For a hub and drum assembly that fits your 3,500 lb axle on your 2021 K-Z Sportsmen Classic 181BH you need the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3. If you have E-Z lube axles then you need the # AKHD-545-35-EZ-K instead.
Both of these use a # L68149 inner and # L44649 outer bearing. They have a 5 on 4-1/2 bolt pattern and use 10" brake assemblies like the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand... view full answer...
Most smaller campers like what you have use an axle rated for 2,000 lbs. If this is the case with your camper then you should be able to use the Idler Hub Assembly # AKIHUB-545-2-EZ-1K but you will need to confirm what bearings you have and the size of the grease seal that will fit with your spindle as we don't have any info on that.
This idler hub uses # L44643 inner bearings and then a grease seal # 34823 that has an inner diameter of 1.249". If you have something different then go ahead... view full answer...
If it feels like the hubs are getting too hot, one item to check is if the spindle nut is too tight and the added stress on the bearings is overheating the bearings and hub that could cause damage to the bearings. I have attached a video of our technician installing a hub on a trailer and how the spindle nut should be tightened to prevent over heating. At the 1 minute and 45 second mark you can see the hub installation.
You also will want to try adjusting your brakes since it's possible... view full answer...
Those are indeed the dimensions of the Lippert Replacement Pitch Arm Assembly, part # LC67VR. The Lippert part number for this item is 675364, so this is the exact replacement you're needing. view full answer...
According to Dexter, your 130123 axle is a 7,000 lb axle with a 91-1/2" hub face measurement and 72-1/2" spring center. I do have a solution, but unfortunately none of our 7k axles match this length. What I can offer is the Timbren Axle-Less Trailer Suspension System # TASR7KS01.
This system will fit any frame width so there is no need to match your existing axle length. It also upgrades and replaces your suspension components. For a hub and drum assembly you can use the # AKHD-865-7-2-EZ-K.... view full answer...
Though there is most likely a Dexter kit that will replace your Lippert set up, the correct one will depend on the equalizer as well. The Dexter E-Z Flex # K71-653-00, as an example, will have 2-1/4" shackle straps and the equalizer will measure 7-11/16" long and 2-7/8" tall. I included an image showing the equalizer measurements as well. Now, this would be a full replacement kit, but I do have an option to just upgrade the shackles as well.
If you take a look at the MORryde Suspension... view full answer...
It sounds like you are needing a replacement tail light for the left rear of your 2017 K-Z Connect travel trailer. If this is correct it would appear the LED Trailer Tail Light w/ Reflector and Bracket # 328-003-85L is the correct light for this model family of campers. Do be sure to check and compare this with your current lights as they may have been different for your specific model number or could have been changed out due to supply issues. We do also have the Passenger Side # 328-003-85... view full answer...
I am happy to help point you in the right direction, but I cannot recommend a step based off of just a year make and model. If only it were so easy, right? Looking at pictures of these 2013 K-Z toy haulers it appears to have a step similar to the Kwikee brand electric RV steps. For example it looks like something like part # LC3722615 which is a very common Kwikee step.
If you can provide a model number off of the current step, we can usually reference that easily enough to find specs.... view full answer...
When measuring to determine your awning size you'll want to measure the distance between the two awning arms from center to center, instead of the actual fabric. If you've got 16 feet between your awning arms, you'll want to use something like the Solera Replacement Fabric for 16 foot Roller Awnings # LCV000334399. These fabrics will work on both powerered and manual awnings made by Solera, Dometic and Carefree. If you've got a different brand awning, please let me know so I can confirm... view full answer...
I tried looking up the axle measurements for your 2018 KZ Sportsmen Classic 130RB travel trailer but I wasnt' able to locate any specs so the only option I can confidently recommend is the Timbren Axle-Less Suspension system with a lift like part # ASR2KHDS04 which is rated for 2,000 lbs and has a 4" lift. For a more standard axle recommendation I'll need to know your hub face (A) and spring seat (B) measurements that you can see in the attached photo. view full answer...
There unfortunately isn't a guide to tell us exactly what model vent you have so without this information the only option I currently have are the MaxxAir - White # MA00-335001 (Smoke # MA00-335002) or Valterra - White # A10-3375 (Black # A10-3376). These are both universal-fit lids with bolt-on hinges so that you can completely replace the old lid. view full answer...
Based on the information I could find for your 2018 K-Z Sportsmen Classic 181BH travel trailer I see it is a 3,500LB axle and uses self-adjusting brakes. If you have the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 you will need the Left # K71-681 and Right # K71-682 Brakes Shoes for your axle.
The Replacement Shoe and Lining Kit # AKBRKR-S-10 you found is for the Electric Trailer Brake Kit # AKEBRK-35-SA. If you cannot identify the brake kit you have then you will want... view full answer...
For replacement arms that fit in place of your 63" tall Solera awning arms we have the Solera Classic Universal Awning Support Arms for RVs which come both in Black # LC434715 and White # LC434716.
If you weren't needing the entire kit, go ahead and send me a photo of the part you're needing to replace so I can double check that with what's available. view full answer...
I have an option that may work out for you as we do not have any axles that will have the same hub face dimensions as your Lippert axle in your 2019 K-Z Sportsmen Classic 180TH.
You can have your drop spindle that is currently welded on your Lippert axle cut off and replace it with a #42 E-Z Lube Spindle w/ Flange # TRU37FR straight spindle. This spindle has the same dimensions as your current Lippert axle so you will still be able to use your current hubs and brakes.
You can get the... view full answer...
The part you linked to, # LC334785 does not have a speaker however, the Solera Power Awning Speaker Idler Head is, # LC342150 is available. We also have the Replacement Slip Ring Assembly, # LC330961 to replace the current slip ring assembly in your Solera Power Awning LED idler head. view full answer...
For the Solera XL 12 volt awning part # LCV000334909-362243 that you referenced we have replacement arms with the part # LC362243 which would be all that you'd need. view full answer...
The studs on your AL-KO drum should have a 1/2" diameter like the Kodiak # K12WB2 but you will need to filter through the attached link of wheel bolts to find the one that matches your stud length. These are filtered by total length but you can click on each individual page to see the length of the threaded portion to match your application. view full answer...
Sure we have plenty of replacement caps for RAM jacks, however I would need a bit more information to get you the right cap.
For instance, if you had a TJA-2000S series jack then you could use the Replacement Cap for etrailer and Ram Sidewind A-Frame Jacks # TJA-2000S-CP.
If you want to let me know a bit more of what you're working with I'd love to get you in the right direction. view full answer...
Go To Results