Expert Answers about GMC Yukon
- Compatibility of Derale # D13950 Atomic-Cool Remote Mount Transmission Cooler with 2012 Yukon XL.
- As long as you have the available space in the area where you want to install the cooler, you can certainly use the # D13950 Atomic Cool Transmission Cooler on your 2012 Yukon. Keeping the transmission cool when you're moving in stop-and-go traffic is exactly what this particular cooler is designed for.
The # D13035 you already have is the recommended fitting. You'll want to install the cooler in the return line heading back to the transmission, whether that line's coming from the radiator...
view full answer... - Largest Yakima Skybox Roof Cargo Box for 2011 Yukon Denali for Transporting Skis
- Thank you for the photo of the roof rack on your 2011 GMC Yukon Denali.
These elliptical-shape bars will work great with the Yakima Skybox 21 rooftop cargo box # Y07337 so long as their size does not exceed 3-1/2-inches wide x 1-11/16-inches tall and so long as they can be positioned apart between 24- and 42-inches (measured from the center of one bar to the center of the other).
The rear hatch will be able to open fully without interference with the box so long as you have at least...
view full answer... - Recommended Flat Towing Equipment For A 2016 GMC Yukon
- The Roadmaster Falcon 5250 tow bar you have will work with Roadmaster base plates but it is not rated to tow your 2016 GMC Yukon. That tow bar is rated for 5,000lbs and the curb weight of the 2016 Yukon is 5,379 to 5,626lbs with nothing loaded into it. Instead I recommend the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10K Item # RM-422. It has plenty of weight capacity and a non-binding design that allows you to release your vehicle at any time,...
view full answer... - Blue Ox Weight Distribution System and the Brackets Needing to be 29" Away from the Ball Center?
- On the Blue Ox Weight Distribution System item # BLU66FR the 29" inch measurement point is the center of the bracket. There is some margin for the placement of the bracket because of the chains holding the torsion bars. However, there has to be tension on the bars for them to work properly.
There are several different bars available for the Blue Ox systems like item # BLU25FR this set has a lower weight rating for a smoother ride when you're pulling a lighter load. All the Blue Ox bars...
view full answer... - Yakima HD Roof Rack and LockNLoad Fitment on a 2021 GMC Yukon AT4
- The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts:
60" HD Crossbars - # Y01157
HD Bar SL Adapter - # Y03541
SightLine Towers - # Y64AR
SightClip Fit Kit - # Y44UV
Lock Core Kit - # Y07204 (optional)
This will work great with the Yakima LockNLoad Platform Rack for Crossbars # Y45UV, but we still need to talk about the weight ratings as you do bring up a great point.
The Yakima HD bars are actually rated for...
view full answer... - How to Install Draw-Tite Activator IV on a 2013 GMC Yukon XL SLT
- The Draw-Tite Activator IV # 5504 will work with your 2013 GMC Yukon XL SLT. There isn't an adapter that fits your vehicle but you do have blunt cut wires that will be under your driver's side dash to the right where you can connect the harness # 20127.
I attached an installation video of the Prodigy P2 # 90885 brake controller on a 2013 GMC Yukon XL which installs the exact same way. Connect the following wires from the brake controller/harness to the following blunt cut wires on your...
view full answer... - What Suspension Enhancement Is Confirmed To Fit a 2021 GMC Yukon SLT?
- At this time the Coil SumoSprings Custom Helper Springs # CSS-1168F are the only suspension enhancement confirmed to fit a 2021 GMC Yukon SLT. This will only fit on the front suspension of 2 wheel drive Yukon's. The Timbren # TGMRCK25S you found is for the 1999-2006 Silverado/Sierra 1500/2500 trucks which use leaf spring suspension and not coil springs like your Yukon.
view full answer... - Recommended Crossbars for a 2023 GMC Yukon AT4
- The good news is that since the Yakima LockNLoad Platform Rack for Crossbars # Y45UV installs onto a set of crossbars, it'll sit up higher on your roof - which won't interfere with your sunroof.
For a roof rack, I recommend going with the Thule WingBar Evo Crossbars # TH711520, with the Evo Flush Rail Feet for Thule Crossbars # TH710601 and the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet # TH95JW.
These crossbars not only look great, but they'll preform great for...
view full answer... - What Ski/Snowboard Carriers are a Direct Fit for a Factory Roof Rack on a 2011 GMC Yukon Denali XL
- According to Yakima, the Replacement Mounting Hardware for Yakima PowderHound, Big PowderHound or FreshSesh, # Y8860040, will fit your 2011 GMC Yukon Denali XL factory crossbars that run side to side. There are also several carriers that are a direct fit to the factory crossbars on a 2011 GMC Yukon Denali XL.
The FatCat EVO 6, # Y03096 will fit. It carries up to 6 skis or 4 snowboards and includes locks.
view full answer... - Will K Source Towing Mirrors Work On 2006 GMC Yukon Denali With Turn Signals On OEM Mirrors
- I have attached a photo of the K Source Custom Towing Mirrors, part # KS80800 you can check out. As you can see, these mirrors have the clips that attach to the inside edge of the mirror you have on your 2006 GMC Yukon Denali. If the body of the mirror covers up your turn signals on your mirrors, these may not be the mirrors for you.
If you find that the # KS80800 mirror will interfere with the turn signals, you can check out part # KS3891. This is a universal fit clip-on mirror that can...
view full answer... - Will the etrailer Cargo Carrier e98874 Fit on a 2012 Yukon GMC Denali
- To find out whether or not the etrailer Cargo Carrier # e98874 will fit on your 2012 GMC Yukon you will need to take a few measurements.
When the cargo carrier is folded down the center of the hitch pin hole to the closest edge of the carrier is 19-1/2 inches. When you fold the carrier up that distance changes to 9-1/2 inches. If you go out to your Yukon and the distance from the center of your hitch pin hole to the closest part of your vehicle is less than 9-1/2 inches and you have a...
view full answer... - Towing a Trailer with a 2018 GMC Yukon
- I can help you with what you need to tow a trailer with your 2018 GMC Yukon, but from my research we do not carry a hitch for that vehicle because they include a factory trailer hitch. Your vehicle likely came with a factory tow package hidden under a cover in the center of the rear bumper. You should be able to remove that cover to reveal the trailer hitch receiver.
You may also want to double check if your vehicle came with a wiring harness. We offer several quality wiring harnesses...
view full answer... - Hitch Clearance On A 1996 GMC Yukon With Roll Pan
- If you were to get the Curt Class IV Hitch Receiver # C14029 it may fit your 1996 GMC Yukon with a roll pan but to be sure, here are some measurements. From the mounting plates to hitch receiver top (height) it's 2-1/2 inches and from the bottom of the hitch receiver (Height) it's 5-1/4 inches. From the receiver end to the closest mounting hole (length) it's 7 inches and there is 17-1/2 inch width from center of mounting hole to center of the receiver.
On a stock 1998 Yukon, from the...
view full answer... - Replacement Driver Side Mirror for a 2007 Yukon XL Denali
- The CIPA replacement mirror # CM27352 is designed to fit in place of GM part 15179830. Check your stock mirror to determine if it is the same part number.
The CIPA mirror has power glass operation and heat features but is not listed as a power folding mirror or with turn signals. I have linked a video to the right of this mirror for you.
view full answer... - Towing Mirrors for 2016 GMC Yukon
- There are a pair of towing mirrors that fit your 2016 GMC Yukon, but not from CIPA.
The only fit is from K-Source, the Snap-On # KS80920; please note that these will NOT fit models with telescoping mirrors, OR stock mirrors equipped with additional lighting features that are NOT flush to the mirror, such as LED turn signals, automatic dimming, and puddle lights.
view full answer... - Flat Towing Setup For 2016 GMC Yukon Denali
- As long as the 2016 GMC Yukon Denali has 4WD with a two-speed transfer case that has a Neutral and 4 wheel drive low setting, you can flat tow it with all 4 wheels on the ground behind the 2018 Allegro Bus. If the GMC has 2WD, it has to be towed with a dolly with the rear wheels off the ground. When flat towing or dolly towing, the battery does need to be disconnected. You can use a Roadmaster quick battery disconnect part # RM-766. The Roadmaster battery disconnect allows you to wire in...
view full answer... - Recommended Trailer Hitch Receiver for 2003 GMC Yukon
- Yes, the Curt Trailer Hitch Receiver item # C15324 will fit your 2003 GMC Yukon. Depending on your trim package and how low it goes below your bumper you may have to cut an opening in your trim for the receiver to be accessed.
view full answer... - Availability of a Door Latch That Will be Compatible on an 1 Inch Thick Door
- I found a latch for your enclosed trailer door. The Full Size Lockable Steel Flush Door Latch, # L3980, will mount in a 3-3/8 x 4-5/8 inch hole and will work on doors up to 1-1/16 inches thick.
view full answer... - Cover For Cargo Area That Extends From Front Seats To End Of Cargo Area
- The only custom fit cover that we carry for the 2018 GMC Yukon that extends from the back of the front seats to the end of the cargo area is Canine Covers part # DCL6360PF. The Canine Covers allow you to either fold down the back seats and lay the cover flat or fold up the back seats up and place the cover over the back of them. I have attached a video for your reference. The Canine Cover for the Yukon also comes in various colors and designs, I have attached a link of all the Canine Covers...
view full answer... - How to Measure the Receiver Hitch Opening on a 2007 GMC Denali AWD for Drawbar Selection
- Yes, when measuring the hitch opening on your 2007 GMC Denali AWD, you will want to measure the inside dimension of the hitch opening. I have provided a link to information on measuring your hitch opening and selecting a ball mount for you to review.
The Self-Locking Adjustable Aluminum Ball Mount, # DTALBM7000, with up to 11 inch rise or 10 inch drop, is designed to fit in a 2 inch receiver opening and would work on your Denali. This ball mount has a deep drop and tall rise for your...
view full answer...
Go To Results