bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Forest River Salem Travel Trailer


  • Furrion 2-Zone RV Soundbar With Bluetooth Controls Not Working
  • For your Furrion 2-Zone Soundbar # FSB2N25MCBL there is no reset button. You can unplug the soundbar from its power connection for 5 minutes and plug back in to reset it. If your controls still will not work I recommend contacting the service department that you bought your 2021 Forest River Salem from to have it replaced under warranty.
    view full answer...

  • Troubleshooting Ram Jack Not Extending or Retracting With Power or By Hand
  • It sounds like your 3,500 lb Electric Jack w/ Footplate # EJ-3520-BBX has a bad internal screw. Since you've tried to operate it both electronically with the buttons as well as mechanically with the manual override you've been able to rule everything else out (good job!). Unfortunately it doesn't look like this is a replaceable part so you'll have to replace the jack entirely and for that I recommend either part # EJ-3520-BBX for an exact replacement or the Ultra-Fab Phoenix # UF38-944040...
    view full answer...

  • Troubleshooting Freezer Fan Issue on Everchill RV Refrigerator with Freezer
  • The Everchill RV Refrigerator w/ Freezer - 10 Cu Ft - 12V - Stainless Steel # 324-000119 has a thermostat located on the back interior wall of the freezer. If that doesn't help your freezer operate correctly, then we can do further troubleshooting. The freezer fan may not run all the time for proper function, so if your freezer is keeping things at the proper temp I wouldn't worry about it. If it will not keep things frozen, then I recommend checking the power input on the back of the...
    view full answer...

  • Troubleshooting a 12 Volt Fan Switch That Overheats And Shuts Off
  • A Replacement Wall Switch # 344410TSSW12V may or may not fix your problem. It will come down to what exactly is causing the switch to overheat. If the 12V RV Ceiling Fan like # 344410TSDC36BNOKCY is pulling more power than it should do to a damaged fan it will cause the new switch to overheat as well. You will need a Multimeter # PT89ZR to test the power going to the fan motor. This fan is rated at 20 watts of 12 volt power which will be 1.67 amps of power(be sure to check your fan for...
    view full answer...