The Roadmaster Direct-Connect Base Plate Kit # RM-524459-5 uses a 3/4" Pins # RM-910029 to secure to the crossbar.
We do carry the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars # BX88297 that will fit with the Universal Tow Bar Adapter for Roadmaster Direct-Connect Baseplate # RM62ZR. view full answer...
The base plate length on the Master Lock Trailer Winch, part # 2953AT, will measure 8-11/16 inches and the width is 3-5/8 inches. This is the base plate on the bottom of the winch. view full answer...
Thanks for sending a picture!
I went to our warehouse to measure the brackets on the Blue Ox base plate # BX1126 to provide you the measurements you are needing. The bottom edge of the bracket measures 10-inches and the top edge measures 5-1/4 inches. The height is 8.32 inches. Take a look at the diagram I created for you.
The base plate # BX1126 will fit your 2012 Jeep Wrangler Rubicon, but it hasn't been tested with an aftermarket JCR Off-road bumper. Based on your picture though, it... view full answer...
The Roadmaster base plate kit part # RM-52300-5 that you referenced weighs a total of 48 lbs. A typical tow bar like the Falcon 2 part # RM-520 weighs 61 lbs. view full answer...
I went out to the warehouse and measured the distance between the base plate brackets on the Roadmaster XL Base Plate Kit, item # 1165-1. The distance is 28-3/8 inches on center between the mounting holes. I have posted a photo with the measurement I took added to it for you to see. view full answer...
We do not have the height measurement from the ground for the attach points for the # RM-521567-5 base plates on your 2014 CR-V, but I have attached a photo that shows where the base plates attach points are on the vehicle.
You can take a quick measurement from the ground to the middle of the opening on your front bumper and that will be as close as you can get.
I also attached a link to an installation video of this base plate kit on a 2014 CR-V you can check out. view full answer...
The Roadmaster Direct-Connect Base Plate Kit # 52923-5 uses pins that are 3/4" in diameter like the RoadMaster 3/4" Diameter Pin with Linchpin and Chain # RM-910008-00 to attach the tow bar to the base plate kit. view full answer...
The correct base plate kit for your 2009 Mini Cooper hardtop base model is the Roadmaster Crossbar-Style Base Plate Kit item # 521878-1. This will connect right to the crossbar on your Falcon 2 Tow Bar item # RM-520.
Here are a couple of other parts you will need to flat tow your 2009 Mini Cooper:
Wiring Harness - Roadmaster Tail Light Wiring Kit with Bulbs item # RM-155
Supplemental Braking System - Blue Ox Patriot Radio Frequency item # BLU37TR view full answer...
The etrailer Invisible Base Plate Kit weighs approximately 55 lbs. This is including the weight of the arms, cables and all hardware. Generally the base plate boxes are fairly easy to manage, the box will be 53" x 19" x 12". I think it is safe to say that most of our customers have these shipped directly to their home. view full answer...
Base plates # RM-521448-5 will be approximately 13-1/2 inches up from the ground to the centerline of the base plates once installed. With your Falcon All-Terrain tow bar, # RM-522, the height difference between the RV connection point and the base plates can be off-level by up to 3 inches up or down. The height on the RV is measured from the ground to the center of the receiver.
Should you find that you are outside of that 3 inches (which it does not look like it will be a problem) then... view full answer...
My contact at Blue Ox confirmed that their base plate kit # BX1989 is fine for use on your 7500-lb 2016 Ram 2500 4x4 diesel (so long as it is not the Power Wagon, for which we offer no base plates). No base plate/tow bar adapters can be used, however, so you'll need to select a properly-rated Blue Ox tow bar, such as their Alpha # BX7380. Note that your tow hooks will need to be removed.
All of the items needed for safe and legal flat towing are outlined in the linked article. view full answer...
Yes, it can but you will also need the Quick Disconnect Crossbar Assembly item # 910021-00 if you do not already have it. This will connect a Roadmaster Nighthawk Tow Bar like item # RM-676 to the Roadmaster Crossbar-Style Base Plate Kit item # RM23FR you were looking at.
The Roadmaster Base Plate Kit item # RM23FR is confirmed to fit the 2020 Chevrolet Sonic. view full answer...
On the last page of the Roadmaster base plate kit part # RM-521448-4 instructions is a chart that has torque specs for all of the hardware. For the 1/2 inch bolts like you mentioned the correct torque spec is 57 ft lbs. view full answer...
The Blue Ox Base Plate Kit # BX3619 for your 2016 Subaru Forester has a shipping weight of 52 lbs so you're looking at about 47 lbs without the packaging.
For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. If you do not have all of these components just let me know and I can make some additional recommendations for you. view full answer...
The Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 for your 2022 Jeep Wrangler have a shipping weight of 42 lbs so you're looking at about 37 lbs once the shipping materials are removed. view full answer...
The distance between the tabs of the Blue Ox base plate kit part # BLU55XR that you referenced is 20 inches and the height from the ground is 15 inches. view full answer...