bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Lexus GX 460


  • Can Rhino-Rack Ski and Fishing Rod Carrier Fit Inno Aero Shaped Crossbars
  • The Rhino-Rack Ski and Fishing Rod Carrier for Pioneer Platform Rack # RR572-43159 is compatible with the top channels of the Inno crossbars part # INXB123-130 that you referenced. That said, your bars might be too low to the roof of your vehicle for the rack to install at an angle. If this is the case you could always clamp the carrier around the crossbars.
    view full answer...

  • Will The Yakima Exo Allow Me To Fully Open The Rear "Barn Door Style" Hatch On A 2022 Lexus GX 460
  • The Yakima Exo # Y84ZR swings away to the passenger side 90 degrees from the hitch. Much like the "barn door' style hatch on your 2022 Lexus GX 460. Since the exo cannot go past 90 degrees, it likely would make contact with the rear hatch before it can fully open. You will be cutting it close. You can certainly still use an Exo system on your vehicle, you will just need to be cautious when opening the hatch.
    view full answer...

  • Will the Curt Hitch C13043 Fit on the 2014 GX460
  • Curt has confirmed that the Curt Trailer Hitch part # C13043 that you referenced will work on your 2014 Lexus GX460. I attached installation instructions for this hitch for you to check out also.
    view full answer...

  • How to Reduce Wind Noise With Inno Aero Crossbars That Are 48 & 51 Inches Long
  • While there is a solution for you to reduce the wind noise, in regards to aero bars generating less wind noise, the amount honestly depends on which crossbars. Some crossbars are manufactured with added strips on the top channels that disrupt the wind (and therefore whistling) more than others, and the Inno aero bars like your # INXB123-130 don't have that. So the best option to help reduce that amount of wind noise is with a fairing, and for your 48" and 51" long crossbars, the best...
    view full answer...

  • Will the Tekonsha ZCI 119250KIT Fit a 2017 Lexus GX 460
  • As your 2017 Lexus GX 460 has a more complicated computer system, the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT will be the only wiring harness available. The # 119250KIT also has a loop on the 4 Flat plug that is designed to keep it attached to the safety chain loops on the hitch.
    view full answer...

  • Will the Thule Pulse Cargo Box Fit Inno Aero Crossbars INXB123-130 on My 2016 Lexus GX 460?
  • Yes, the Thule Pulse Cargo Box # TH615 is compatible with the Inno Aero Crossbars # INXB123-130, As far as the antenna, even though I don't have the exact measurement of your antenna from the front of your factory crossbars, the measurement from the front crossbars to the line where the roof and hatch meet on your 2016 Lexus GX 460 is 56 inches. Using that measurement, the antenna looks about 12 inches from the back. That means that the antenna is about 44 inches from the front crossbar....
    view full answer...

  • Parts Needed to Install Curt Echo Under-Dash Wireless Controller on 2022 Lexus GX 460
  • To connect the Curt Echo Under-Dash Wireless Brake Controller # C27JR to your 2022 Lexus GX 460 you'll need the Pigtail # C51515 you referenced. It doesn't look like any of our manufacturers have a plug and play adapter and when I checked the online owner's manual I didn't see a port or wiring mentioned for trailer towing so I recommend verifying the plug you found carries the functions needed for the brake controller. You will connect the following functions to these wire colors on the...
    view full answer...

  • Fit of Curt C18013 Clamp-On Bike Rack on 2014 Lexus GX460
  • The Curt # C18013 Clamp-On bike rack can indeed be used when not towing a trailer. The rack has a 135 lb total capacity. In order to carry the bikes level and to provide maximum ground clearance, I'd highly recommend an adapter bar like part # 64005 be used. The bike rack doesn't have any built-in locking mechanism, but the clamp that locks the rack on to the ball mount can be locked using a coupler lock like part # e98886. The rack includes a cable that can secure the bikes to the rack...
    view full answer...

  • Rhino Rack Roof Rack Pioneer Platform 60x49 For A 2016 Lexus GX 460
  • If you have flush side rails on your 2016 Lexus GX 460 all you need to get a Rhino Rack Platform rack on your roof is this kit # RR77AB. It comes with everything you need to get it onto your roof. Basically all there is is the platform rack and once you get that installed all you need to do is take the feet that come with the kit and connect it to the platform and then they will clamp around the flush side rails on your Lexus. If you do have a naked roof, the only roof rack option you...
    view full answer...

  • Would Rhino Rack Pioneer Platform RR42115BF Fit Crossbars of 2014 Lexus GX460
  • Since you have a set of OEM crossbars on your 2014 Lexus GX 460 the Rhino Rack Pioneer Platform Rack part # RR42115BF would fit to them directly.
    view full answer...

  • Cargo Box Compatibility With A Prinsu Roof Rack On A 2017 Lexus GX 460
  • Seems like you're needing something that is a bit skinnier on your roof since you have other attachments on your roof already. That being said this Thule Pulse Alpine Box # TH613 is only 25-1/2" wide x 88-1/2" long x 12-1/2" tall. Most cargo boxes including this one need crossbars that are no larger than # 3-5/16" wide x 1-1/2" tall so make sure your Prinsu Rack Crossbars are at least that size or smaller. Since you have so many crossbars, make sure there is at least 23-5/8" of crossbar...
    view full answer...

  • Recommended 4-Bike Platform Rack That Allows 2012 Lexus GX 460 to Open Rear Door
  • Thank you for all the information, it was very helpful. I went to our demo room to take some measurements of the Swagman XTC-4 # S64665 and based on those would not be able to confirm it would allow a 2012 Lexus GX 460 to open the rear door. If you use the attached photo (which shows the Swagman, but not on a Lexus GX 460) as a reference, you can see that at the highest point, the XTC-4 is going to be roughly 28" above the ground on a 2012 Lexus GX 460. Given a margin of error of roughly...
    view full answer...

  • Trailer Hitch That Fits 2015 Lexus GX 460
  • Yes, the Draw-Tite Trailer Hitch # 75685 will absolutely fit a 2015 Lexus GX 460; if you take a look at the accompanying photo you can see the hitch installed on a GX 460 This is a Class III, 2" trailer hitch that has a 5,000 lb towing capacity and 500 lb tongue weight capacity. It is a simple, bolt-on installation that does not require drilling into the frame of your Lexus to install; it is constructed from steel and comes with a lifetime warranty, which speaks to its durability. I have...
    view full answer...

  • Ball Mount For Curt Trailer Hitch on 2023 Lexus GX 460
  • I can't speak to the issue with your OEM ball mount, but for your 2023 Lexus GX 460, any standard ball mount for a 2" receiver will fit the Curt Trailer Hitch Receiver # C13043. It just depends on the rise or drop you need, but two options are the TowSmart Towing Starter Kit for 2" Hitches - 2" Ball - 2" Rise, 3-1/4" Drop # TS64FR or 3/4" Rise, 2" Drop # TS94FR. Both of these come with the ball mount, 2" hitch ball, and hitch lock. If you need a different rise or drop I've added a link...
    view full answer...

  • Will Curt Trailer Hitch Fit a 2022 Lexus GX 460
  • Yup! The Curt Trailer Hitch Receiver # C13043 is confirmed to fit your 2022 Lexus GX 460. We actually have a review from a neighbor who installed this on their 2022 GX 460 and they said you may need to lower the tire for the installation. We haven't had the opportunity to install this hitch on a newer model, but I'm linking our install video on a 2016 GX 460 for you to reference.
    view full answer...

  • What Landing Pad Fits Yakima Ridgeline Towers to 2011 Lexus GX 460
  • For the Yakima Ridgeline Towers part # Y00145 that fit your 2011 Lexus GX 460 the correct LandingPad is the number 30 which is part number # Y25ZR. I confirmed this with Yakima.
    view full answer...

  • Can the Stow It Utility Holder for Rhino-Rack Be Used on Toyota Factory Crossbars with a Top Channel
  • Yes, the Stow It Utility Holder for Rhino-Rack # RR95AB will fit in the slot on the top of Toyota factory crossbars. The Stow It Utility Holder for Rhino-Rack # RR95AB uses a channel nut for installation, which allows it to also work with your Toyota bars that have a top channel.
    view full answer...

  • Will Replacement 13 mm SpeedLink Mounting Hardware Assembly Fit on 67 by 23 mm Bar
  • Yes the replacement clamp part # 7521241001 would easily fit on a crossbar that measures 67 by 23 mm. It attaches by wrapping around the bar with the strap that is on the bottom of the clamp.
    view full answer...

  • 2022 Lexus GX 460 Highest Capacity Trailer Hitch Recommendation
  • All of the trailer hitches for your 2022 Lexus GX 460 has that max tongue weight of 500 lbs and max towing weight of 5,000 lbs like what you mentioned - this has been the case for the all of the recent model years of the GX 460. Out of our selection I recommend going with the etrailer Trailer Hitch # e46YR because it has a matte black finish that blends in better with your vehicle and does a better job at holding up to the elements than the standard glossy black finish does. If you were...
    view full answer...

  • Trailer Hitch That is Confirmed to Fit a 2023 Lexus GX 460
  • For a hitch that fits your 2023 Lexus GX 460, we have the etrailer Trailer Hitch Receiver # e46YR. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. It also has a matte black finish, that I personally think looks better installed on your Lexus. If you plan to do any towing, you can round out a tow...
    view full answer...