Yes, the Curt Safety-Chain Loops for Gooseneck Hitches on 5th Wheel Rails # C16000 that you referenced is sold in pairs so the price is for a quantity of 2. Basically everything you see in the attached picture.
The same goes for the # RP50223. view full answer...
The SportRack Semi-Custom Roof Rack # SR1010 already includes crossbars. They are the 50" long x 1-1/4" wide x 7/8" tall square bars. You do not need to add additional crossbars to this setup. This rack system will fit a 2013 Hyundai Accent 4-door sedan.
I went ahead and attached a video that shows you the highlights of the rack system. view full answer...
According to Putco, there are four total lights included. Two of those lights install in front, also called the map lights, and the other two install as dome lights.
I have linked the a video showing installation in the map light area, and the installation instructions for you. view full answer...
The Curt Class I 1-1/4 Inch Hitch for the 2005 Elantra by Hyundai, item # C11220, comes with all of the hardware and installation instructions needed to install the hitch on your vehicle.
Some items you may need to complete your Class I towing setup are listed below.
Drawbar # 3593
Hitch Ball 1-7/8 inch, item # 19256
Hitch Ball 2 inch, item # 19258
Wiring # 119178KIT view full answer...
The WeatherTech Front Floor Liners, # WT442961, are sold as a set, one for the passenger side and one for the driver side. I have included a link to all of the floor mat options available for a 2011 Hyundai Sonata. view full answer...
All you need for attaching a brake controller to your 2022 Hyundai Palisade is the receiving-end setup.
For that setup, you need to have a 4-way and a 7-way wiring harness in order to use a brake controller. If you do not have the 4-way installed already, I recommend the Curt T-Connector Vehicle Wiring Harness # CU94FR. The T-Connector includes a powered converter to ensure that your vehicle's wiring matches that of your trailer. Once you install the 4-way (or if you already have one),... view full answer...
Advent Air Rooftop RV Air Conditioner # ACM135B is just the outside part of the air conditioner. For the inside, ceiling portion you could use # ACDB. view full answer...
White fade means that the awning fabric of the Solera Smart Arm 12V Power RV Awning # LC405523 is white closest to the RV wall and then fades to black as it gets further away from it. view full answer...
The Curt hitch part # C12241 you referenced that fits your 2020 Hyundai Tucson comes with install bolts that are sized M10-1.25 x 30.
I attached an install video for this for you to check out as well. view full answer...
Hidden Hitch, item # 60816 (no longer available), comes with drawbar, item # 3592. This drawbar has a 2-1/8 inch rise and is to be used in the rise position only on your vehicle see instructions. Class 1 hitches are factory tested for safety and the recommended drawbar is the only drawbar that should be used for that vehicle, in the position recommended. view full answer...
The Draw-Tite Class III 2 Inch Trailer Hitch, # 75684, that fits your 2010 Hyundai Santa Fe will include the complete mounting hardware kit and installation instructions.
If you are towing you will also need the Curt Ball Mount, # C45010, and the Pin And Clip, # PC3. The recommended hitch ball would be the Tow Ready 2 Inch Hitch Ball, # 19247.
The wiring harness you will need is the Tow Ready T-One Wiring Harness, # 118415. If you have the factory tow package you would use the Draw-Tite... view full answer...
The K-Source Replacement Side Mirror # KS65033Y does carry the heat, power remote, and turn signal functions but it doesn't have the lane warning function. I confirmed this with my contact at K-Source.
I also checked to see if any of the other replacement mirrors have that lane warning function and they don't so this is your best option as it carries everything else you're looking for. view full answer...
Yes, the Curt Trailer Hitch Receiver # C11529 comes with the fishwire needed to install this on your 2018 Hyundai Kona. I have attached a picture of the included hardware for you to reference.
If you let me know what you will be using this trailer hitch for I can make additional recommendations as necessary. view full answer...
Wiring and hitches are sold separately because not everyone uses a hitch for towing. Trailer hitches for the 2011 Hyundai Veracruz such as # 75532 include the hitch and the hardware to install it.
For the trailer wiring you can use harness # C56332 to add a 4-Way flat connector to the rear of the vehicle.
I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes... view full answer...
You assume correctly, the Pewag Servo # PWRS69 chains are sold in pairs. Before purchasing or installing chains, please check your owner's manual to see if Hyundai has any specific recommendations about using tire chains.
Once you get the chains, it's a good idea to do a dry run or two so that when the time comes, you'll know how to install them. I'd rather you learn in your garage or on your driveway than when you're up to your ears in a snow drift.
I've linked you to our FAQ article... view full answer...
Purchasing a hitch for your 2021 Hyundai Kona EV such as the Draw-Tite # DT52GR Class 3 hitch will indeed include all necessary installation hardware and printed instructions, which I've linked for you. view full answer...
The Westin Sure-Grip Running Boards, # 27-6115-1845, comes with the running boards for each side of the vehicle and the custom mounting kit and hardware to fit your 2011 Hyundai Santa Fe. There is nothing else you will need to get to install the bars (assuming you have a set of tools to perform the installation). view full answer...
Yes, the Swagman Trailhead 2 Bike Rack, # S63360, comes with an anti-rattle, threaded hitch pin and clip which will secure the rack to your trailer hitch.
I have attached a short video for you. view full answer...
The ball mount that comes with Hidden Hitch trailer hitch # 60301 (no longer available) for your 2016 Hyundai Accent hatchback is # 3592. On a Class I trailer hitch like this you have to use the ball mount specified by the hitch manufacturer or it voids the hitch warranty. The ball mount must be used in the rise position only.
For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring use # C56254. Please note that the vehicle owner's manual states that... view full answer...
I checked with Yakima and the replacement brackets alone - without the hardware - is not available as a replacement part. So you will get the brackets and the hardware when ordering the Replacement Mounting Brackets for Yakima RoadShower # Y8881255.
We can't remove pieces of a kit and retroactively apply a discount, you'll need to get the brackets with the hardware. view full answer...