter 13-10 on your 2022 Nash 23D travel trailer. You should consider upgrading to the MORryde ALLTREK 4000 Shock Absorbing Equalizers # MR89DR. These will pair with either the 2-1/4" # MR46ZR or 3-1/8" # MR76ZR shackle kits depending on the length from center hole to center hole on your shackle links. While we do not carry the same KYB shocks installed by Nash we do have the Lippert Bolt-On Shock Kits. These are available for...
    view full answer...

  • Replacement Brake Kit Recommendation for a 2022 Northwood Arctic Fox 27-5L 5th Wheel
  • Your 2022 Arctic Fox 27-5L 5th Wheel should have 5,200 lb axles (I've never heard of 5,600 lb axles before) which means you'll have 12" brakes on them. I'll be happy to recommend a new set of brakes but unfortunately you can't upgrade to the next size up because the mounting bolt pattern is different, the brakes are physically larger, and the rating is 8K which would be way too much for your trailer. For your application I recommend going with the Dexter Nev-R-Adjust Electric Trailer Brake...
    view full answer...

  • How To Choose Correct Replacement Right Rear Leg for Lippert Ground Control 3.0
  • The correct Replacement Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System is part # LC428493 for 22-1/2" or part # LC344792 for 24-1/2". I don't have any way to look up which you need so you can either measure or call the trailer manufacturer. If you are going to measure, do so from the bottom of the foot while retracted to the top of the motor.
    view full answer...

  • Replacement Bearings for 1998 Nash Travel Trailer
  • It sounds like you have a 1998 Nash 26J. Based on what I have found this has a GVWR of 7,000 lbs which tells me you have 3,500 lb axles. Assuming that is the case, you will more than likely need Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle # BK2-100. This kit has the standard bearings and grease seal for a 3,500 lb axle. The only way to truly be sure is to check your current bearings and grease seal. You can pull the hubs and either look for the part...
    view full answer...

  • Northwood Arctic Fox Travel Trailer Replacement Motor for Electric Slide
  • From the research I have done, I believe the slide out on your Northwood Arctic Fox Travel Trailer uses Replacement Gear Motor Assembly for Lippert Electric Slide-Out, # LC386322.
    view full answer...

  • Best Replacement Stereo for Touch Audio VD-300i
  • The iRV RV Stereo, # IRV64FR is a good replacement. This is a Double DIN stereo with HDMI, AUX, Bluetooth and an App Control.
    view full answer...

  • Replacement for Equa-Flex Equalizers on 2017 Northwoods Fox Mountain 235RLS
  • I think your measurements are a little off because the equalizer is worn and compressed. What you have there is definitely the Equa-Flex # LC279687. This is going to be the best option for a replacement since it is what came on your trailer. Using this equalizer will ensure that your other suspension components work together properly since it has the same dimensions. There are other options out there, but the dimensions will be different and could throw off other components. Also, you...
    view full answer...

  • Replacement Wheel Center Cap and Plug For a 2009 Quicksilver Livin-Lite 5.0 Tent Trailer
  • It sounds like you are looking for a snap in plug like the # LHSI60C which fits on a Wheel Center Cap # LHCS102-SI60C. Unfortunately I have no way to see exactly what parts were installed by the manufacturer for your 2009 Quicksilver Livin-Lite 5.0 Tent Trailer. Instead I can tell you the plug fits a 2" hole while the center cap fits a wheel with 5 lugs and a 3.19" pilot diameter. If this is different than the sizes you have or you are looking for something different please let me know.
    view full answer...