There is a Cruiser Accessories Motorcycle License Plate Frame available that is fairly similar to the Nouveau plate frame you mentioned. Take a look at the Cruiser Accessories Neo, part # CR77050. You can see the frame by using the provided link. view full answer...
Unfortunately, the backpack blower rack is only available as part of the Pack'Em Expansion Pack, part # PK-OP1.
This kit holds a blower, a trimmer line spool and a cooler. I wish these were available as a separate item but they are only available in the kit. view full answer...
The Curt Class I hitch you mentioned, part # C11221 is for a 2011-2014 Chevy Volt. Due to the small size of the vehicle and the structure of the rear of the vehicle, there is only a Class I hitch with the 1-1/4 inch by 1-1/4 inch receiver opening available. A 2 inch receiver is unfortunately not available.
Since the vehicle would use a Class I hitch, the best practice would be to use a hitch mounted accessory like a bike rack or cargo carrier that is Class I compatible (see link). Using... view full answer...
I believe you are talking about the Pack'Em Rack for Open Utility Trailers part # PK-6-OP1 if that is the case we have the Accessory Holders for Pack'em Utility Trailer Towers part # PK-OP1 which will give you exactly what you want an additional cooler holder, trimmer line spool and backpack blower holder. These are not available individually but this kit will suit your needs. view full answer...
There are no E-Track fittings made specifically to support a shelf in a horizontal track such as # E19148 but Erickson and Brophy do offer track-mount storage hooks that you might adapt to this application. The various storage hook items are parts # EM59142 and # EM59141 in black, and parts # ETJS and # ETJR in galvanized finish.
Do keep in mind that the fit of these E-Track accessories in your tracks may be a bit looser than you'd want for a fixed shelf.
You can see all E-Track accessories... view full answer...
You will need to determine the beam width of your 16 foot Lund Rebel SS Boat, for the proper fit of a cover.
A boat cover I would recommend that is good for outdoor storage is the Classic Accessories Boat Cover by StormPro, part # 052963889284. This cover fits 14 foot to 16 foot long boats that have a beam width of up to 90 inches. The StormPro covers will repel water, but are not waterproof. You will want to measure your beam width to determine if this cover will work. If your beam width... view full answer...
The Classic Accessories Deluxe 4 Passenger Golf Cart Enclosure - Sand by Fairway Line, part # 052963724721, is only available in Sand. view full answer...
To get just the locks out of the etrailer Towing Accessories Kit # e99039-9 you just need the part # e99039. This includes both of the locks from the kit but nothing else. view full answer...
We do not sell any internal repair or replacement parts for performance tuners like the Edge # EP31401 (which fits your 2001 Dodge Ram with 5.9L turbo-diesel) but we do offer accessory items for use with tuners, such as mounting pod # EP38503 and exhaust gas sensor # EP98620. view full answer...
Although we no longer carry the Adco wheel covers, we have covers from Classic Accessories that would work well with the tire sizes you mentioned. For the 27.11 inch tire, I'd recommend the Classic Accessories # 052963751307. For the 28.29 inch tire, go with the Classic Accessories # 052963751406. Both part numbers are in white, and both tire covers are very highly rated by our customers. view full answer...
There are a couple of accessories for the Truck Hero Elevate Rack System part # TH92FR currently available like the Tie-Down Kit for Truck Hero Elevate Rack System - Qty 4 part # TH52FR this will give you 4 tie downs that can be put on the base sliding rails or on the cross bars themselves. They look very much like cleats like you see on a boat dock giving you the attachment point that you need to secure your cargo. They would also work as load stops to prevent whatever you have loaded... view full answer...
The Classic Accessories Portable Golf Cart Windshield, part # 052963720334 comes with a handy storage bag included.
Since we do not carry the bag as a separate item you may want to purchase the # 052963720334 and you would then have a spare windshield. view full answer...
The platform of the Classic Accessories Float Tube # CA32014 is not designed to support the weight of a person. A person sits in the "chair" of the tube basically and then you can use flippers like the part # CA63007 to move around. view full answer...
Roadmaster offers a Dual Hitch Receiver, part # RM-077-4 that has a 10,000 lb towing capacity. However, the Receiver is meant for flat towing a vehicle and carrying a hitch mounted accessory, not for towing a trailer. The top receiver has a 400 lb tongue weight capacity, which means that only 400 lbs of downward force can safely be applied to the Dual Hitch Receiver.
If you're wanting to tow a trailer and carry a hitch mounted accessory at the same time, I'd recommend using the # D210... view full answer...
An add-on lock is not available for the Curt Trailer Hitch Anti-Rattle Kit # F-315 but we do offer locking hitch pin devices for 1-1/4" accessories such as #e98879 that work with any hollow-shank ball mount or accessory. However, the # e98879 is not an anti-rattle device, only a hitch lock. view full answer...
The aftermarket accessory items we offer for a 1985 BMW 7 Series, like wiring kits, roof racks and bike carriers appear on the linked page. We also have catalytic converters such as MagnaFlow # MF23559.
I'm sorry but we don't carry vehicle OEM parts such as a specific screw or other fittings for a BMW 4HP22 transmission. These are likely to found most easily at a local dealership. view full answer...
For a 4-piece set of Thule lock cores that are all keyed alike you can use kit # TH450400. This includes the 4 lock cores, 2 matching keys and also the special control key that is used to remove and install lock cores.
These cores fit all Thule roof racks, bike carriers and other lockable accessories. view full answer...
Due to the high capacity of the 3 inch receiver, an adapter that would allow you to use a 3 inch hitch accessory in a 2-1/2 inch receiver hitch doesn't exist. By necessity, an adapter that lets you use a higher rated accessory in a lower rated hitch would need to extend out, away from the hitch. The leverage that this would apply with the accessory in place with the weight bearing down on it would damage the hitch and/or the hitch attachment points to the vehicle.
If you have two different... view full answer...
The yellow pin of the part # 277-000141 that you referenced is normally used for the reverse light circuit. This is typically used for reverse lights on the trailer or for a reverse lockout solenoid for if the trailer has surge brakes.
The 12 volt accessory circuit (black) can be used for a variety of things. Most common is a breakaway battery charge circuit or interior/exterior lighting.
I attached a review video for you to check out as well. view full answer...
The XL Anti-Rattle Trailer Hitch Receiver Lock # SHP2040-XL is our largest threaded locking hitch pin bolt. This is designed to be used with 2-1/2" hollow shank hitch accessories. It has an inside span of 3-7/8".
I recommend using Loctite Anti-Seize Stick # LT37616 to make removing the parts easier. view full answer...