The weather strip does not need to be removed prior to the installation of the # MR38RR. As long as you have the required gap of at least 3/8" between the threshold and the bottom of the door it is unlikely the weather strip will cause a problem. If you find that the door is not closing properly following installation you made need to trim it slightly for a better fit. view full answer...
It is possible that the wires are already ran and you won't have to worry about running wire, it's worth looking into before committing to running wires; the best way to obtain this information is to get your VIN number, and contact the trailer manufacturer.
If it turns out that your trailer isn't pre-rigged, then you can use a 12v power source like a battery, and run a black wire for your power and a white wire for your ground to your MaxxFan Deluxe # MA00-07500K. The black wire must... view full answer...