Yes, the Access tonneau cover part # A92329 does fit over truck beds like yours that have a factory bed liner. I attached a picture of this installed on a truck and you can see the bed liner. view full answer...
The only other custom style mirrors aside from the Longview # LO54FR for your 2020 GMC Sierra 1500 are the K-Source # KS80930 and they have the cutout at the back of the housing as well.
Attached is an installation video of these on a 2020 Chevy Silverado 1500 that you can check out. view full answer...
There were a couple of bases available for the Demco FWH-24P 5th wheel hitch. If you have the one that attaches to industry standard rails, the UL base, you will want the Demco Above-Bed Base Rails and Custom Installation Kit item # DM8552034-71.
If yours has the SL base, which required vertical rails, then there isn't a way to reuse this hitch on your 2021 GMC Sierra 1500. You'll need to upgrade to a newer hitch capable of being mounted to industry standard rails. The Demco Premier Series... view full answer...
There is an air bag kit that will work with your truck but since you have Magna Ride the Air Lift item # AL89204 will not. None of the Air Lift kits are compatible, so I recommend the Firestone Ride-Rite Air Helper Springs item # F2430. These air springs have a comparable 4,800 lbs load leveling capacity.
To compensate for your 6" lift you will need a spacer and to find out which one you will have to take a measurement. You'll want to make sure that your Sierra is level with all the wheels... view full answer...
There are a few Edge tuners that fit both a 2006 GMC Sierra with a 5.3L V8 engine that will also work on a 2014 GMC Sierra 1500 with a 5.3L V8 engine; I will link the ones that will fit both trucks for you so you can compare them to what you have:
- Edge Gas Evolution CTS2 Performance Tuner # EP39YR
- Edge Gas Evolution CS2 Performance Tuner # EP85350
- Edge EvoHT2 Hand-Held Performance Tuner # EP26040 view full answer...
In order to shut off the active fuel management system (AFM) on a 2018 GMC Sierra 1500 with 6.2 engine you will want to use the Edge EvoHT2 Hand-Held Performance Tuner part # EP26041. In addition to disabling the active fuel management system (AFM), the Edge EvoHT2 can also provide increase in horsepower and torque up to 25 HP and 43 TQ respectively. view full answer...
In order to mount a Demco Hijacker FWH24 on a 2018 GMC Sierra 1500 you'll need the Demco Hijacker Premier Series Custom Mounting Brackets part # DM8552027 and Replacement Rails for Demco Hijacker 5th Wheel Trailer Hitch part # DM6014.
Please note, this option only works if the hitch previously used rails which mounted left to right and not front to back. view full answer...
There was a pretty big change between the 2020 GMC Sierra Crew Cabs and the previous year trucks so a new fit had to be made for the running boards so you'd need a new set like with the DeeZee part # DZ16322-16340. view full answer...
The Firestone Ride-Rite Air Helper Springs # F2609 are compatible with your 2020 GMC Sierra Denali 1500 4wd having the adaptive ride control. The adaptive ride control uses sensors to monitor the wheel position with the body and adjusts rebound and dampening on the shocks to give a better ride. The air springs will not cause a harsher ride like some other systems.
The Firestone # F2186-2047 will also work with your Sierra. The sensor on it detects ride height changes and will increase... view full answer...
Yes, you can install a B&W Turnoverball hitch in your 2020 GMC Sierra 1500 with Carbon Pro bed. The correct hitch for your truck is the # BWGNRK1019. view full answer...
We have a great option for a boat trailer jack that is going to easily swivel with the Fulton XLT jack. Keeping in mind that all jack wheels can struggle turning if there is too much weight on them, the XLT has a very high-quality caster and wheel and is designed with easy maneuverability in mind.
The jack is designed to fit 3" x 3" or 3" x 4" trailer frames:
- Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt-On - Sidewind - 10" Lift - 1,500 lbs # F26ZR
I have added some customer reviews... view full answer...
The base of the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-782 isn't going to be compatible with a WeatherTech AlloyCover. The edge of this cover overlaps the bedrails and would prevent the installation of the ladder rack base or any other ladder rack. You'd have to remove the cover to install the # TH43002XT-782. This rack only works with covers that sit inside of the bedrails so you'd need one like the BAKFlip MX4 Hard Tonneau Cover # BAK448130. view full answer...
While you are correct that the hitch you have on your 2015 GMC Sierra 1500 is one of the factors for finding the correct camper tie-downs, but most work with both factory hitches and non-torklift aftermarket hitches. You only need more specific tie-downs when you have a TorkLift aftermarket hitch, which you likely do not have.
The HappiJac Truck-Mounted Camper Tie-Downs # LC350763-182971 are frame mounted tie-downs that will fit the 5-1/2', 6-1/2' and 8' bed. They also fit with or without... view full answer...
Yes, you can use a weight distribution hitch with the Air Lift Ride Control Air Helper Springs # AL59565.
Just be sure to first air up the helper springs and then set up the weight distribution hitch. This combo will give you a nice combination of stabilization and leveling for a much improved towing experience. view full answer...
The correct Tow Defender will depend more on the base plate kit that you have, rather than the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676.
You will most likely need the Roadmaster Tow Defender Protective Screening # RM-4750 which fits Roadmaster motorhome-mounted tow bars with direct connect base plate kits and Roadmaster bumper mounted D-rings.
You would only need the Roadmaster Tow Defender Protective Screening # RM-4700 if you have a crossbar style base plate kit... view full answer...
To add a gooseneck hitch to your 2021 GMC Sierra 1500 you are going to want the Custom Underbed Installation Kit for B&W Companion 5W Hitch item # BWGNRK1019-5W. The underbed install kit gives you the gooseneck hitch plus the added option for a 5th wheel hitch if you ever need one.
Please note this will not fit the carbon bed models.
To make towing with a gooseneck easier I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness item # C53CR. This harness puts a 7-way connector... view full answer...
You are not wrong about the standard cab. I think the official title of the product is "under seat storage box" but it can be used for regular cab applications without a back seat as well. As long as the spare tire jack is the stock jack, and not an aftermarket or add on, the # WT85WR storage bin will fit with no issue. I did confirm this with my contact at WeatherTech to make sure. view full answer...
We had a customer come back and tell us that after the install of the Curt Front Hitch part # C31069 that you end up losing right at 1.3 inches of ground clearance. Since not all vehicles will sit at the exact height it's easier to determine the exact ground clearance you'd have by taking the 1.3 inches and subtracting it from the clearance you currently have. view full answer...