The Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle # AL57291 is a confirmed fit for your 1999 Ford F-250 and is designed for compatibility with B&W gooseneck hitches. I've attached a video of this installation to assist. This kit will come with the manual inflation valves for adding or removing air pressure.
You also may want to consider adding the Air Lift Load Controller II Compressor System for Air Helper Springs - Single Path # AL25592. This will give you the ability to... view full answer...
The baby moon covers will not fit on the Provider ST205/75R15 that you referenced. Those covers like the part # AM981306 need a conventional wheel like the part # AM20514. view full answer...
The only solution for towing a fifth wheel trailer with a Ram Box truck so that you can make turns without interference is a Sidewinder pin box on the trailer.
The problem with the Ram Box is that is that it puts the rails of the bed too close together and it causes interference with the pin box of the trailer around corners.
We have heard several customers say that with a Sidewinder pin box they were able to tow a fifth wheel trailer with a truck with a Ram Box. Sidewinders move the... view full answer...
We have torsion style ramp springs like the part # ERS120D81 that you referenced. This is 81 inches long an has a capacity of 120 lbs. For a wider spring we have the part # CB250D96SHD which is 96 inches in width and has a 250 lb capacity. It can be cut down as small as 80 inches if the length is an issue. view full answer...
The lock core you need is the part # THLOCKN067. For a change key you'd then want the part # 853-1251 and you'd be set. If you wanted more matching keys you'd need part number # THKEYN067. view full answer...
The TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLC1212-30 referenced in your question is confirmed to fit your 2018 GMC Sierra 3500 with the 6-1/2 foot bed. The spare tire on your truck will need to loosened or possibly removed while installing the hitch, but it can be re-installed once installation is complete. In fact, the final step in the installation instructions (which I have attached for you to check out) is simply to reinstall the spare tire.
This hitch is custom fit for... view full answer...
For you the best option is going to be # PF211310. The actual faucet parts of this assembly can be unscrewed. I have linked a video review of it for you.
Depending on how easily the faucet needs to be able to be removed you may be able to install one such as # 277-000068. But basically with this style you would have to remove it from the sink every time you needed to fold up the trailer. I am not sure if that is how your existing faucet works but if so then it wouldn't be much different... view full answer...
In order to flat-tow your 2005 Jeep Liberty with all four wheels on the ground you will need a base plate kit, tow bar, flat-tow wiring harness, safety cables, supplemental braking system, and possibly a high-low adapter. I have attached my recommendations for each of these parts below with ease of use in mind.
For a base plate kit I recommend the Blue Ox Base Plate Kit part # BX1122 as it has removable arms which makes for a clean look while not in tow. The towbar I recommend to use... view full answer...
The Bearing Buddy Bearing Protectors # BB2047SS referenced in your question are designed to fit 2.047 inch hub bores. I was not able to locate the size of the hub bore or the grease cap used on your Haul-Master Trailer, so your best option will be to simply measure the inside diameter of your hub bore with a digital caliper.
These Bearing Buddy Protectors feature a stainless steel construction for corrosion resistance and will give you an easy way to add grease to the bearings while also... view full answer...
The bumper manufacturer would have to tell you whether or not the bumper can be used to flat tow your 2006 Jeep Wrangler. Assuming that it can then the capacity would presumably be the weight of the vehicle at the least. Since it is a bumper designed for a winch that would mean it and the D-rings would be used for vehicle recovery which would be at least the weight of the vehicle. But if there is some other capacity then EAG would be able to tell you.
If you get the green light then there... view full answer...
For your 2017 Buick Enclave I recommend the K-Source Universal Towing Mirror set # KS3891-2.
These mirrors clip on to your OEM mirror's housings to provide you with a wider field of view when towing your trailer. Their ratcheting strap system creates a snug fit to reduce vibration and they install without tools. Please see the linked video.
If you prefer a dual-lens type mirror then please consider set # KS3990.
I also linked our main page for all accessories items we have for your Enclave. view full answer...
The shortest trailer hitch extender we offer is the Brophy Hitch Extender part # HE06 which measures 7-3/8" from the center of the hitch pin hole to the center of the hitch pin hole. However, please keep in mind that this extender will reduce the tongue weight capacity of trailer hitch by 50%. The other option we have is to use an extended length ball mount like the Draw-Tite Ball Mount part # 4285 which measures 12" from the center of the hitch pin hole to the center of the ball hole.... view full answer...
For the Gorilla Lift # GL1 that you mentioned we have the Replacement Roller Assembly Kit # GMNR925 which is the correct replacement rollers. view full answer...
The Hollywood Racks Over the Top bike rack part # HRF2 that you referenced has been confirmed as a fit for your 2017 Toyota Highlander with a spoiler. This rack is also designed for fitting vehicles with larger spoilers so it would be an ideal solution for you. If you install this rack properly, don't overload it, and keep the rack and vehicle clean when in use you will not have any marks left on the vehicle.
If you plan on carrying any womens or alternative framed bikes without horizontal... view full answer...
Yes, since you have a set of above bed rails that a Reese hitch has fit in the Demco Hijacker Autoslide hitch part # DM8550034 will fit and work well. The rails you have are exactly what this hitch is designed to fit. I attached a review video for this hitch for you to check out as well. view full answer...
The part # 315-DTX is a replacement part for the Rectangular Boat Table # 315-DSH-KF which is designed to fit a 3 inch hole and comes with a table top. We don't have a way to use the # 315-DTX without the base. view full answer...
For your 2010 Dodge Ram 1500 we have the very similar Reese semi-custom fifth wheel rail kit part # RP30035-386. This is basically the # RP30035 with an extra bracket so that it fits your 2010 Dodge Ram 1500. The # RP30035 by itself would not fit. view full answer...
The Saris Bones Hitch 2 Bike Rack # SA882 installs directly to a trailer hitch and would not need a ball mount at all. Since there is sometimes confusion on which part is the "hitch" and which is the ball mount I attached a picture of this bike rack installed in a hitch plus a review video for you to check out.
If you need a hitch for your 2011 Mazda CX-7 you'd want the Draw Tite part # 75512 which is a confirmed fit. view full answer...
The Rhino Rack roof rack part numbers # RRVA106B-2, # RRRLKVA, and # DK465 that you referenced is a confirmed fit for the naked roof of your 2016 Chevy Spark and would work well to carry kayaks. The Yakima JayLow part # Y04073 would then be a great solution for a rack that can carry one or two kayaks. view full answer...
Go To Results