Part # TLF2022 consists of 2 TorkLift front tie-down inserts, frame brackets, and the necessary mounting hardware. The rear kit only for the 2017 Ford F-350 is part # TLF3008. Both of these are a confirmed fit for the 2017 F-350 with 6-3/4 Foot Bed, without board or step underneath truck bed and with a factory installed hitch. These will not fit trucks with factory flip-out steps that are mounted under the bed. view full answer...
Excellent question, and there is anti-corrosion protection for the aluminum bed of your 2018 Ford F-150 that comes with the B&W base rails and install kit that fits your truck, though it is not in the form of shims. What the kit comes with is a roll of polypropylene tape that is used for the parts of the kit that touch the bed. The correct fit for your '18 F-150 is the following:
- B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # BW39FR
I have added a cut out... view full answer...
The Fold-Down Gooseneck Trailer Hitch with Installation Kit, # 8339-4438, comes with the hitch, the installation kit, and the hardware needed to install it in the following trucks.
2003 - 2005 Dodge Ram Pickup 6 Foot Bed, 1500 Series
2006 - 2008 Dodge Ram Pickup 6 Foot Bed, 1500 Series, except Mega Cab
2003 - 2008 Dodge Ram Pickup 8 Foot Bed, 1500 Series
I have included a link to the installation details for you to review. Basically, you would install the rails first. The rails in this... view full answer...
The TorkLift Custom Frame-Mounted Camper Tie-Downs such as the Front # TLC2219 and Rear # TLC3215 that fit a 2016 Chevy Silverado 3500 Crew Cab without board or step underneath truck bed do come in pairs. They come with 2 tie-down inserts, frame brackets, and installation hardware; I've added links to video reviews of both products for you to take a look at. view full answer...
When you order the step bars for a particular vehicle, the specific installation kit for that vehicle is included. You will not need to order a separate installation kit. He have a lot of step bar options for your 2010 Toyota Tacoma Double Cab, long bed. I have included a link to them for you to view. view full answer...
No. The Bestop TrekStep Side Mounted Truck Step - Aluminum # B7540015 is a single step that can be installed on either the driver's or passenger side of your 2019 Silverado 1500 LD. If you purchased 2 of these though, you could install one on each side of the truck.
I've linked a short review video of these steps for you to check out. view full answer...
I checked with Westin first to verify fit for your truck and the E-Series tube steps, # 23-3150 will fit a 2012 Chevy Colorado crew cab. The steps do come with the the correct vehicle specific mounting brackets to install them on your truck. view full answer...
The Replacement Hardware for Westin Signature Series 3" and Platinum Series Round Step Bars # 25-168PK you were looking at includes all of the replacement hardware and brackets to mount two Westin 3" Round Nerf Bars.
If you can tell me the Year/Make/Model of your vehicle I would be happy to confirm if the # 25-168PK is the correct hardware for you. view full answer...
I have pulled one of the HitchMate Truck Step Extendable Hitch mounted step for 2 inch hitches # HE4045 from the warehouse and the HitchMate Logo on the step is black lettering on the black background. You have indicated this is your preference so this should work out great for you.
I have also contacted the manufacturer and confirmed that the logo is only imprinted on the hitch step itself and is a black logo on the black background. The packaging shows the logo as being white but my... view full answer...
The base rails that are designed to fit the 2018 Fort F-150 (5-1/2 foot bed) - Ford Super Crew Trucks # TH21508 come with the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs # TH43002XT-508. The Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks # TH21610 are designed to fit only Short Bed Toyota Tundra Trucks only. view full answer...
The Access Custom Truck Bed Mat # A25040239 unfortunately doesn't have a matching tailgate rug but the BedRug Impact Truck Bed Liner # BR79FR (5-1/2' bed) or # BR29VR (6-1/2' bed) both come with full bed and tailgate protection. This 3/4" thick cover will cushion and protect your bed from hard impact and provide an anti-skid surface to help keep the items you're hauling from sliding around.
I've attached a short video below where Evangeline will walk you through the features of this cover.
If... view full answer...
The DeeZee Truck Bed Auxiliary Tank # DZ91752X does not include hardware. I contacted DeeZee to see if they have any recommendations and they do not. You can use any hardware that fits your truck and your liking. view full answer...
The Westin Tube Steps, # 23-2320, does include the specific mounting brackets and hardware for your 2008 Dodge Ram, regular cab. I have also included a link to all of the step options for your truck. Each one will come with the mounting brackets and hardware. view full answer...
The Access Custom Truck Bed Mat # A35VA for your 2023 Honda Ridgeline is a single piece mat. Since the mat is flexible you will still be able to access your in bed trunk with the mat in place. view full answer...
The Bestop EZ Fold Folding Tonneau Cover # B1602401 consists of just the bow/fabric/clamp unit which can be installed/removed as one piece. The cover does not include nor does it require rail caps to be present on the truck. You can refer to the linked video for illustration of how the cover installs. We do not offer the rail caps. view full answer...
For your 2024 Chevrolet Silverado 3500, you can use the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC3221.
There are currently no front tie downs available for your vehicle, however they are expected to be available at some point, just have not been confirmed yet. You are also going to need a set of turnbuckles # TLS9529 to secure your camper to the tie downs. view full answer...
For the Aries steps that fit your 2007 F-150 you will use kit # AA4504 which consists of 4 brackets and hardware. You can see this kit in the linked photo.
The Aries Custom Fit Mounting Bracket kit # AA4507 that you referenced works with the 6-inch oval tube steps that fit the Ford F-250/350/450/550 Super Duty trucks. view full answer...
Yes the Custom Fit Mounting Brackets for Aries 6" Oval Tube Steps Item # AA4490 include the hardware. They are designed to fit Aries 6" Oval Side Bars for various 2005 to 2017 Chevy/GM trucks and SUVs. view full answer...
Since your 2017 Ram 3500 has an 8' bed the BAKFlip MX4 Hard Tonneau Cover # BAK48204 will be a quad-fold. Trucks that have a bed over 6' long will be quad-fold while trucks that have a bed under 6' long will be a tri-fold. I've sent an update to have the tri-fold part of our page corrected.
The part 448204 is the BAK part number while 48204 is the exact same thing on our end, we just add the BAK letters in front of it for our labeling.
Attached is a review video for you to check out. view full answer...
Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-000 does include the black rails that mount into the stake pockets of your 2004 GMC Sierra bedrails and allow the towers to slide.
I've attached a review video below where Ryan will go over the features of this product and show you installation and usage of this product. view full answer...