When you purchase the replacement hardware kit for your TracRac Ladder Rack part # TH27000XT it should come with the following:
4 Steel pocket nuts
(8) 3/8" Long safety bolts
(4) 3" Long socket-head cap screws
30 Plastic access plugs
6 Nylon Washers
But the rubber expansion blocks # TARB-11032-1 that go into your truck bed stake pockets you will need to purchase separately. view full answer...
The Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black # 311-SWFA06A29, which fits on your 2020 Ford F-150, weighs about 70-lbs, so it's effect on the payload is minimal. The installation/removal process is also relatively easy because of the lighter weight for a retractable cover and should take about 10 mins. view full answer...
The only other part that comes in the package of your TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLR3501 apart from the parts you mentioned is the metal pin/clip that attaches the tie-down shank into the receiver shank. I went ahead and attached a video that shows all of the parts included.
If this is not the part you are inquiring about, I would be happy to assist you if you respond to this answer with a photo of the extra part. view full answer...
I am happy to inform you that all of the mounting hardware is included with the Aries Round Nerf Bars for the 2019 Ford Ranger, part # AA69FB.
The installation instructions are linked below. In them, you will see all of the parts. view full answer...
Tire chains are typically solid in pairs, so you've got the required chains for an axle. The Konig Standard Snow Tire Chains - Diamond Pattern - D Link - XB16 - Size 245 Item # TH01571245 are sold in pairs, so if you wanted to have them for all 4 tires you'd need to order 2 sets of these. These are a great choice though because the diamond D-link pattern help provide much better traction than traditional ladder style chains.
I've linked a review video of these for you to check out as well. view full answer...
Yes, tire and wheel combos such as # TTWA14RWS will come with the tire already mounted on the wheel. I have linked a video review of this tire and wheel combo for you. view full answer...
To flat tow a vehicle you will need at least 5 items: base plates, tow bar, safety cables, lighting, and supplemental braking. For base plates I recommend # 427-3 because they fit both GT and non-GT models of the 1994 Ford Escort.
For a compatible tow bar you can use the Falcon 2 # RM-520. Or for a more economical option you can use the Tracker # RM-020. If you go with the Tracker tow bar you will also need quick disconnects # RM-201 to make it easily removable.
For either tow bar you... view full answer...
The SumoSprings Solo Custom Helper Springs - Rear Axle, # SSR-117-47, are sold as a pair. It is suspension enhancement for the rear axle on both sides of your truck. These springs are a great upgrade to your factory suspension for improved control and comfort. They are progressive load assist, so the heaver the load, the more they compress to support the load. The springs work independently of each other to compensate for off-center loads and reducing body roll during sharp turns. They... view full answer...
Yes, the Westin R5 Nerf Bars # 28-51285 that are confirmed to fit your 2022 Ford Ranger SuperCab include everything needed for installation. The Westin R5 Nerf Bars # 28-51285 includes the nerf bars, mounting brackets and custom installation kit.
We also have the LED Light Kit for Westin R5 Nerf Step Bars # W74FQ available to illuminate your step bar and door sill area using LED lights. view full answer...
The RV Bunk Bed Safety Net for Children # OBE94FR comes with the same mounting hardware no matter what it's being installed on.
This comes with 4 sheet metal screws that are #8 x 1.25" and then 8 truss head screws and are #8 x 0.75". The sheet metal screws are for the footman loops and the truss head screws are for the net.
Hope this helps! view full answer...
The trailer wiring harness is not included with the Draw-Tite Max-Frame Trailer Hitch Receiver, part # 75782. This is because the hitch can be used on 2013 to 2016 Ford Escapes and the vehicles may have different requirements for wiring harnesses.
The trailer wiring harness I recommend for your 2016 Escape is part # 118566. Because your Escape has separate wiring (brake and turn signals are sent along separate wires. A powered converter module is required to safeguard the vehicle's wiring... view full answer...
Yes, the Westin Fey Surestep Deluxe XLT Rear Bumpers with custom installation kits, such as # 21007-92230, do come with installation instructions in the package. view full answer...
Yes, the TorkLift 30K SuperHitch Magnum Trailer Hitch Receiver # TLF1003-30, confirmed to fit your 2007 Ford F-550 with the 34-1/2 inch Cab and Chassis frame, will include the main hitch receiver, hitch reducer sleeve (2-1/2 to 2 inch), mounting brackets, pins, clips and all the necessary hardware to install it on your truck.
Accessories like a shank # TLM9000, ball mount # ED208, or hitch lock # e98880 would be sold separately. view full answer...
Yes it does - the Lippert Thin Shade Complete Window Kit # LC806621 does come with the Window Release Keys (which are part # LC429436), as you can see by the cut out of the manual I added for you.
The Thin Shade Window Kit # LC806621 also comes with the inner frame, outer frame, window glass and shade. view full answer...
The Curt Custom Base Rail Kit you referenced, part # C16424-204 includes the frame brackets, bed mounted rails, and all necessary hardware to complete the installation.
The install kit, less the bed rails is available as part # C16424. If the bed rails off of your old truck are the Curt brand, you can reuse them. We don't recommend using frame brackets and bed rails from differing manufacturers. They have not been tested together, and therefore their weight capacity would be unknown which... view full answer...
Take a look at the Hopkins Semi-Custom Auto Floor Mats - PVC - Front/Rear - Gray # HM79101. these are a semi custom set for the front and rear seats.
Then for the cargo area you could use the WeatherTech Cargo Liner - Gray # WT42471. view full answer...
On a 2017 Ford Transit T250 without a factory trailer connector there is no brake controller adapter. What you would need to add a brake controller is wiring, the 4-Way # C56327 and 7-Way Brake Controller Install Kit # ETBC7.
This kit gets plugged into connection points behind your T250's tail lights and would splice into your vehicle's wiring so to allow you to simply plug in to a high-quality brake controller such as the Prodigy P3 # 90195. view full answer...
No, the Curt Class II hitch receiver # C12076 does not include a ball mount, hitch pin or clip. You will need to add a hitch ball of appropriate size to match your trailer and a pin and clip # F-4.
I have included a link to our page for Class II hitch balls with the required 3/4-inch shank diameter (to match the supplied ball mount which has a 3/4-inch ball hole). With this link you can select a Class II hitch ball of the appropriate size to match your trailer coupler, either 1-7/8 inch... view full answer...
Here are the outlets you will get with our generator # 333-0001-2:
(1) 120V 20-amp
(1) 120V 30-amp L5-30R
(1) 5V 2.1-amp USB
We provide a TT-30R adapter so you will not have to purchase the adapter, but if you do not have a power chord for the 30 amp connection, you will need to grab one. This one is 25' long so you can keep your generators far away from whatever your powering to keep the noise down.
I've included a couple videos if you would like to learn more! view full answer...