The Chicago Bears Trailer Receiver Cover, part # FTHB005S will require either a pin and clip, part # PC3, or a hitch lock, such as part # 40107. The pin and clip or hitch lock are not involved with the electrical system, they hold the hitch cover or other accessory in place. view full answer...
Yes, you do need a hitch pin and clip like the Pin and Clip, # PC3, or a lock like the Trailer Hitch Receiver Lock, # e98880, to keep it in the hitch. You do not need both of them.
A hitch cover gets inserted into the 2 inch receiver hitch. Then either the pin and clip or the receiver lock would be inserted through both the hole in the hitch and the wire brackets on the back of the hitch cover to keep it in the hitch.
The lock uses a key to open it and is a good choice to prevent somebody... view full answer...
When it comes to a standard hitch pin and clip for your motorcycle carrier, I recommend The Hitch Pin and Clip for 2 inch Hitches - 5/8 inch Diameter x 2-7/8 inch Span # 37201074.
This pin has a sturdy steel construction that is corrosion-resistant and has a chrome-plated finish. This hitch pin will help secure your motorcycle carrier to your trailer hitch. It will fit a 2 inch by 2 inch hitch receiver and has a pin diameter of 5/8 inches, with a useable length (span) of 2-7/8 inches.... view full answer...
The Curt # 13040 takes a standard 5/8" hitch pin, so if you just need a standard hitch pin and clip without a lock you can use the Hitch Pin and Clip for 2" Hitches - 5/8" Diameter x 2-7/8" Span # 37201074. If you're looking for a locking hitch pin then I recommend using the etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span - Chrome # e98881. view full answer...
For your 2021 Subaru Ascent, with the etrailer Trailer Hitch Receiver # e35ZR, I recommend using the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers # e99047.
This is a locking hitch pin that can be keyed alike to match other etrailer branded locks, so you don't have to carry around a bunch of keys.
A locking hitch pin is a much better option than a traditional pin and clip that increases security and theft prevention, however if you still wanted a traditional pin and... view full answer...
We offer replacement retaining clips # 58029 for the Reese uplift brackets.
These clips would be for the newer Reese weight distribution systems made in August 2006 or later. view full answer...
Yes, the Chicago Bulls NBA Hitch Cover # OHCC2203 includes a plastic clip to hold the cover in the 2-inch hitch. The clip sides engage with the hitch pin hole in the receiver tube to prevent the cover from dropping out but it is not a lock. A lock such as # e98880 will make it impossible for a thief to remove the cover. view full answer...
The replacement locking pin to replace the pin and clip for # AM3461, is InfiniteRule Lock Set for Andersen Rapid Hitch Adjustable Ball Mounts - Stainless Steel - Qty 2 # 34061405-D. This set is made for the specifications of your Rapid Hitch Steel Ball Mount. view full answer...
The Firefighter Collage Trailer Hitch Cover, part # SHC805, does not require a locking pin, but you can use one to prevent theft of the hitch cover.
The hitch cover can be installed and held in place with your existing hitch pin and clip or you can use the Hidden Hitch Pin and Clip, part # PC3.
If you want to lock the hitch cover to your hitch you can use the etrailer Hitch Lock, part # e98880. view full answer...
If you are looking at the Draw-Tite # 24960 (sedan models only), you will need a hitch pin that is compatible with a 1-1/4 inch receiver. For that part, you need the Curt Hitch Pin and Clip for 1-1/4" Hitches # F-4. As for the Draw-Tite # 76209 (5-door wagon with single exhaust models only), you will need a hitch pin that is compatible with a 2-inch receiver. For that part, you need the Pin and Clip for 2" # PC3. view full answer...
The drawbar (also known as a ball mount or stinger) fits into the trailer hitch receiver and gets fitted with a ball. This would be used to tow a trailer. If you never plan on using the 2013 Buick Encore for towing then you will not need a ball mount or ball.
Most hitch accessories like bike racks come with a hitch pin or thread hitch bolt so a pin may not be needed either. A regular hitch pin, like # PC2, is held into place with the included clip which is similar to a cotter pin. You... view full answer...
Sounds like you are looking for pins to connect your Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000 lbs # AM3200 to a set of rails.
You can use the following parts to secure your hitch to a set of industry standard above the bed rails.
Fifth Wheel Hitch Replacement Pins and Clips (Qty 4) # 6014. view full answer...
The Carpod Walled and Folding Cargo Carrier does not come with a hitch pin clip. The basic hitch pin clips that you will need is part # PC3.
For added security and to help deter theft you can use the Let's Go Areo Anti-Rattle Hitch Receiver Lock # 63232.
If you were wanting to add some security to your cargo carrier, I recommend using the Master Lock Padlock # ML312D for when the top is closed. view full answer...
Yes, the Trophy Whitetail Hitch Cover, item # 034092100485, does slide into any 2 inch trailer hitch receiver. You will need either a pin and clip, item # PC3, or a hitch lock, recommended, to secure the cover into your trailer hitch. I have listed a couple of locks below for the 2 inch Receiver.
Trailer Hitch Receiver Lock - Flush Design for 2 inch Trailer Hitches, # e98880
Tow Ready LifeLong 2 inch Trailer Hitch Receiver Lock - Stainless Steel - Push Button, # e98882 view full answer...
Locking pins are not included in the Gen-Y 2-1/2-Inch Adjustable 2-Ball Mount # 325-GH-624 since it is easy to remove the hitch ball for safe storage. The ball mount includes Gen-Y Hitch Pin and Clip # 325-GH-099 for easy removal of the ball. But if you wish to add a lock you can use extra-long hitch lock # RH5-XL. I measured the mount to confirm this will work. view full answer...
When it comes to replacing the L pins on The Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 pounds GTW, 1,000 pounds TW # C17500 The Replacement L-Pins and Clips for Curt TruTrack Weight Distribution System w/ Sway Control - Qty 2 # C17513 is the correct replacement.
These L-Pins replace the pins and clips from the systems below:
8,000-lb GTW system ( # C17499)
10,000-lb GTW system ( # C17500)
15,000-lb GTW system ( # C17501)
I attached a review video... view full answer...
You can either use a standard Pin and Clip # PC2 or a Locking Hitch Pin # e98879 to secure the 1-1/4" end of the Curt Hitch Receiver Adapter # C45785. view full answer...
I may have a solution for you, but the screw in ball for the adjustment pin is not an available replacement part. With that said, you can use the Replacement Adjustment Pin and Clip for Rapid Hitch AM3400 Series # AM3431 as a new pin that does not have the screw in ball on top of it. view full answer...
As long as the hitch on the vehicle has 2 inch by 2 inch inside measurement then the Green Bay Packers NFL Tailgater 2 inch Trailer Hitch Cover, item # AH-40264, will fit in the hitch and you will need either the Pin and Clip For Class III, IV and V Trailer Hitch, item # PC3, or a hitch lock like the Trailer Hitch Receiver Lock - Flush Design for 2 inch Trailer Hitches, item # e98880.
If the inside measurement of the hitch is 1-1/4 by 1-1/4 inches, unfortunately we don't offer a Green... view full answer...