Expert Answers about Lexus

• Is There a Front Mount Trailer Hitch Receiver Available For a 2019 Lexus GX 460?
• As there is not a custom fit front receiver for your 2019 Lexus GX 460 you will need to have a receiver fabricated. The Curt Weld-On 2" Receiver # E17 is a great starting point for having a custom receiver fabricated. The Curt Receiver # 31367 fits a 2007 - 2009 Toyota 4Runner, 2010 - 2013 Toyota 4Runner Trail Edition and a 2007 - 2014 Toyota FJ Cruiser. These are on different chassis than your Lexus which is on a chassis closer to a Sequoia which there is also not a front receiver available...
  view full answer...


• Is There a Custom Fit Trailer Hitch Receiver Available For a 2017 Lexus RC 350 F Sport?
• I do not see that anyone makes a receiver for your 2017 Lexus RC 350 F Sport and this is likely due to Lexus saying a receiver should never be used for trailer towing or carrying any additional load with that vehicle. With that said you may be able to use the Curt Weld-On 2" Receiver # E17 if you still wish to have a receiver fabricated at a shop near you. The ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT will provide you with a 4-way flat trailer connector. This uses sensors...
  view full answer...


• Trailer Hitch Availability for 2004 Lexus RX 330
• For your 2004 Lexus RX 330 we have the Draw Tite hitch part # 75153 as a confirmed fit that would work well. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not include a ball mount with the right rise or drop...
  view full answer...


• Is There Trunk Mounted E-Bike Rack that Can Carry 62 lb E-Bikes
• Trunk mounted bike racks are all limited to carrying up to 35 lb bikes. For heavier E-bikes you'd need a hitch mounted E-bike rack like the Thule EasyFold XT part # TH903202 which has the higher weight capacity.
  view full answer...


• Installing a 5-way Trailer Wiring Harness on a 2015 Lexus RX 450h
• To add a 5-way on your 2015 Lexus RX 450h you'll first need to add a 4-way connector. If your Lexus has the factory tow package you can use # 118255. Without the tow package you'll want # C59496. Both have a powered converter. The # 118255 plugs into the existing wiring behind the rear bumper. The # C59496 must be hard wired into the wiring. The installation instructions of both are attached. Both harnesses will give you trailer light functions for brake, turn, and running lights,...
  view full answer...


• Can I Use the Stealth Hitch for 2018 Lexus RX 350 on a 2018 Lexus RX350L
• I have a solution for you, but the frame of the Lexus RX 350 is different than the frame of the Lexus RX350L, so if you've got a 2018 Lexus RX 350L you won't be able to use the Stealth Hitches Hidden Rack Receiver - Custom Fit - 2" # 391LXRX16. With that said, the Curt # C13394 is a confirmed fit and because Curt hitches tend to have the best powder coatings on them, they're a great choice when it comes to having a high quality hitch that will last for a long time. If you're going to...
  view full answer...


• Will a Trailer Hitch Fit and Affect Liftgate Sensor on a 2022 Lexus RX 350
• We do have a hitch that will fit your 2022 Lexus RX 350 with the Curt # C73DR. This hitch will still allow you to use your liftgate sensor, but you will need to kick to either side of the receiver as opposed to just swiping your foot under the bumper. If you were planning on using this for a bike rack, then I recommend checking out the RockyMounts WestSlope # RKY10222 which has a unique U-Shape that makes loading and unloading bikes much easier than most other platform racks. I've attached...
  view full answer...


• Looking for Yellow Ratchet Straps
• We do have some ratchet straps that come in yellow: # EM58501 (This is the same style as the other strap you referenced but is a 2 inch by 30 foot and rated for 3,300 pounds) # EM69627 # EM34410 # 802HD-27F # 58510 # EM52400 # 58514 # EM58500 # EM58511 Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each...
  view full answer...


• Is Wiring Available For 2015 Lexus RX 450h
• I did some checking and we do not offer a wiring kit confirmed for the 2015 Lexus RX 450h. We do add them to our site as they are released by the manufacturers and make them available to our customers.
  view full answer...


• Aero-Style Roof Rack for 2018 Lexus RX 350 with No Roof Rails
• We can help you with an aftermarket roof rack for your 2018 Lexus RX 350 that has a bare roof with no sort of rails or fixtures. The current options come from Inno, a prominent maker of OEM roof racks for many import vehicles. Their three rack systems for your RX 350 are shown on the linked page. The first two racks shown use longer cross bars which extend out past the mounting legs to give you the most available cargo space. The last one shown uses shorter bars that terminate in the...
  view full answer...


• Wiring Adapter for 2012 Lexus GX460 with 4-Pole Wiring to Match Trailer with 5-Pole Harness
• There are several ways to go about wiring together your vehicle and trailer that have different type connectors. We offer Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter # 20036 that connects to the car's 4-pole, and which provides an additional (blue) wire-lead to carry a trailer brake signal to the trailer's brakes. This extra blue wire would need to be connected to the car's brake controller output signal. This signal is not carried on the 4-pole flat connector so you would need to...
  view full answer...


• Availability of a Aftermarket Wiring Harness for a 2009 Lexus RX350 with Factory Tow Package
• We do have a wiring harness that will work on your vehicle but at this time there is not an aftermarket trailer wiring connector available for the tow package connector on your 2009 Lexus RX 350. The wiring harness that is recommended for your vehicle is the Tow Ready Custom Fit Vehicle Wiring for the Lexus RX350, item # 118478. This harness installs inline with the vehicle tail light connectors and requires a power wire, that is run to the positive post of the vehicle battery. This power...
  view full answer...


• Yakima Roof Racks for 2015 Lexus RX 350 with Raised Roof Side Rails
• It is definitely possible to replace the Yakima RailGrab roof rack on your 2015 Lexus RX 350. For this I recommend using the TimberLine Towers # Y33TR (a set of four) that grip your side rails as well as the Jetstream crossbars # Y00425. If you're needing replacement parts for the original RailGrab towers we do have some available: Replacement Upper Claw Base with Brass Nut # Y8880279 RailGrab Medium Claws are no longer available. RailGrab Replacement Pads # Y8880147
  view full answer...


• Hitch Reducer for Draw-Tite Class III Max Frame Round Tube Receiver for 2006 Lexus RX 330
• We have the adapter part # HT02 that fits 2 inch hitches like the Draw Tite part # 75153 you mentioned and reduces the size down to the size your bike rack was designed for which is 1-1/4 inch.
  view full answer...


• Trailer Hitch for 2016 Lexus RX 350 F-Sport
• We do have a 2-inch trailer hitch to fit your 2016 Lexus RX 350 F-Sport, Curt Class III hitch # C13272 that you referenced. This hitch offers no-drill installation using included hardware and the linked video shows the process. Written instructions are also provided. If you don't need wiring because your intended use is something other than towing, such as using a hitch bike rack like the Thule EasyFold # TH903202 or a cargo carrier. The term "tow package" does not have a fixed meaning;...
  view full answer...


• Is There A Trailer Hitch For 2022 Lexus RX 450h That Has The Tail Gate Kick Plate?
• There is only one hitch available for the 2022 Lexus RX 450h with the Draw-Tite # DT58GR. This does not include any kind of tail gate kick plate. We are not aware of any trailer hitch that would come with that piece. If you are in need of one you would likely need to go thru a Lexus dealership.
  view full answer...


• Fixed and Adjustable Ball Mounts for 2-Inch Hitch on 2004 Lexus GX 470
• Both hitches made for your 2004 Lexus GX 470, Draw-Tite # 75155 and Curt # 13445, are welded together as one-piece so I think what you are looking for is actually a 2-inch ball mount that slides into the square receiver opening and lets you tow. This is also sometimes called a draw bar and is what the hitch ball bolts onto. You can see one in the linked photo and an article on how to select one is also linked for you. A ball mount should be selected so that the trailer sits level to the...
  view full answer...


• Replacement Wheel and Tire Recommendation for Load Rite Boat Trailer 14F1000W
• We have wheels and tires that would work well for you. You would need to know what bolt pattern your wheels have though. If you have a 5 lug bolt pattern the part # AM30670 would work well. This has an 65 mph speed rating and inflates to 90 psi when cold. For a 4 lug bolt pattern you would want the # AM30630 which also has the 65 mph speed rating.
  view full answer...


• Trailer Hitches Available to Fit 2009 Lexus RX 350
• The Hidden Hitch trailer hitch you referenced is no longer available for your 2009 Lexus RX 350. Instead of the Hidden Hitch, an identical option is the Draw-Tite Class III Max Frame Round Tube Receiver Hitch # 75153 because Draw-Tite is Hidden Hitch's sister company. The Draw-Tite and Hidden Hitch hitches have the same design and are manufactured by the same parent company. I've attached an installation video of the Draw-Tite trailer hitch on a similar vehicle as yours, and the installation...
  view full answer...


• Best Roof Racks for 2015 Lexus RX 350 with Panoramic Sunroof
• We have options in aftermarket roof racks that will fit well on your 2015 Lexus RX 350 with panoramic sunroof. The type of rack you need depends on how the roof is configured, either with raised factory-installed roof side rails that run front-to-back or with a bare roof without any fixtures. On the linked page just click on your roof type to then see roof racks that will fit. If you have raised rails among the nicer rack choices is the Yakima Timberline/Jetstream system made of parts...
  view full answer...