We have some suspension enhancements for your motorhome but aside from these parts we don't have any OEM suspension replacement parts so you'll need to reach out to your local RV or vehicle dealer for those parts.
To add some suspension enhancements to your 2016 Winnebago ERA 170 A I recommend the following:
SumoSprings Solo Custom Helper Springs - # SSR-338-54
Roadmaster Rear Anti-Sway Bar - # RM-1209-131
The SumoSprings will help your OEM suspension with up to 1,400 lbs of weight... view full answer...
The Replacement Brake Adjuster Kit for Dexter 12-1/4" Forward Self-Adjusting Brakes # K71-472-00 is definitely designed for hydraulic brakes. It can be easy to assume that hydraulic brakes mean disc brakes, in which case they would be correct. This part, however, is for hydraulic drum brakes.
Although this is slightly different, the brake adjuster for hydraulic drum brakes is located on the assembly at the bottom just like an electric brake assembly. This can be seen on the Dexter Hydraulic... view full answer...
I don't have the color codes, but you should be able to easily determine which wire colors carry which circuits by using a circuit tester like part # PTW2993.
Begin with the turn signals and running lights. Have a helper activate the right turn signal while you test each wire, chances are you'll find that the green wire carries the right turn signal. Activate the left turn, which is typically the yellow wire. Testing should confirm this. The brown wire usually carriers the running lights.
As... view full answer...
The ZCI Trailer Wiring kit part # 119250KIT that you referenced is a confirmed fit for your 2014 Mercedes GLK350 as it can basically be installed on any vehicle and since it does not require cutting or splicing into the vehicles wiring it would not void any warranties either.
Instead of splicing into the wires the sensors of this kit just clamp around them and sense that voltage is being carried on the wire and that is what is used to signal which trailer wiring circuit needs to activated.... view full answer...
We do sell the Handle # DU73MR and Binder # DU33MR separately from the Durabilt Ratchet Chain Binder w/ Removable Handle # DU57GR. This will allow you to get a spare handle or to use multiple binders on your trailer without having to get all the extra handles along with it. view full answer...
For a 7-way adapter designed for German vehicles towing LED lighted trailer to prevent the bulb out error message we have the part # C57003.
For an adapter that plugs into a 7-way and then provides a 4-way we have the part # C35FR. view full answer...
If the key number isn't on the face of the lock, it'll be engraved into the side of the lock core. If the lock is unlocked, you can use the Yakima Control Key # Y8007835 to remove the lock core and get the code number off the side. You'd then order a replacement key, part # Y8772-XXXX with the X's representing the key number on the lock cylinder. For example, if the number on the core was A136, then the replacement key needed would be # Y8772-A136.
If the lock is not unlocked, you'll need... view full answer...
Since there is not an adapter, you are going to need to replace your fan motor when you go to replace the blade with # BVD0217-00.
The correct replacement motor that works with your Ventline VP-543 as well as the new fan blade is the Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans # BVD0218-00. view full answer...
Yes, the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Exhaust Only Fan # MA39FR is the correct replacement circuit board for your 8501 model. view full answer...
Thank you for providing those measurements. The one that is really going to matter here is the 9" measurement for your bolts, which will be your rough-in measurement. This definitely rules out the 320 which requires 11". Since you said "about," I would make sure to get an accurate measurement. The Dometic 310 Part-Timer # DOM57FR may be able to fit if that is actually 10" instead of 9.
I suspect the measurement is more like 8-1/2" which would make the Dometic 300 Weekender # DOM64FR your... view full answer...
I can definitely confirm the correct replacement straps, anti-sway attachment and lock/key for your Thule Archway XT 3-Bike Rack 9010XT; you had the strap right, but do need a different anti-sway attachment. I verified these are the correct parts for you with the manufacturer:
- Replacement Strap # 852-3006-001
- Replacement Anti-Sway Attachment # 852-3037-001
- Thule One-Key System Lock Cylinders # TH450200
I have added links to video reviews for you to check out as well. view full answer...
I empathize with you because accidents do happen but if grease got on the brake shoes of your Hydraulic Trailer Brake Kit # AKUBRK-35-D to be safe you need to replace the shoes in order to ensure proper braking.
For that you will need two of the Hydraulic Brake Shoe/Lining # BP04-120; this shoe will fit single servo 10" diameter x 2-1/4" wide shoes like your kit has. view full answer...
It does not look like you will be able to use the Tekonsha Prodigy P3 Brake Controller # 90195 with your US Gear tow brake.
I recommend changing over to the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251. This system provides proportional braking to your 2005 Jeep. It is one of the few systems that looks for 2 inputs to confirm that you are braking. It wants to see that your brake lights are activated saying that you have physically pushed the brake pedal and it wants... view full answer...
I'll start out by saying that based off the board you've mentioned it looks like you've got a MaxxFan Plus model 4700. The lift lid not opening on your MaxxFan is usually down to a bad board, and if the unit is beeping at you when you try to operate different functions, it's usually a sign that the board is bad. With that said, I would recommend testing the input/output voltage on the fan to see if it's operating correctly. If the fan operates normally, but the lid just won't open it's... view full answer...
If you're referring to the small retention clips that I have pictured below then we do carry them, but only as a package with the roller assembly under part # GMNR925. view full answer...
If you have a single speed, Bulldog jack rated for 12,000 pounds, like # BD182815, and/or powered drive kit, # BD1824200100, then this is the correct motor. The motor by itself does not include anything else like gears. For that you would need the complete powered drive kit, # BD1824200100.
If you have a 2-speed jack, the correct powered drive kit is # BD1824180100. The 2 speed motor and single speed motor are not identical so you would need to select the correct one based on your Bulldog jack. view full answer...
The replacement key you need for your Karrite cargo box is part # THKEYN074.
This key will work for you as Thule now owns the Karrite brand. view full answer...
We definitely have the replacement monitor and cable for your Rear View Safety Backup Camera System # RVS-770619N-D.
For the monitor, you will need the Mirror Monitor for Dodge ProMaster Vans 2010 and Newer # RVS-619N-D. This will be a direct replacement. For the cable, we actually have two different lengths available. The # RVS-826N will be 33 feet long and will tend to cover most everything, but if you need more length, we do also have the # RVS-825N that is 66 feet long. Both of these... view full answer...
Go To Results