Yes the Curt Trailer Connector Adapter with Backup Alarm # C57102 does for your 2021 Hyundai Palisade. It would plug into a 4-way that fits your vehicle like the part # CU94FR.
You will need to do some hardwiring to install a brake controller like the Brake EVN part # TK63VR which I attached a link on this topic for more info on. view full answer...
I would be happy to help you. Both the Curt hitch item # C13427 and the etrailer item # e95ZR are identical hitches except for the powder coat. They each weigh 34 lbs and are confirmed to fit a 2022 Hyundai Palisade. They each have a 5,000 lbs towing capacity and a 750 lbs tongue weight.
Out of these two hitches, I recommend the etrailer item # e95ZR. This hitch has a matte powder coated finish that blends in nicely when installed. The finish also provides great rust protection. view full answer...
Yes! You can use 2 sets of the Rhino-Rack Kayak Carrier # S512-S512X to transport 4 kayaks on your crossbars. Since one of these sets takes up roughly 20" of crossbar space, you need to have al least 40" of usable crossbar length on your roof rack to accommodate 2 of the # S512-S512X. You do not need to worry about additional straps because the carriers come with all the straps you need.
If you need a compatible crossbar system with the length you need, the parts you need depend on if... view full answer...
The Curt T-Connector Vehicle Wiring Harness # C43FV is custom fit for your 2023 Hyundai Palisade. This uses the factory style connectors used on the tail lights for your Palisade so you will not have to splice any of your trailer wiring. It does require a power wire to run to your battery. This is needed to prevent excessive draw on the factory tail light wiring since power for the trailer lights will come directly from the battery. view full answer...
Yes, you can use the Thule Arcos Enclosed Cargo Carrier # TH25YE on your 2022 Hyundai Palisade with Curt hitch. The cargo carrier fits both 1-1/4" and 2" hitches. view full answer...
The correct trailer hitch for a 2020 Hyundai Palisade is the Curt Class III Trailer Hitch Receiver part # C13427. This trailer hitch is rated for up to 5,000 lbs and it offers a completely bolt-on installation. The best part of all is that it has a hidden design which means only the receiver tube is shown, not the cross tube as you can see in the attached photo. The Curt Class III Trailer Hitch Receiver is also fairly easy to install and should only take around 45-90 minutes or so.
If... view full answer...
You should have no issues fitting the Thule Motion XT Rooftop Cargo Box # TH629906 to a factory roof rack on your Hyundai Palisade. This box is designed to fit with standard-sized factory crossbars that have a crossbar spread range of 23-5/8" to 36-7/8" and a rear hatch clearance of 55". From what I could find it looks like your crossbar spread should be 32" and your rear hatch clearance should be about 71" which is more than enough.
If these specs don't quite match up with what you have... view full answer...
The Thule Fit Kit # TH83CE is compatible with your 2022 Hyundai Palisade as long as it has the flush mounted rails. To complete the rack set up you need the Flush Rail Feet # TH710601 and Thule WingBar Evo Crossbars # TH711320. view full answer...
Yes, the Thule Pulse Large Rooftop Cargo Box - 16 cu ft - Matte Black, part # TH615, should have no problem fitting on the roof of your 2022 Hyundai Palisade. It will easily attach to your factory crossbars, but I do have some measurements to ease your mind. If your factory crossbars are less than 1-1/2" tall, 3-5/16" wide, and have a crossbar spread between 23-5/8" - 34-3/8", this rooftop cargo box will fit your vehicle. You need to make sure you have at least 46-3/8" from the center... view full answer...
I would be happy to help you and understand the concern you have. The Curt item # C13427 has 11" of ground clearance from the bottom of the 2" x 2" hitch receiver. This hitch is confirmed to fit your 2023 Palisade and bolts to it with included hardware.
The etrailer Hitch item # e95ZR has a slightly higher ground clearance at 13-1/2". This hitch is also confirmed to fit the 2023 Palisade.
If you are planning on towing you will also need a wiring harness item # 119250KIT and a ball mount... view full answer...
To install a 7-Way harness on your 2024 Hyundai Palisade you will need two separate wiring harnesses because they don't make just one that provides a 7-way.
The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item # C43FV. This custom-fit T-connector plugs into your Hyundai's wiring harness, which is located behind the tail lights. This will provide you with a 4-flat connector.
The second harness you will need is the Universal Installation Kit for Trailer Brake... view full answer...
Yes, the etrailer Hitch Receiver # e95ZR is confirmed to fit all models of the 2022 Hyundai Palisade, including the Calligraphy. This Class III hitch has a 2" receiver with a maximum gross trailer weight of 5,000 lbs so it will be perfect for towing your trailer. It also has a concealed cross tube so only the receiver will be visible, helping to maintain a factory look.
For a complete towing setup you will also need wiring and a ball mount. The Curt T-Connector Vehicle Wiring Harness #... view full answer...
The Curt T-Connector Vehicle Wiring Harness # CU94FR is designed to connect to the factory tow package wiring which was removed from your 2023 Hyundai Palisade. This connector was included on all Palisades in previous years. For your Palisade you will need the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # C59496 to splice into the tail light wiring. view full answer...
We do have the Curt Trailer Hitch Receiver # C13427 which is confirmed to fit your 2023 Hyundai Palisade. For the wiring you will need the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # C59496. Hyundai removed the factory style connector used on previous years from models which do not have the factory tow package. This ModuLite will allow you to tie into the tail light wiring to add a 4-way flat connector. The Curt Mounting Bracket # C58001 will allow you to secure... view full answer...
Yes, when using the Towing Kit w/ Ball Mount and Trailer Wiring for Stealth Hitches # 391CONVPT5L with the Stealth Hitches Hidden Rack Receiver # 391HYUNPALIS19 you can swap out the hitch ball.
The Towing Kit w/ Ball Mount and Trailer Wiring for Stealth Hitches # 391CONVPT5L drawbar works with a hitch ball that has a 1" diameter shank. The 2" Hitch Ball - 1" Rise - 1" Diameter # C40033 you asked about has a 1" diameter shank and will work with the drawbar for the Stealth Hitches. view full answer...
The only trimming required when installing the etrailer Trailer Hitch Receiver # e95ZR on your 2023 Hyundai Palisade is to the underbody panels. You will not have to trim any of the rear bumper fascia for this installation. I have linked an installation video below which shows the entire installation process with trimming the underbody panels.
I recommend installing the 4-Way Harness # C59236 when you install the receiver. This will give you the connector most commonly used on small trailers... view full answer...
Welcome back! I have a couple of options for you depending on what is currently on your Palisade's roof. If your 2020 Hyundai Palisade has a naked roof you will need the following parts to mount two Thule Hullavator item # TH898.
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06145
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06138
Yakima JetStream Crossbar - Aluminum... view full answer...
We do indeed have a trailer hitch receiver as well as a 4-way wiring harness fit for your 2023 Hyundai Palisade; the correct parts are the following:
- etrailer Trailer Hitch Receiver # e95ZR
- 4-Pole Flat Trailer Connector # C59236
This gives you a hitch with a 2 inch receiver and nice hidden look, as the crosstube will be hidden under the bumper, so your Palisade is going to maintain its factory appearance. view full answer...
The Stealth Hitches Hidden Rack Receiver part # 391HYUNPALIS19 is an excellent option for a 2020 Hyundai Palisade. It is certainly one of the most well thought out and designed hitches for this vehicle. In regards to fit with the rear bumper fascia, there should be no pressure at all on with the rack accessory installed. It does have a nice and tight fit under the bumper but there should be no stress on the material.
The install video I have attached for you below does a great job of... view full answer...
Go To Results