A brake controller is going to need to be hardwired into your 2002 Holiday Rambler Endeavor because there is no plug available. In order to do this (since I assume it already has a 6-pin wiring harness in the back) you will need to cut that and connect it to the Universal Brake Controller Wiring Kit # ETBC7 using a circuit tester such as # PTW2993 to test the functions. You will also likely need extra wire # 10-2-1 and butt connectors # DW05745-10 for this installation. I have added links... view full answer...
For your 2004 Holiday Rambler Endeavor, I recommend you use a 7-way instead of a 6-way and get a connector like the 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring - Vehicle End # HM40975-11998. This kit will give you the trailer connector, the mount, the butt connectors and the ring terminal for installation.
The wiring of this trailer connection is as follows and I recommend using a circuit tester like # PTW2993 to ensure you match function to function on... view full answer...
The brake controller wiring you need is terminated in a connector under the left side control panel next to the driver seat of your 2007 Holiday Rambler Endeavor. There is no quick install harness for your RV though. There should be a cover on the vertical side of the panel facing the driver seat and the connector will be behind it. There should be a 12 volt power wire (run black wire here), a ground wire (white wire), a brake switch wire (red wire) and a brake output circuit (blue wire)... view full answer...
Go To Results