Expert Answers about Keystone Springdale Summerland Travel Trailer

• Replacement Brakes For a 2013 Keystone Summerland 2670 Travel Trailer
• I'm going to recommend upgrading to the more common 10" x 2-1/4" for your brakes on both axles. This will allow you to install the Brake Kit # AKEBRK-35-SA on each of your axles. These brakes are also self-adjusting so there is no need to manually adjust the brakes as they wear. This will require you to also switch to the larger Hub # AKHD-545-35-EZ-K as the brakes will not properly bed into your current hub/drums. When ALKO was acquired by Dexter they stopped manufacturing a lot of different...
  view full answer...


• Recommended Frame Mounted Trailer Hitch For A 73" Frame Width On A Springdale Summerland 2600
• The only hitch we currently carry that would fit a 73" frame width is the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames Item # UF35-946403. It is a weld on and has a tongue weight capacity of 350lbs. It is not rated for towing. I do not recommend using any bumper-mounted hitch receivers like the Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" BumpersItem # UF35-946401 you linked to unless you know the weight capacity of the bumper.
  view full answer...


• Trailer Hitch for Keystone Springdale Travel Trailer to Carry Bikes
• There is a way for you to carry bikes with a trailer hitch on your 2016 Keystone Springdale 270LE, though based on my research it does have a square bumper, so you would need either the Curt RV Bumper 2" Trailer Hitch # E-100 if the bumper is 4" x 4" square or the Buyers Products RV Bumper Receiver Hitch # 337RVA24 if your bumper is 4-1/2" x 4". The reason you need one of those instead of something like the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403 is because...
  view full answer...


• Black Solera XL 12 Volt Power Awning to Fit 2016 Keystone Springdale Summerland 2400 BH Can
• The closest option we have is the 13 foot version Solera XL 12V part # LCV000334926-362243 which is the black fade color and has the black arms and hardware like you are wanting. In the 12 foot size we only have the white fade option that you referenced. If 11 foot would fit better we have that option with # LCV000334909-362243.
  view full answer...


• How to Determine Correct E-Z Lube Grease Cap
• To determine the correct E-Z Lube grease cap you are going to need to measure the center of the hub where the grease cap is going to fit (please see accompanying photo). The measurement will need to be very precise, so you are going to want to use a digital caliper such as # PTW80157. You will then just compare that to the available caps. Grease Cap # RG04-040 will fit a hub bore of 1.99 inches. Grease Cap # RG04-080 will fit a hub bore of 2.44 inches. Grease Cap # RG04-120 will fit...
  view full answer...


• Can You Use Alpha Systems 4034 Roof Coating on a Superflex RV Roof
• The Alpha Systems 4034 Roof Coating for RV Roofs # AL34CV is a water based coating. It is recommended that a silicone or acrylic coating be used on Superflex material. We do have the Alpha Systems Superflex TPO RV Roof Membrane # AL68CV if you are needing to replace or patch your Superflex roof. You would also need Alpha Systems 8011 Adhesive for RV Roofs # AL27CV and Alpha Systems 1010 Non-Sag Sealant for RVs # AL28KV if you decide to go this route.
  view full answer...